• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/arch/x86/kernel/
1/*
2 * This is a good place to put board specific reboot fixups.
3 *
4 * List of supported fixups:
5 * geode-gx1/cs5530a - Jaya Kumar <jayalk@intworks.biz>
6 * geode-gx/lx/cs5536 - Andres Salomon <dilinger@debian.org>
7 *
8 */
9
10#include <asm/delay.h>
11#include <linux/pci.h>
12#include <linux/interrupt.h>
13#include <asm/reboot_fixups.h>
14#include <asm/msr.h>
15#include <linux/cs5535.h>
16
17static void cs5530a_warm_reset(struct pci_dev *dev)
18{
19	/* writing 1 to the reset control register, 0x44 causes the
20	cs5530a to perform a system warm reset */
21	pci_write_config_byte(dev, 0x44, 0x1);
22	udelay(50); /* shouldn't get here but be safe and spin-a-while */
23	return;
24}
25
26static void cs5536_warm_reset(struct pci_dev *dev)
27{
28	/* writing 1 to the LSB of this MSR causes a hard reset */
29	wrmsrl(MSR_DIVIL_SOFT_RESET, 1ULL);
30	udelay(50); /* shouldn't get here but be safe and spin a while */
31}
32
33static void rdc321x_reset(struct pci_dev *dev)
34{
35	unsigned i;
36	/* Voluntary reset the watchdog timer */
37	outl(0x80003840, 0xCF8);
38	/* Generate a CPU reset on next tick */
39	i = inl(0xCFC);
40	/* Use the minimum timer resolution */
41	i |= 0x1600;
42	outl(i, 0xCFC);
43	outb(1, 0x92);
44}
45
46struct device_fixup {
47	unsigned int vendor;
48	unsigned int device;
49	void (*reboot_fixup)(struct pci_dev *);
50};
51
52static const struct device_fixup fixups_table[] = {
53{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
54{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
55{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
56{ PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset },
57};
58
59/*
60 * we see if any fixup is available for our current hardware. if there
61 * is a fixup, we call it and we expect to never return from it. if we
62 * do return, we keep looking and then eventually fall back to the
63 * standard mach_reboot on return.
64 */
65void mach_reboot_fixups(void)
66{
67	const struct device_fixup *cur;
68	struct pci_dev *dev;
69	int i;
70
71	/* we can be called from sysrq-B code. In such a case it is
72	 * prohibited to dig PCI */
73	if (in_interrupt())
74		return;
75
76	for (i=0; i < ARRAY_SIZE(fixups_table); i++) {
77		cur = &(fixups_table[i]);
78		dev = pci_get_device(cur->vendor, cur->device, NULL);
79		if (!dev)
80			continue;
81
82		cur->reboot_fixup(dev);
83		pci_dev_put(dev);
84	}
85}
86