1What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid 2Date: July 2008 3KernelVersion: 2.6.27 4Contact: David Vrabel <david.vrabel@csr.com> 5Description: 6 Write the CHID (16 space-separated hex octets) for this host controller. 7 This starts the host controller, allowing it to accept connection from 8 WUSB devices. 9 10 Set an all zero CHID to stop the host controller. 11 12What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout 13Date: July 2008 14KernelVersion: 2.6.27 15Contact: David Vrabel <david.vrabel@csr.com> 16Description: 17 Devices that haven't sent a WUSB packet to the host 18 within 'wusb_trust_timeout' ms are considered to have 19 disconnected and are removed. The default value of 20 4000 ms is the value required by the WUSB 21 specification. 22 23 Since this relates to security (specifically, the 24 lifetime of PTKs and GTKs) it should not be changed 25 from the default. 26 27What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate 28Date: August 2009 29KernelVersion: 2.6.32 30Contact: David Vrabel <david.vrabel@csr.com> 31Description: 32 The maximum PHY rate to use for all connected devices. 33 This is only of limited use for testing and 34 development as the hardware's automatic rate 35 adaptation is better then this simple control. 36 37 Refer to [ECMA-368] section 10.3.1.1 for the value to 38 use. 39