1/* 2 * linux/arch/arm/mach-at91/board-picotux200.c 3 * 4 * Copyright (C) 2005 SAN People 5 * Copyright (C) 2007 Kleinhenz Elektronik GmbH 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 */ 21 22#include <linux/types.h> 23#include <linux/init.h> 24#include <linux/mm.h> 25#include <linux/module.h> 26#include <linux/platform_device.h> 27#include <linux/spi/spi.h> 28#include <linux/mtd/physmap.h> 29 30#include <mach/hardware.h> 31#include <asm/setup.h> 32#include <asm/mach-types.h> 33#include <asm/irq.h> 34 35#include <asm/mach/arch.h> 36#include <asm/mach/map.h> 37#include <asm/mach/irq.h> 38 39#include <mach/board.h> 40#include <mach/gpio.h> 41#include <mach/at91rm9200_mc.h> 42 43#include "generic.h" 44 45 46/* 47 * Serial port configuration. 48 * 0 .. 3 = USART0 .. USART3 49 * 4 = DBGU 50 */ 51static struct at91_uart_config __initdata picotux200_uart_config = { 52 .console_tty = 0, /* ttyS0 */ 53 .nr_tty = 2, 54 .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ 55}; 56 57static void __init picotux200_map_io(void) 58{ 59 /* Initialize processor: 18.432 MHz crystal */ 60 at91rm9200_initialize(18432000, AT91RM9200_BGA); 61 62 /* Setup the serial ports and console */ 63 at91_init_serial(&picotux200_uart_config); 64} 65 66static void __init picotux200_init_irq(void) 67{ 68 at91rm9200_init_interrupts(NULL); 69} 70 71static struct at91_eth_data __initdata picotux200_eth_data = { 72 .phy_irq_pin = AT91_PIN_PC4, 73 .is_rmii = 1, 74}; 75 76static struct at91_usbh_data __initdata picotux200_usbh_data = { 77 .ports = 1, 78}; 79 80// static struct at91_udc_data __initdata picotux200_udc_data = { 81// .vbus_pin = AT91_PIN_PD4, 82// .pullup_pin = AT91_PIN_PD5, 83// }; 84 85static struct at91_mmc_data __initdata picotux200_mmc_data = { 86 .det_pin = AT91_PIN_PB27, 87 .slot_b = 0, 88 .wire4 = 1, 89 .wp_pin = AT91_PIN_PA17, 90}; 91 92// static struct spi_board_info picotux200_spi_devices[] = { 93// { /* DataFlash chip */ 94// .modalias = "mtd_dataflash", 95// .chip_select = 0, 96// .max_speed_hz = 15 * 1000 * 1000, 97// }, 98// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD 99// { /* DataFlash card */ 100// .modalias = "mtd_dataflash", 101// .chip_select = 3, 102// .max_speed_hz = 15 * 1000 * 1000, 103// }, 104// #endif 105// }; 106 107#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 108#define PICOTUX200_FLASH_SIZE SZ_4M 109 110static struct physmap_flash_data picotux200_flash_data = { 111 .width = 2, 112}; 113 114static struct resource picotux200_flash_resource = { 115 .start = PICOTUX200_FLASH_BASE, 116 .end = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1, 117 .flags = IORESOURCE_MEM, 118}; 119 120static struct platform_device picotux200_flash = { 121 .name = "physmap-flash", 122 .id = 0, 123 .dev = { 124 .platform_data = &picotux200_flash_data, 125 }, 126 .resource = &picotux200_flash_resource, 127 .num_resources = 1, 128}; 129 130static void __init picotux200_board_init(void) 131{ 132 /* Serial */ 133 at91_add_device_serial(); 134 /* Ethernet */ 135 at91_add_device_eth(&picotux200_eth_data); 136 /* USB Host */ 137 at91_add_device_usbh(&picotux200_usbh_data); 138 /* USB Device */ 139 // at91_add_device_udc(&picotux200_udc_data); 140 // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ 141 /* I2C */ 142 at91_add_device_i2c(NULL, 0); 143 /* SPI */ 144 // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); 145#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD 146 /* DataFlash card */ 147 at91_set_gpio_output(AT91_PIN_PB22, 0); 148#else 149 /* MMC */ 150 at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ 151 at91_add_device_mmc(0, &picotux200_mmc_data); 152#endif 153 /* NOR Flash */ 154 platform_device_register(&picotux200_flash); 155} 156 157MACHINE_START(PICOTUX2XX, "picotux 200") 158 /* Maintainer: Kleinhenz Elektronik GmbH */ 159 .phys_io = AT91_BASE_SYS, 160 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, 161 .boot_params = AT91_SDRAM_BASE + 0x100, 162 .timer = &at91rm9200_timer, 163 .map_io = picotux200_map_io, 164 .init_irq = picotux200_init_irq, 165 .init_machine = picotux200_board_init, 166MACHINE_END 167