1/* 2 NetWinder Floating Point Emulator 3 (c) Rebel.COM, 1998,1999 4 (c) Philip Blundell, 2001 5 6 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> 7 8 This program is free software; you can redistribute it and/or modify 9 it under the terms of the GNU General Public License as published by 10 the Free Software Foundation; either version 2 of the License, or 11 (at your option) any later version. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21*/ 22 23#ifndef __FPOPCODE_H__ 24#define __FPOPCODE_H__ 25 26 27/* 28ARM Floating Point Instruction Classes 29| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 30|c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT 31|c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|1|0| o f f s e t | CPDT (copro 2) 32| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 33|c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO 34|c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT 35|c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons 36| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 37 38CPDT data transfer instructions 39 LDF, STF, LFM (copro 2), SFM (copro 2) 40 41CPDO dyadic arithmetic instructions 42 ADF, MUF, SUF, RSF, DVF, RDF, 43 POW, RPW, RMF, FML, FDV, FRD, POL 44 45CPDO monadic arithmetic instructions 46 MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP, 47 SIN, COS, TAN, ASN, ACS, ATN, URD, NRM 48 49CPRT joint arithmetic/data transfer instructions 50 FIX (arithmetic followed by load/store) 51 FLT (load/store followed by arithmetic) 52 CMF, CNF CMFE, CNFE (comparisons) 53 WFS, RFS (write/read floating point status register) 54 WFC, RFC (write/read floating point control register) 55 56cond condition codes 57P pre/post index bit: 0 = postindex, 1 = preindex 58U up/down bit: 0 = stack grows down, 1 = stack grows up 59W write back bit: 1 = update base register (Rn) 60L load/store bit: 0 = store, 1 = load 61Rn base register 62Rd destination/source register 63Fd floating point destination register 64Fn floating point source register 65Fm floating point source register or floating point constant 66 67uv transfer length (TABLE 1) 68wx register count (TABLE 2) 69abcd arithmetic opcode (TABLES 3 & 4) 70ef destination size (rounding precision) (TABLE 5) 71gh rounding mode (TABLE 6) 72j dyadic/monadic bit: 0 = dyadic, 1 = monadic 73i constant bit: 1 = constant (TABLE 6) 74*/ 75 76/* 77TABLE 1 78+-------------------------+---+---+---------+---------+ 79| Precision | u | v | FPSR.EP | length | 80+-------------------------+---+---+---------+---------+ 81| Single | 0 | 0 | x | 1 words | 82| Double | 1 | 1 | x | 2 words | 83| Extended | 1 | 1 | x | 3 words | 84| Packed decimal | 1 | 1 | 0 | 3 words | 85| Expanded packed decimal | 1 | 1 | 1 | 4 words | 86+-------------------------+---+---+---------+---------+ 87Note: x = don't care 88*/ 89 90/* 91TABLE 2 92+---+---+---------------------------------+ 93| w | x | Number of registers to transfer | 94+---+---+---------------------------------+ 95| 0 | 1 | 1 | 96| 1 | 0 | 2 | 97| 1 | 1 | 3 | 98| 0 | 0 | 4 | 99+---+---+---------------------------------+ 100*/ 101 102/* 103TABLE 3: Dyadic Floating Point Opcodes 104+---+---+---+---+----------+-----------------------+-----------------------+ 105| a | b | c | d | Mnemonic | Description | Operation | 106+---+---+---+---+----------+-----------------------+-----------------------+ 107| 0 | 0 | 0 | 0 | ADF | Add | Fd := Fn + Fm | 108| 0 | 0 | 0 | 1 | MUF | Multiply | Fd := Fn * Fm | 109| 0 | 0 | 1 | 0 | SUF | Subtract | Fd := Fn - Fm | 110| 0 | 0 | 1 | 1 | RSF | Reverse subtract | Fd := Fm - Fn | 111| 0 | 1 | 0 | 0 | DVF | Divide | Fd := Fn / Fm | 112| 0 | 1 | 0 | 1 | RDF | Reverse divide | Fd := Fm / Fn | 113| 0 | 1 | 1 | 0 | POW | Power | Fd := Fn ^ Fm | 114| 0 | 1 | 1 | 1 | RPW | Reverse power | Fd := Fm ^ Fn | 115| 1 | 0 | 0 | 0 | RMF | Remainder | Fd := IEEE rem(Fn/Fm) | 116| 1 | 0 | 0 | 1 | FML | Fast Multiply | Fd := Fn * Fm | 117| 1 | 0 | 1 | 0 | FDV | Fast Divide | Fd := Fn / Fm | 118| 1 | 0 | 1 | 1 | FRD | Fast reverse divide | Fd := Fm / Fn | 119| 1 | 1 | 0 | 0 | POL | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm) | 120| 1 | 1 | 0 | 1 | | undefined instruction | trap | 121| 1 | 1 | 1 | 0 | | undefined instruction | trap | 122| 1 | 1 | 1 | 1 | | undefined instruction | trap | 123+---+---+---+---+----------+-----------------------+-----------------------+ 124Note: POW, RPW, POL are deprecated, and are available for backwards 125 compatibility only. 126*/ 127 128/* 129TABLE 4: Monadic Floating Point Opcodes 130+---+---+---+---+----------+-----------------------+-----------------------+ 131| a | b | c | d | Mnemonic | Description | Operation | 132+---+---+---+---+----------+-----------------------+-----------------------+ 133| 0 | 0 | 0 | 0 | MVF | Move | Fd := Fm | 134| 0 | 0 | 0 | 1 | MNF | Move negated | Fd := - Fm | 135| 0 | 0 | 1 | 0 | ABS | Absolute value | Fd := abs(Fm) | 136| 0 | 0 | 1 | 1 | RND | Round to integer | Fd := int(Fm) | 137| 0 | 1 | 0 | 0 | SQT | Square root | Fd := sqrt(Fm) | 138| 0 | 1 | 0 | 1 | LOG | Log base 10 | Fd := log10(Fm) | 139| 0 | 1 | 1 | 0 | LGN | Log base e | Fd := ln(Fm) | 140| 0 | 1 | 1 | 1 | EXP | Exponent | Fd := e ^ Fm | 141| 1 | 0 | 0 | 0 | SIN | Sine | Fd := sin(Fm) | 142| 1 | 0 | 0 | 1 | COS | Cosine | Fd := cos(Fm) | 143| 1 | 0 | 1 | 0 | TAN | Tangent | Fd := tan(Fm) | 144| 1 | 0 | 1 | 1 | ASN | Arc Sine | Fd := arcsin(Fm) | 145| 1 | 1 | 0 | 0 | ACS | Arc Cosine | Fd := arccos(Fm) | 146| 1 | 1 | 0 | 1 | ATN | Arc Tangent | Fd := arctan(Fm) | 147| 1 | 1 | 1 | 0 | URD | Unnormalized round | Fd := int(Fm) | 148| 1 | 1 | 1 | 1 | NRM | Normalize | Fd := norm(Fm) | 149+---+---+---+---+----------+-----------------------+-----------------------+ 150Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are 151 available for backwards compatibility only. 152*/ 153 154/* 155TABLE 5 156+-------------------------+---+---+ 157| Rounding Precision | e | f | 158+-------------------------+---+---+ 159| IEEE Single precision | 0 | 0 | 160| IEEE Double precision | 0 | 1 | 161| IEEE Extended precision | 1 | 0 | 162| undefined (trap) | 1 | 1 | 163+-------------------------+---+---+ 164*/ 165 166/* 167TABLE 5 168+---------------------------------+---+---+ 169| Rounding Mode | g | h | 170+---------------------------------+---+---+ 171| Round to nearest (default) | 0 | 0 | 172| Round toward plus infinity | 0 | 1 | 173| Round toward negative infinity | 1 | 0 | 174| Round toward zero | 1 | 1 | 175+---------------------------------+---+---+ 176*/ 177 178/* 179=== 180=== Definitions for load and store instructions 181=== 182*/ 183 184/* bit masks */ 185#define BIT_PREINDEX 0x01000000 186#define BIT_UP 0x00800000 187#define BIT_WRITE_BACK 0x00200000 188#define BIT_LOAD 0x00100000 189 190/* masks for load/store */ 191#define MASK_CPDT 0x0c000000 /* data processing opcode */ 192#define MASK_OFFSET 0x000000ff 193#define MASK_TRANSFER_LENGTH 0x00408000 194#define MASK_REGISTER_COUNT MASK_TRANSFER_LENGTH 195#define MASK_COPROCESSOR 0x00000f00 196 197/* Tests for transfer length */ 198#define TRANSFER_SINGLE 0x00000000 199#define TRANSFER_DOUBLE 0x00008000 200#define TRANSFER_EXTENDED 0x00400000 201#define TRANSFER_PACKED MASK_TRANSFER_LENGTH 202 203/* Get the coprocessor number from the opcode. */ 204#define getCoprocessorNumber(opcode) ((opcode & MASK_COPROCESSOR) >> 8) 205 206/* Get the offset from the opcode. */ 207#define getOffset(opcode) (opcode & MASK_OFFSET) 208 209/* Tests for specific data transfer load/store opcodes. */ 210#define TEST_OPCODE(opcode,mask) (((opcode) & (mask)) == (mask)) 211 212#define LOAD_OP(opcode) TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD) 213#define STORE_OP(opcode) ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT) 214 215#define LDF_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1)) 216#define LFM_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2)) 217#define STF_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1)) 218#define SFM_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2)) 219 220#define PREINDEXED(opcode) ((opcode & BIT_PREINDEX) != 0) 221#define POSTINDEXED(opcode) ((opcode & BIT_PREINDEX) == 0) 222#define BIT_UP_SET(opcode) ((opcode & BIT_UP) != 0) 223#define BIT_UP_CLEAR(opcode) ((opcode & BIT_DOWN) == 0) 224#define WRITE_BACK(opcode) ((opcode & BIT_WRITE_BACK) != 0) 225#define LOAD(opcode) ((opcode & BIT_LOAD) != 0) 226#define STORE(opcode) ((opcode & BIT_LOAD) == 0) 227 228/* 229=== 230=== Definitions for arithmetic instructions 231=== 232*/ 233/* bit masks */ 234#define BIT_MONADIC 0x00008000 235#define BIT_CONSTANT 0x00000008 236 237#define CONSTANT_FM(opcode) ((opcode & BIT_CONSTANT) != 0) 238#define MONADIC_INSTRUCTION(opcode) ((opcode & BIT_MONADIC) != 0) 239 240/* instruction identification masks */ 241#define MASK_CPDO 0x0e000000 /* arithmetic opcode */ 242#define MASK_ARITHMETIC_OPCODE 0x00f08000 243#define MASK_DESTINATION_SIZE 0x00080080 244 245/* dyadic arithmetic opcodes. */ 246#define ADF_CODE 0x00000000 247#define MUF_CODE 0x00100000 248#define SUF_CODE 0x00200000 249#define RSF_CODE 0x00300000 250#define DVF_CODE 0x00400000 251#define RDF_CODE 0x00500000 252#define POW_CODE 0x00600000 253#define RPW_CODE 0x00700000 254#define RMF_CODE 0x00800000 255#define FML_CODE 0x00900000 256#define FDV_CODE 0x00a00000 257#define FRD_CODE 0x00b00000 258#define POL_CODE 0x00c00000 259/* 0x00d00000 is an invalid dyadic arithmetic opcode */ 260/* 0x00e00000 is an invalid dyadic arithmetic opcode */ 261/* 0x00f00000 is an invalid dyadic arithmetic opcode */ 262 263/* monadic arithmetic opcodes. */ 264#define MVF_CODE 0x00008000 265#define MNF_CODE 0x00108000 266#define ABS_CODE 0x00208000 267#define RND_CODE 0x00308000 268#define SQT_CODE 0x00408000 269#define LOG_CODE 0x00508000 270#define LGN_CODE 0x00608000 271#define EXP_CODE 0x00708000 272#define SIN_CODE 0x00808000 273#define COS_CODE 0x00908000 274#define TAN_CODE 0x00a08000 275#define ASN_CODE 0x00b08000 276#define ACS_CODE 0x00c08000 277#define ATN_CODE 0x00d08000 278#define URD_CODE 0x00e08000 279#define NRM_CODE 0x00f08000 280 281/* 282=== 283=== Definitions for register transfer and comparison instructions 284=== 285*/ 286 287#define MASK_CPRT 0x0e000010 /* register transfer opcode */ 288#define MASK_CPRT_CODE 0x00f00000 289#define FLT_CODE 0x00000000 290#define FIX_CODE 0x00100000 291#define WFS_CODE 0x00200000 292#define RFS_CODE 0x00300000 293#define WFC_CODE 0x00400000 294#define RFC_CODE 0x00500000 295#define CMF_CODE 0x00900000 296#define CNF_CODE 0x00b00000 297#define CMFE_CODE 0x00d00000 298#define CNFE_CODE 0x00f00000 299 300/* 301=== 302=== Common definitions 303=== 304*/ 305 306/* register masks */ 307#define MASK_Rd 0x0000f000 308#define MASK_Rn 0x000f0000 309#define MASK_Fd 0x00007000 310#define MASK_Fm 0x00000007 311#define MASK_Fn 0x00070000 312 313/* condition code masks */ 314#define CC_MASK 0xf0000000 315#define CC_NEGATIVE 0x80000000 316#define CC_ZERO 0x40000000 317#define CC_CARRY 0x20000000 318#define CC_OVERFLOW 0x10000000 319#define CC_EQ 0x00000000 320#define CC_NE 0x10000000 321#define CC_CS 0x20000000 322#define CC_HS CC_CS 323#define CC_CC 0x30000000 324#define CC_LO CC_CC 325#define CC_MI 0x40000000 326#define CC_PL 0x50000000 327#define CC_VS 0x60000000 328#define CC_VC 0x70000000 329#define CC_HI 0x80000000 330#define CC_LS 0x90000000 331#define CC_GE 0xa0000000 332#define CC_LT 0xb0000000 333#define CC_GT 0xc0000000 334#define CC_LE 0xd0000000 335#define CC_AL 0xe0000000 336#define CC_NV 0xf0000000 337 338/* rounding masks/values */ 339#define MASK_ROUNDING_MODE 0x00000060 340#define ROUND_TO_NEAREST 0x00000000 341#define ROUND_TO_PLUS_INFINITY 0x00000020 342#define ROUND_TO_MINUS_INFINITY 0x00000040 343#define ROUND_TO_ZERO 0x00000060 344 345#define MASK_ROUNDING_PRECISION 0x00080080 346#define ROUND_SINGLE 0x00000000 347#define ROUND_DOUBLE 0x00000080 348#define ROUND_EXTENDED 0x00080000 349 350/* Get the condition code from the opcode. */ 351#define getCondition(opcode) (opcode >> 28) 352 353/* Get the source register from the opcode. */ 354#define getRn(opcode) ((opcode & MASK_Rn) >> 16) 355 356/* Get the destination floating point register from the opcode. */ 357#define getFd(opcode) ((opcode & MASK_Fd) >> 12) 358 359/* Get the first source floating point register from the opcode. */ 360#define getFn(opcode) ((opcode & MASK_Fn) >> 16) 361 362/* Get the second source floating point register from the opcode. */ 363#define getFm(opcode) (opcode & MASK_Fm) 364 365/* Get the destination register from the opcode. */ 366#define getRd(opcode) ((opcode & MASK_Rd) >> 12) 367 368/* Get the rounding mode from the opcode. */ 369#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5) 370 371#ifdef CONFIG_FPE_NWFPE_XP 372static inline floatx80 __pure getExtendedConstant(const unsigned int nIndex) 373{ 374 extern const floatx80 floatx80Constant[]; 375 return floatx80Constant[nIndex]; 376} 377#endif 378 379static inline float64 __pure getDoubleConstant(const unsigned int nIndex) 380{ 381 extern const float64 float64Constant[]; 382 return float64Constant[nIndex]; 383} 384 385static inline float32 __pure getSingleConstant(const unsigned int nIndex) 386{ 387 extern const float32 float32Constant[]; 388 return float32Constant[nIndex]; 389} 390 391static inline unsigned int getTransferLength(const unsigned int opcode) 392{ 393 unsigned int nRc; 394 395 switch (opcode & MASK_TRANSFER_LENGTH) { 396 case 0x00000000: 397 nRc = 1; 398 break; /* single precision */ 399 case 0x00008000: 400 nRc = 2; 401 break; /* double precision */ 402 case 0x00400000: 403 nRc = 3; 404 break; /* extended precision */ 405 default: 406 nRc = 0; 407 } 408 409 return (nRc); 410} 411 412static inline unsigned int getRegisterCount(const unsigned int opcode) 413{ 414 unsigned int nRc; 415 416 switch (opcode & MASK_REGISTER_COUNT) { 417 case 0x00000000: 418 nRc = 4; 419 break; 420 case 0x00008000: 421 nRc = 1; 422 break; 423 case 0x00400000: 424 nRc = 2; 425 break; 426 case 0x00408000: 427 nRc = 3; 428 break; 429 default: 430 nRc = 0; 431 } 432 433 return (nRc); 434} 435 436static inline unsigned int getRoundingPrecision(const unsigned int opcode) 437{ 438 unsigned int nRc; 439 440 switch (opcode & MASK_ROUNDING_PRECISION) { 441 case 0x00000000: 442 nRc = 1; 443 break; 444 case 0x00000080: 445 nRc = 2; 446 break; 447 case 0x00080000: 448 nRc = 3; 449 break; 450 default: 451 nRc = 0; 452 } 453 454 return (nRc); 455} 456 457static inline unsigned int getDestinationSize(const unsigned int opcode) 458{ 459 unsigned int nRc; 460 461 switch (opcode & MASK_DESTINATION_SIZE) { 462 case 0x00000000: 463 nRc = typeSingle; 464 break; 465 case 0x00000080: 466 nRc = typeDouble; 467 break; 468 case 0x00080000: 469 nRc = typeExtended; 470 break; 471 default: 472 nRc = typeNone; 473 } 474 475 return (nRc); 476} 477 478extern unsigned int checkCondition(const unsigned int opcode, 479 const unsigned int ccodes); 480 481extern const float64 float64Constant[]; 482extern const float32 float32Constant[]; 483 484#endif 485