• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/arch/mips/include/asm/mach-db1x00/
1/*
2 * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
3 *
4 * All Alchemy development boards (except, of course, the weird PB1000)
5 * have a few registers in a CPLD with standardised layout; they mostly
6 * only differ in base address and bit meanings in the RESETS and BOARD
7 * registers.
8 *
9 * All data taken from the official AMD board documentation sheets.
10 */
11
12#ifndef _DB1XXX_BCSR_H_
13#define _DB1XXX_BCSR_H_
14
15
16/* BCSR base addresses on various boards. BCSR base 2 refers to the
17 * physical address of the first HEXLEDS register, which is usually
18 * a variable offset from the WHOAMI register.
19 */
20
21/* DB1000, DB1100, DB1500, PB1100, PB1500 */
22#define DB1000_BCSR_PHYS_ADDR	0x0E000000
23#define DB1000_BCSR_HEXLED_OFS	0x01000000
24
25#define DB1550_BCSR_PHYS_ADDR	0x0F000000
26#define DB1550_BCSR_HEXLED_OFS	0x00400000
27
28#define PB1550_BCSR_PHYS_ADDR	0x0F000000
29#define PB1550_BCSR_HEXLED_OFS	0x00800000
30
31#define DB1200_BCSR_PHYS_ADDR	0x19800000
32#define DB1200_BCSR_HEXLED_OFS	0x00400000
33
34#define PB1200_BCSR_PHYS_ADDR	0x0D800000
35#define PB1200_BCSR_HEXLED_OFS	0x00400000
36
37
38enum bcsr_id {
39	/* BCSR base 1 */
40	BCSR_WHOAMI	= 0,
41	BCSR_STATUS,
42	BCSR_SWITCHES,
43	BCSR_RESETS,
44	BCSR_PCMCIA,
45	BCSR_BOARD,
46	BCSR_LEDS,
47	BCSR_SYSTEM,
48	/* Au1200/1300 based boards */
49	BCSR_INTCLR,
50	BCSR_INTSET,
51	BCSR_MASKCLR,
52	BCSR_MASKSET,
53	BCSR_SIGSTAT,
54	BCSR_INTSTAT,
55
56	/* BCSR base 2 */
57	BCSR_HEXLEDS,
58	BCSR_RSVD1,
59	BCSR_HEXCLEAR,
60
61	BCSR_CNT,
62};
63
64/* register offsets, valid for all Db1xxx/Pb1xxx boards */
65#define BCSR_REG_WHOAMI		0x00
66#define BCSR_REG_STATUS		0x04
67#define BCSR_REG_SWITCHES	0x08
68#define BCSR_REG_RESETS		0x0c
69#define BCSR_REG_PCMCIA		0x10
70#define BCSR_REG_BOARD		0x14
71#define BCSR_REG_LEDS		0x18
72#define BCSR_REG_SYSTEM		0x1c
73/* Au1200/Au1300 based boards: CPLD IRQ muxer */
74#define BCSR_REG_INTCLR		0x20
75#define BCSR_REG_INTSET		0x24
76#define BCSR_REG_MASKCLR	0x28
77#define BCSR_REG_MASKSET	0x2c
78#define BCSR_REG_SIGSTAT	0x30
79#define BCSR_REG_INTSTAT	0x34
80
81/* hexled control, offset from BCSR base 2 */
82#define BCSR_REG_HEXLEDS	0x00
83#define BCSR_REG_HEXCLEAR	0x08
84
85/*
86 * Register Bits and Pieces.
87 */
88#define BCSR_WHOAMI_DCID(x)		((x) & 0xf)
89#define BCSR_WHOAMI_CPLD(x)		(((x) >> 4) & 0xf)
90#define BCSR_WHOAMI_BOARD(x)		(((x) >> 8) & 0xf)
91
92/* register "WHOAMI" bits 11:8 identify the board */
93enum bcsr_whoami_boards {
94	BCSR_WHOAMI_PB1500 = 1,
95	BCSR_WHOAMI_PB1500R2,
96	BCSR_WHOAMI_PB1100,
97	BCSR_WHOAMI_DB1000,
98	BCSR_WHOAMI_DB1100,
99	BCSR_WHOAMI_DB1500,
100	BCSR_WHOAMI_DB1550,
101	BCSR_WHOAMI_PB1550_DDR,
102	BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
103	BCSR_WHOAMI_PB1550_SDR,
104	BCSR_WHOAMI_PB1200_DDR1,
105	BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
106	BCSR_WHOAMI_PB1200_DDR2,
107	BCSR_WHOAMI_DB1200,
108};
109
110/* STATUS reg.  Unless otherwise noted, they're valid on all boards.
111 * PB1200 = DB1200.
112 */
113#define BCSR_STATUS_PC0VS		0x0003
114#define BCSR_STATUS_PC1VS		0x000C
115#define BCSR_STATUS_PC0FI		0x0010
116#define BCSR_STATUS_PC1FI		0x0020
117#define BCSR_STATUS_PB1550_SWAPBOOT	0x0040
118#define BCSR_STATUS_SRAMWIDTH		0x0080
119#define BCSR_STATUS_FLASHBUSY		0x0100
120#define BCSR_STATUS_ROMBUSY		0x0400
121#define BCSR_STATUS_SD0WP		0x0400	/* DB1200 */
122#define BCSR_STATUS_SD1WP		0x0800
123#define BCSR_STATUS_USBOTGID		0x0800	/* PB/DB1550 */
124#define BCSR_STATUS_DB1000_SWAPBOOT	0x2000
125#define BCSR_STATUS_DB1200_SWAPBOOT	0x0040	/* DB1200 */
126#define BCSR_STATUS_IDECBLID		0x0200	/* DB1200 */
127#define BCSR_STATUS_DB1200_U0RXD	0x1000	/* DB1200 */
128#define BCSR_STATUS_DB1200_U1RXD	0x2000	/* DB1200 */
129#define BCSR_STATUS_FLASHDEN		0xC000
130#define BCSR_STATUS_DB1550_U0RXD	0x1000	/* DB1550 */
131#define BCSR_STATUS_DB1550_U3RXD	0x2000	/* DB1550 */
132#define BCSR_STATUS_PB1550_U0RXD	0x1000	/* PB1550 */
133#define BCSR_STATUS_PB1550_U1RXD	0x2000	/* PB1550 */
134#define BCSR_STATUS_PB1550_U3RXD	0x8000	/* PB1550 */
135
136
137/* DB/PB1000,1100,1500,1550 */
138#define BCSR_RESETS_PHY0		0x0001
139#define BCSR_RESETS_PHY1		0x0002
140#define BCSR_RESETS_DC			0x0004
141#define BCSR_RESETS_FIR_SEL		0x2000
142#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
143#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
144#define BCSR_RESETS_PB1550_WSCFSM	0x2000
145#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
146#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
147#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
148#define BCSR_RESETS_DMAREQ		0x8000	/* PB1550 */
149
150#define BCSR_BOARD_PCIM66EN		0x0001
151#define BCSR_BOARD_SD0PWR		0x0040
152#define BCSR_BOARD_SD1PWR		0x0080
153#define BCSR_BOARD_PCIM33		0x0100
154#define BCSR_BOARD_PCIEXTARB		0x0200
155#define BCSR_BOARD_GPIO200RST		0x0400
156#define BCSR_BOARD_PCICLKOUT		0x0800
157#define BCSR_BOARD_PCICFG		0x1000
158#define BCSR_BOARD_SPISEL		0x4000	/* PB/DB1550 */
159#define BCSR_BOARD_SD0WP		0x4000	/* DB1100 */
160#define BCSR_BOARD_SD1WP		0x8000	/* DB1100 */
161
162
163/* DB/PB1200 */
164#define BCSR_RESETS_ETH			0x0001
165#define BCSR_RESETS_CAMERA		0x0002
166#define BCSR_RESETS_DC			0x0004
167#define BCSR_RESETS_IDE			0x0008
168#define BCSR_RESETS_TV			0x0010	/* DB1200 */
169/* Not resets but in the same register */
170#define BCSR_RESETS_PWMR1MUX		0x0800	/* DB1200 */
171#define BCSR_RESETS_PB1200_WSCFSM	0x0800	/* PB1200 */
172#define BCSR_RESETS_PSC0MUX		0x1000
173#define BCSR_RESETS_PSC1MUX		0x2000
174#define BCSR_RESETS_SPISEL		0x4000
175#define BCSR_RESETS_SD1MUX		0x8000	/* PB1200 */
176
177#define BCSR_BOARD_LCDVEE		0x0001
178#define BCSR_BOARD_LCDVDD		0x0002
179#define BCSR_BOARD_LCDBL		0x0004
180#define BCSR_BOARD_CAMSNAP		0x0010
181#define BCSR_BOARD_CAMPWR		0x0020
182#define BCSR_BOARD_SD0PWR		0x0040
183
184
185#define BCSR_SWITCHES_DIP		0x00FF
186#define BCSR_SWITCHES_DIP_1		0x0080
187#define BCSR_SWITCHES_DIP_2		0x0040
188#define BCSR_SWITCHES_DIP_3		0x0020
189#define BCSR_SWITCHES_DIP_4		0x0010
190#define BCSR_SWITCHES_DIP_5		0x0008
191#define BCSR_SWITCHES_DIP_6		0x0004
192#define BCSR_SWITCHES_DIP_7		0x0002
193#define BCSR_SWITCHES_DIP_8		0x0001
194#define BCSR_SWITCHES_ROTARY		0x0F00
195
196
197#define BCSR_PCMCIA_PC0VPP		0x0003
198#define BCSR_PCMCIA_PC0VCC		0x000C
199#define BCSR_PCMCIA_PC0DRVEN		0x0010
200#define BCSR_PCMCIA_PC0RST		0x0080
201#define BCSR_PCMCIA_PC1VPP		0x0300
202#define BCSR_PCMCIA_PC1VCC		0x0C00
203#define BCSR_PCMCIA_PC1DRVEN		0x1000
204#define BCSR_PCMCIA_PC1RST		0x8000
205
206
207#define BCSR_LEDS_DECIMALS		0x0003
208#define BCSR_LEDS_LED0			0x0100
209#define BCSR_LEDS_LED1			0x0200
210#define BCSR_LEDS_LED2			0x0400
211#define BCSR_LEDS_LED3			0x0800
212
213
214#define BCSR_SYSTEM_RESET		0x8000	/* clear to reset */
215#define BCSR_SYSTEM_PWROFF		0x4000	/* set to power off */
216#define BCSR_SYSTEM_VDDI		0x001F	/* PB1xxx boards */
217
218
219
220
221/* initialize BCSR for a board. Provide the PHYSICAL addresses of both
222 * BCSR spaces.
223 */
224void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
225
226/* read a board register */
227unsigned short bcsr_read(enum bcsr_id reg);
228
229/* write to a board register */
230void bcsr_write(enum bcsr_id reg, unsigned short val);
231
232/* modify a register. clear bits set in 'clr', set bits set in 'set' */
233void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
234
235/* install CPLD IRQ demuxer (DB1200/PB1200) */
236void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq);
237
238#endif
239