1/* 2 * ALSA SoC WM9090 driver 3 * 4 * Copyright 2009, 2010 Wolfson Microelectronics 5 * 6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * version 2 as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but 13 * WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 20 * 02110-1301 USA 21 */ 22 23#include <linux/module.h> 24#include <linux/errno.h> 25#include <linux/device.h> 26#include <linux/i2c.h> 27#include <linux/delay.h> 28#include <linux/slab.h> 29#include <sound/initval.h> 30#include <sound/soc.h> 31#include <sound/soc-dapm.h> 32#include <sound/tlv.h> 33#include <sound/wm9090.h> 34 35#include "wm9090.h" 36 37static struct snd_soc_codec *wm9090_codec; 38 39static const u16 wm9090_reg_defaults[] = { 40 0x9093, /* R0 - Software Reset */ 41 0x0006, /* R1 - Power Management (1) */ 42 0x6000, /* R2 - Power Management (2) */ 43 0x0000, /* R3 - Power Management (3) */ 44 0x0000, /* R4 */ 45 0x0000, /* R5 */ 46 0x01C0, /* R6 - Clocking 1 */ 47 0x0000, /* R7 */ 48 0x0000, /* R8 */ 49 0x0000, /* R9 */ 50 0x0000, /* R10 */ 51 0x0000, /* R11 */ 52 0x0000, /* R12 */ 53 0x0000, /* R13 */ 54 0x0000, /* R14 */ 55 0x0000, /* R15 */ 56 0x0000, /* R16 */ 57 0x0000, /* R17 */ 58 0x0000, /* R18 */ 59 0x0000, /* R19 */ 60 0x0000, /* R20 */ 61 0x0000, /* R21 */ 62 0x0003, /* R22 - IN1 Line Control */ 63 0x0003, /* R23 - IN2 Line Control */ 64 0x0083, /* R24 - IN1 Line Input A Volume */ 65 0x0083, /* R25 - IN1 Line Input B Volume */ 66 0x0083, /* R26 - IN2 Line Input A Volume */ 67 0x0083, /* R27 - IN2 Line Input B Volume */ 68 0x002D, /* R28 - Left Output Volume */ 69 0x002D, /* R29 - Right Output Volume */ 70 0x0000, /* R30 */ 71 0x0000, /* R31 */ 72 0x0000, /* R32 */ 73 0x0000, /* R33 */ 74 0x0100, /* R34 - SPKMIXL Attenuation */ 75 0x0000, /* R35 */ 76 0x0010, /* R36 - SPKOUT Mixers */ 77 0x0140, /* R37 - ClassD3 */ 78 0x0039, /* R38 - Speaker Volume Left */ 79 0x0000, /* R39 */ 80 0x0000, /* R40 */ 81 0x0000, /* R41 */ 82 0x0000, /* R42 */ 83 0x0000, /* R43 */ 84 0x0000, /* R44 */ 85 0x0000, /* R45 - Output Mixer1 */ 86 0x0000, /* R46 - Output Mixer2 */ 87 0x0100, /* R47 - Output Mixer3 */ 88 0x0100, /* R48 - Output Mixer4 */ 89 0x0000, /* R49 */ 90 0x0000, /* R50 */ 91 0x0000, /* R51 */ 92 0x0000, /* R52 */ 93 0x0000, /* R53 */ 94 0x0000, /* R54 - Speaker Mixer */ 95 0x0000, /* R55 */ 96 0x0000, /* R56 */ 97 0x000D, /* R57 - AntiPOP2 */ 98 0x0000, /* R58 */ 99 0x0000, /* R59 */ 100 0x0000, /* R60 */ 101 0x0000, /* R61 */ 102 0x0000, /* R62 */ 103 0x0000, /* R63 */ 104 0x0000, /* R64 */ 105 0x0000, /* R65 */ 106 0x0000, /* R66 */ 107 0x0000, /* R67 */ 108 0x0000, /* R68 */ 109 0x0000, /* R69 */ 110 0x0000, /* R70 - Write Sequencer 0 */ 111 0x0000, /* R71 - Write Sequencer 1 */ 112 0x0000, /* R72 - Write Sequencer 2 */ 113 0x0000, /* R73 - Write Sequencer 3 */ 114 0x0000, /* R74 - Write Sequencer 4 */ 115 0x0000, /* R75 - Write Sequencer 5 */ 116 0x1F25, /* R76 - Charge Pump 1 */ 117 0x0000, /* R77 */ 118 0x0000, /* R78 */ 119 0x0000, /* R79 */ 120 0x0000, /* R80 */ 121 0x0000, /* R81 */ 122 0x0000, /* R82 */ 123 0x0000, /* R83 */ 124 0x0000, /* R84 - DC Servo 0 */ 125 0x054A, /* R85 - DC Servo 1 */ 126 0x0000, /* R86 */ 127 0x0000, /* R87 - DC Servo 3 */ 128 0x0000, /* R88 - DC Servo Readback 0 */ 129 0x0000, /* R89 - DC Servo Readback 1 */ 130 0x0000, /* R90 - DC Servo Readback 2 */ 131 0x0000, /* R91 */ 132 0x0000, /* R92 */ 133 0x0000, /* R93 */ 134 0x0000, /* R94 */ 135 0x0000, /* R95 */ 136 0x0100, /* R96 - Analogue HP 0 */ 137 0x0000, /* R97 */ 138 0x8640, /* R98 - AGC Control 0 */ 139 0xC000, /* R99 - AGC Control 1 */ 140 0x0200, /* R100 - AGC Control 2 */ 141}; 142 143/* This struct is used to save the context */ 144struct wm9090_priv { 145 /* We're not really registering as a CODEC since ASoC core 146 * does not yet support multiple CODECs but having the CODEC 147 * structure means we can reuse some of the ASoC core 148 * features. 149 */ 150 struct snd_soc_codec codec; 151 struct mutex mutex; 152 u16 reg_cache[WM9090_MAX_REGISTER + 1]; 153 struct wm9090_platform_data pdata; 154}; 155 156static int wm9090_volatile(unsigned int reg) 157{ 158 switch (reg) { 159 case WM9090_SOFTWARE_RESET: 160 case WM9090_DC_SERVO_0: 161 case WM9090_DC_SERVO_READBACK_0: 162 case WM9090_DC_SERVO_READBACK_1: 163 case WM9090_DC_SERVO_READBACK_2: 164 return 1; 165 166 default: 167 return 0; 168 } 169} 170 171static void wait_for_dc_servo(struct snd_soc_codec *codec) 172{ 173 unsigned int reg; 174 int count = 0; 175 176 dev_dbg(codec->dev, "Waiting for DC servo...\n"); 177 do { 178 count++; 179 msleep(1); 180 reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0); 181 dev_dbg(codec->dev, "DC servo status: %x\n", reg); 182 } while ((reg & WM9090_DCS_CAL_COMPLETE_MASK) 183 != WM9090_DCS_CAL_COMPLETE_MASK && count < 1000); 184 185 if ((reg & WM9090_DCS_CAL_COMPLETE_MASK) 186 != WM9090_DCS_CAL_COMPLETE_MASK) 187 dev_err(codec->dev, "Timed out waiting for DC Servo\n"); 188} 189 190static const unsigned int in_tlv[] = { 191 TLV_DB_RANGE_HEAD(6), 192 0, 0, TLV_DB_SCALE_ITEM(-600, 0, 0), 193 1, 3, TLV_DB_SCALE_ITEM(-350, 350, 0), 194 4, 6, TLV_DB_SCALE_ITEM(600, 600, 0), 195}; 196static const unsigned int mix_tlv[] = { 197 TLV_DB_RANGE_HEAD(4), 198 0, 2, TLV_DB_SCALE_ITEM(-1200, 300, 0), 199 3, 3, TLV_DB_SCALE_ITEM(0, 0, 0), 200}; 201static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); 202static const unsigned int spkboost_tlv[] = { 203 TLV_DB_RANGE_HEAD(7), 204 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0), 205 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0), 206}; 207 208static const struct snd_kcontrol_new wm9090_controls[] = { 209SOC_SINGLE_TLV("IN1A Volume", WM9090_IN1_LINE_INPUT_A_VOLUME, 0, 6, 0, 210 in_tlv), 211SOC_SINGLE("IN1A Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 7, 1, 1), 212SOC_SINGLE("IN1A ZC Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 6, 1, 0), 213 214SOC_SINGLE_TLV("IN2A Volume", WM9090_IN2_LINE_INPUT_A_VOLUME, 0, 6, 0, 215 in_tlv), 216SOC_SINGLE("IN2A Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 7, 1, 1), 217SOC_SINGLE("IN2A ZC Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 6, 1, 0), 218 219SOC_SINGLE("MIXOUTL Switch", WM9090_OUTPUT_MIXER3, 8, 1, 1), 220SOC_SINGLE_TLV("MIXOUTL IN1A Volume", WM9090_OUTPUT_MIXER3, 6, 3, 1, 221 mix_tlv), 222SOC_SINGLE_TLV("MIXOUTL IN2A Volume", WM9090_OUTPUT_MIXER3, 2, 3, 1, 223 mix_tlv), 224 225SOC_SINGLE("MIXOUTR Switch", WM9090_OUTPUT_MIXER4, 8, 1, 1), 226SOC_SINGLE_TLV("MIXOUTR IN1A Volume", WM9090_OUTPUT_MIXER4, 6, 3, 1, 227 mix_tlv), 228SOC_SINGLE_TLV("MIXOUTR IN2A Volume", WM9090_OUTPUT_MIXER4, 2, 3, 1, 229 mix_tlv), 230 231SOC_SINGLE("SPKMIX Switch", WM9090_SPKMIXL_ATTENUATION, 8, 1, 1), 232SOC_SINGLE_TLV("SPKMIX IN1A Volume", WM9090_SPKMIXL_ATTENUATION, 6, 3, 1, 233 mix_tlv), 234SOC_SINGLE_TLV("SPKMIX IN2A Volume", WM9090_SPKMIXL_ATTENUATION, 2, 3, 1, 235 mix_tlv), 236 237SOC_DOUBLE_R_TLV("Headphone Volume", WM9090_LEFT_OUTPUT_VOLUME, 238 WM9090_RIGHT_OUTPUT_VOLUME, 0, 63, 0, out_tlv), 239SOC_DOUBLE_R("Headphone Switch", WM9090_LEFT_OUTPUT_VOLUME, 240 WM9090_RIGHT_OUTPUT_VOLUME, 6, 1, 1), 241SOC_DOUBLE_R("Headphone ZC Switch", WM9090_LEFT_OUTPUT_VOLUME, 242 WM9090_RIGHT_OUTPUT_VOLUME, 7, 1, 0), 243 244SOC_SINGLE_TLV("Speaker Volume", WM9090_SPEAKER_VOLUME_LEFT, 0, 63, 0, 245 out_tlv), 246SOC_SINGLE("Speaker Switch", WM9090_SPEAKER_VOLUME_LEFT, 6, 1, 1), 247SOC_SINGLE("Speaker ZC Switch", WM9090_SPEAKER_VOLUME_LEFT, 7, 1, 0), 248SOC_SINGLE_TLV("Speaker Boost Volume", WM9090_CLASSD3, 3, 7, 0, spkboost_tlv), 249}; 250 251static const struct snd_kcontrol_new wm9090_in1_se_controls[] = { 252SOC_SINGLE_TLV("IN1B Volume", WM9090_IN1_LINE_INPUT_B_VOLUME, 0, 6, 0, 253 in_tlv), 254SOC_SINGLE("IN1B Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 7, 1, 1), 255SOC_SINGLE("IN1B ZC Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 6, 1, 0), 256 257SOC_SINGLE_TLV("SPKMIX IN1B Volume", WM9090_SPKMIXL_ATTENUATION, 4, 3, 1, 258 mix_tlv), 259SOC_SINGLE_TLV("MIXOUTL IN1B Volume", WM9090_OUTPUT_MIXER3, 4, 3, 1, 260 mix_tlv), 261SOC_SINGLE_TLV("MIXOUTR IN1B Volume", WM9090_OUTPUT_MIXER4, 4, 3, 1, 262 mix_tlv), 263}; 264 265static const struct snd_kcontrol_new wm9090_in2_se_controls[] = { 266SOC_SINGLE_TLV("IN2B Volume", WM9090_IN2_LINE_INPUT_B_VOLUME, 0, 6, 0, 267 in_tlv), 268SOC_SINGLE("IN2B Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 7, 1, 1), 269SOC_SINGLE("IN2B ZC Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 6, 1, 0), 270 271SOC_SINGLE_TLV("SPKMIX IN2B Volume", WM9090_SPKMIXL_ATTENUATION, 0, 3, 1, 272 mix_tlv), 273SOC_SINGLE_TLV("MIXOUTL IN2B Volume", WM9090_OUTPUT_MIXER3, 0, 3, 1, 274 mix_tlv), 275SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1, 276 mix_tlv), 277}; 278 279static int hp_ev(struct snd_soc_dapm_widget *w, 280 struct snd_kcontrol *kcontrol, int event) 281{ 282 struct snd_soc_codec *codec = w->codec; 283 unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0); 284 285 switch (event) { 286 case SND_SOC_DAPM_POST_PMU: 287 snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, 288 WM9090_CP_ENA, WM9090_CP_ENA); 289 290 msleep(5); 291 292 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, 293 WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, 294 WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA); 295 296 reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY; 297 snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); 298 299 /* Start the DC servo. We don't currently use the 300 * ability to save the state since we don't have full 301 * control of the analogue paths and they can change 302 * DC offsets; see the WM8904 driver for an example of 303 * doing so. 304 */ 305 snd_soc_write(codec, WM9090_DC_SERVO_0, 306 WM9090_DCS_ENA_CHAN_0 | 307 WM9090_DCS_ENA_CHAN_1 | 308 WM9090_DCS_TRIG_STARTUP_1 | 309 WM9090_DCS_TRIG_STARTUP_0); 310 wait_for_dc_servo(codec); 311 312 reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT | 313 WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT; 314 snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); 315 break; 316 317 case SND_SOC_DAPM_PRE_PMD: 318 reg &= ~(WM9090_HPOUT1L_RMV_SHORT | 319 WM9090_HPOUT1L_DLY | 320 WM9090_HPOUT1L_OUTP | 321 WM9090_HPOUT1R_RMV_SHORT | 322 WM9090_HPOUT1R_DLY | 323 WM9090_HPOUT1R_OUTP); 324 325 snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); 326 327 snd_soc_write(codec, WM9090_DC_SERVO_0, 0); 328 329 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, 330 WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, 331 0); 332 333 snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, 334 WM9090_CP_ENA, 0); 335 break; 336 } 337 338 return 0; 339} 340 341static const struct snd_kcontrol_new spkmix[] = { 342SOC_DAPM_SINGLE("IN1A Switch", WM9090_SPEAKER_MIXER, 6, 1, 0), 343SOC_DAPM_SINGLE("IN1B Switch", WM9090_SPEAKER_MIXER, 4, 1, 0), 344SOC_DAPM_SINGLE("IN2A Switch", WM9090_SPEAKER_MIXER, 2, 1, 0), 345SOC_DAPM_SINGLE("IN2B Switch", WM9090_SPEAKER_MIXER, 0, 1, 0), 346}; 347 348static const struct snd_kcontrol_new spkout[] = { 349SOC_DAPM_SINGLE("Mixer Switch", WM9090_SPKOUT_MIXERS, 4, 1, 0), 350}; 351 352static const struct snd_kcontrol_new mixoutl[] = { 353SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER1, 6, 1, 0), 354SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER1, 4, 1, 0), 355SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER1, 2, 1, 0), 356SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER1, 0, 1, 0), 357}; 358 359static const struct snd_kcontrol_new mixoutr[] = { 360SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER2, 6, 1, 0), 361SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER2, 4, 1, 0), 362SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER2, 2, 1, 0), 363SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER2, 0, 1, 0), 364}; 365 366static const struct snd_soc_dapm_widget wm9090_dapm_widgets[] = { 367SND_SOC_DAPM_INPUT("IN1+"), 368SND_SOC_DAPM_INPUT("IN1-"), 369SND_SOC_DAPM_INPUT("IN2+"), 370SND_SOC_DAPM_INPUT("IN2-"), 371 372SND_SOC_DAPM_SUPPLY("OSC", WM9090_POWER_MANAGEMENT_1, 3, 0, NULL, 0), 373 374SND_SOC_DAPM_PGA("IN1A PGA", WM9090_POWER_MANAGEMENT_2, 7, 0, NULL, 0), 375SND_SOC_DAPM_PGA("IN1B PGA", WM9090_POWER_MANAGEMENT_2, 6, 0, NULL, 0), 376SND_SOC_DAPM_PGA("IN2A PGA", WM9090_POWER_MANAGEMENT_2, 5, 0, NULL, 0), 377SND_SOC_DAPM_PGA("IN2B PGA", WM9090_POWER_MANAGEMENT_2, 4, 0, NULL, 0), 378 379SND_SOC_DAPM_MIXER("SPKMIX", WM9090_POWER_MANAGEMENT_3, 3, 0, 380 spkmix, ARRAY_SIZE(spkmix)), 381SND_SOC_DAPM_MIXER("MIXOUTL", WM9090_POWER_MANAGEMENT_3, 5, 0, 382 mixoutl, ARRAY_SIZE(mixoutl)), 383SND_SOC_DAPM_MIXER("MIXOUTR", WM9090_POWER_MANAGEMENT_3, 4, 0, 384 mixoutr, ARRAY_SIZE(mixoutr)), 385 386SND_SOC_DAPM_PGA_E("HP PGA", SND_SOC_NOPM, 0, 0, NULL, 0, 387 hp_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 388 389SND_SOC_DAPM_PGA("SPKPGA", WM9090_POWER_MANAGEMENT_3, 8, 0, NULL, 0), 390SND_SOC_DAPM_MIXER("SPKOUT", WM9090_POWER_MANAGEMENT_1, 12, 0, 391 spkout, ARRAY_SIZE(spkout)), 392 393SND_SOC_DAPM_OUTPUT("HPR"), 394SND_SOC_DAPM_OUTPUT("HPL"), 395SND_SOC_DAPM_OUTPUT("Speaker"), 396}; 397 398static const struct snd_soc_dapm_route audio_map[] = { 399 { "IN1A PGA", NULL, "IN1+" }, 400 { "IN2A PGA", NULL, "IN2+" }, 401 402 { "SPKMIX", "IN1A Switch", "IN1A PGA" }, 403 { "SPKMIX", "IN2A Switch", "IN2A PGA" }, 404 405 { "MIXOUTL", "IN1A Switch", "IN1A PGA" }, 406 { "MIXOUTL", "IN2A Switch", "IN2A PGA" }, 407 408 { "MIXOUTR", "IN1A Switch", "IN1A PGA" }, 409 { "MIXOUTR", "IN2A Switch", "IN2A PGA" }, 410 411 { "HP PGA", NULL, "OSC" }, 412 { "HP PGA", NULL, "MIXOUTL" }, 413 { "HP PGA", NULL, "MIXOUTR" }, 414 415 { "HPL", NULL, "HP PGA" }, 416 { "HPR", NULL, "HP PGA" }, 417 418 { "SPKPGA", NULL, "OSC" }, 419 { "SPKPGA", NULL, "SPKMIX" }, 420 421 { "SPKOUT", "Mixer Switch", "SPKPGA" }, 422 423 { "Speaker", NULL, "SPKOUT" }, 424}; 425 426static const struct snd_soc_dapm_route audio_map_in1_se[] = { 427 { "IN1B PGA", NULL, "IN1-" }, 428 429 { "SPKMIX", "IN1B Switch", "IN1B PGA" }, 430 { "MIXOUTL", "IN1B Switch", "IN1B PGA" }, 431 { "MIXOUTR", "IN1B Switch", "IN1B PGA" }, 432}; 433 434static const struct snd_soc_dapm_route audio_map_in1_diff[] = { 435 { "IN1A PGA", NULL, "IN1-" }, 436}; 437 438static const struct snd_soc_dapm_route audio_map_in2_se[] = { 439 { "IN2B PGA", NULL, "IN2-" }, 440 441 { "SPKMIX", "IN2B Switch", "IN2B PGA" }, 442 { "MIXOUTL", "IN2B Switch", "IN2B PGA" }, 443 { "MIXOUTR", "IN2B Switch", "IN2B PGA" }, 444}; 445 446static const struct snd_soc_dapm_route audio_map_in2_diff[] = { 447 { "IN2A PGA", NULL, "IN2-" }, 448}; 449 450static int wm9090_add_controls(struct snd_soc_codec *codec) 451{ 452 struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); 453 int i; 454 455 snd_soc_dapm_new_controls(codec, wm9090_dapm_widgets, 456 ARRAY_SIZE(wm9090_dapm_widgets)); 457 458 snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); 459 460 snd_soc_add_controls(codec, wm9090_controls, 461 ARRAY_SIZE(wm9090_controls)); 462 463 if (wm9090->pdata.lin1_diff) { 464 snd_soc_dapm_add_routes(codec, audio_map_in1_diff, 465 ARRAY_SIZE(audio_map_in1_diff)); 466 } else { 467 snd_soc_dapm_add_routes(codec, audio_map_in1_se, 468 ARRAY_SIZE(audio_map_in1_se)); 469 snd_soc_add_controls(codec, wm9090_in1_se_controls, 470 ARRAY_SIZE(wm9090_in1_se_controls)); 471 } 472 473 if (wm9090->pdata.lin2_diff) { 474 snd_soc_dapm_add_routes(codec, audio_map_in2_diff, 475 ARRAY_SIZE(audio_map_in2_diff)); 476 } else { 477 snd_soc_dapm_add_routes(codec, audio_map_in2_se, 478 ARRAY_SIZE(audio_map_in2_se)); 479 snd_soc_add_controls(codec, wm9090_in2_se_controls, 480 ARRAY_SIZE(wm9090_in2_se_controls)); 481 } 482 483 if (wm9090->pdata.agc_ena) { 484 for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++) 485 snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i, 486 wm9090->pdata.agc[i]); 487 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, 488 WM9090_AGC_ENA, WM9090_AGC_ENA); 489 } else { 490 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, 491 WM9090_AGC_ENA, 0); 492 } 493 494 return 0; 495 496} 497 498/* 499 * The machine driver should call this from their set_bias_level; if there 500 * isn't one then this can just be set as the set_bias_level function. 501 */ 502static int wm9090_set_bias_level(struct snd_soc_codec *codec, 503 enum snd_soc_bias_level level) 504{ 505 u16 *reg_cache = codec->reg_cache; 506 int i, ret; 507 508 switch (level) { 509 case SND_SOC_BIAS_ON: 510 break; 511 512 case SND_SOC_BIAS_PREPARE: 513 snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA, 514 WM9090_VMID_ENA); 515 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, 516 WM9090_BIAS_ENA | 517 WM9090_VMID_RES_MASK, 518 WM9090_BIAS_ENA | 519 1 << WM9090_VMID_RES_SHIFT); 520 msleep(1); /* Probably an overestimate */ 521 break; 522 523 case SND_SOC_BIAS_STANDBY: 524 if (codec->bias_level == SND_SOC_BIAS_OFF) { 525 /* Restore the register cache */ 526 for (i = 1; i < codec->reg_cache_size; i++) { 527 if (reg_cache[i] == wm9090_reg_defaults[i]) 528 continue; 529 if (wm9090_volatile(i)) 530 continue; 531 532 ret = snd_soc_write(codec, i, reg_cache[i]); 533 if (ret != 0) 534 dev_warn(codec->dev, 535 "Failed to restore register %d: %d\n", 536 i, ret); 537 } 538 } 539 540 /* We keep VMID off during standby since the combination of 541 * ground referenced outputs and class D speaker mean that 542 * latency is not an issue. 543 */ 544 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, 545 WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0); 546 snd_soc_update_bits(codec, WM9090_ANTIPOP2, 547 WM9090_VMID_ENA, 0); 548 break; 549 550 case SND_SOC_BIAS_OFF: 551 break; 552 } 553 554 codec->bias_level = level; 555 556 return 0; 557} 558 559static int wm9090_probe(struct platform_device *pdev) 560{ 561 struct snd_soc_device *socdev = platform_get_drvdata(pdev); 562 struct snd_soc_codec *codec; 563 int ret = 0; 564 565 if (wm9090_codec == NULL) { 566 dev_err(&pdev->dev, "Codec device not registered\n"); 567 return -ENODEV; 568 } 569 570 socdev->card->codec = wm9090_codec; 571 codec = wm9090_codec; 572 573 /* register pcms */ 574 ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); 575 if (ret < 0) { 576 dev_err(codec->dev, "failed to create pcms: %d\n", ret); 577 goto pcm_err; 578 } 579 580 wm9090_add_controls(codec); 581 582 return 0; 583 584pcm_err: 585 return ret; 586} 587 588#ifdef CONFIG_PM 589static int wm9090_suspend(struct platform_device *pdev, pm_message_t state) 590{ 591 struct snd_soc_device *socdev = platform_get_drvdata(pdev); 592 struct snd_soc_codec *codec = socdev->card->codec; 593 594 wm9090_set_bias_level(codec, SND_SOC_BIAS_OFF); 595 596 return 0; 597} 598 599static int wm9090_resume(struct platform_device *pdev) 600{ 601 struct snd_soc_device *socdev = platform_get_drvdata(pdev); 602 struct snd_soc_codec *codec = socdev->card->codec; 603 604 wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY); 605 606 return 0; 607} 608#else 609#define wm9090_suspend NULL 610#define wm9090_resume NULL 611#endif 612 613static int wm9090_remove(struct platform_device *pdev) 614{ 615 struct snd_soc_device *socdev = platform_get_drvdata(pdev); 616 617 snd_soc_free_pcms(socdev); 618 snd_soc_dapm_free(socdev); 619 620 return 0; 621} 622 623struct snd_soc_codec_device soc_codec_dev_wm9090 = { 624 .probe = wm9090_probe, 625 .remove = wm9090_remove, 626 .suspend = wm9090_suspend, 627 .resume = wm9090_resume, 628}; 629EXPORT_SYMBOL_GPL(soc_codec_dev_wm9090); 630 631static int wm9090_i2c_probe(struct i2c_client *i2c, 632 const struct i2c_device_id *id) 633{ 634 struct wm9090_priv *wm9090; 635 struct snd_soc_codec *codec; 636 int ret; 637 638 wm9090 = kzalloc(sizeof(*wm9090), GFP_KERNEL); 639 if (wm9090 == NULL) { 640 dev_err(&i2c->dev, "Can not allocate memory\n"); 641 return -ENOMEM; 642 } 643 codec = &wm9090->codec; 644 645 if (i2c->dev.platform_data) 646 memcpy(&wm9090->pdata, i2c->dev.platform_data, 647 sizeof(wm9090->pdata)); 648 649 wm9090_codec = codec; 650 651 i2c_set_clientdata(i2c, wm9090); 652 653 mutex_init(&codec->mutex); 654 INIT_LIST_HEAD(&codec->dapm_widgets); 655 INIT_LIST_HEAD(&codec->dapm_paths); 656 657 codec->control_data = i2c; 658 snd_soc_codec_set_drvdata(codec, wm9090); 659 codec->dev = &i2c->dev; 660 codec->name = "WM9090"; 661 codec->owner = THIS_MODULE; 662 codec->bias_level = SND_SOC_BIAS_OFF; 663 codec->set_bias_level = wm9090_set_bias_level, 664 codec->reg_cache_size = WM9090_MAX_REGISTER + 1; 665 codec->reg_cache = &wm9090->reg_cache; 666 codec->volatile_register = wm9090_volatile; 667 668 ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C); 669 if (ret != 0) { 670 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); 671 goto err; 672 } 673 674 memcpy(&wm9090->reg_cache, wm9090_reg_defaults, 675 sizeof(wm9090->reg_cache)); 676 677 ret = snd_soc_read(codec, WM9090_SOFTWARE_RESET); 678 if (ret < 0) 679 goto err; 680 if (ret != wm9090_reg_defaults[WM9090_SOFTWARE_RESET]) { 681 dev_err(&i2c->dev, "Device is not a WM9090, ID=%x\n", ret); 682 ret = -EINVAL; 683 goto err; 684 } 685 686 ret = snd_soc_write(codec, WM9090_SOFTWARE_RESET, 0); 687 if (ret < 0) 688 goto err; 689 690 /* Configure some defaults; they will be written out when we 691 * bring the bias up. 692 */ 693 wm9090->reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU 694 | WM9090_IN1A_ZC; 695 wm9090->reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU 696 | WM9090_IN1B_ZC; 697 wm9090->reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU 698 | WM9090_IN2A_ZC; 699 wm9090->reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU 700 | WM9090_IN2B_ZC; 701 wm9090->reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |= 702 WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC; 703 wm9090->reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |= 704 WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC; 705 wm9090->reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |= 706 WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC; 707 708 wm9090->reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA; 709 710 wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY); 711 712 ret = snd_soc_register_codec(codec); 713 if (ret != 0) { 714 dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); 715 goto err_bias; 716 } 717 718 return 0; 719 720err_bias: 721 wm9090_set_bias_level(codec, SND_SOC_BIAS_OFF); 722err: 723 kfree(wm9090); 724 i2c_set_clientdata(i2c, NULL); 725 wm9090_codec = NULL; 726 727 return ret; 728} 729 730static int wm9090_i2c_remove(struct i2c_client *i2c) 731{ 732 struct wm9090_priv *wm9090 = i2c_get_clientdata(i2c); 733 struct snd_soc_codec *codec = &wm9090->codec; 734 735 snd_soc_unregister_codec(codec); 736 wm9090_set_bias_level(codec, SND_SOC_BIAS_OFF); 737 kfree(wm9090); 738 wm9090_codec = NULL; 739 740 return 0; 741} 742 743static const struct i2c_device_id wm9090_id[] = { 744 { "wm9090", 0 }, 745 { } 746}; 747MODULE_DEVICE_TABLE(i2c, wm9090_id); 748 749static struct i2c_driver wm9090_i2c_driver = { 750 .driver = { 751 .name = "wm9090", 752 .owner = THIS_MODULE, 753 }, 754 .probe = wm9090_i2c_probe, 755 .remove = __devexit_p(wm9090_i2c_remove), 756 .id_table = wm9090_id, 757}; 758 759static int __init wm9090_init(void) 760{ 761 return i2c_add_driver(&wm9090_i2c_driver); 762} 763module_init(wm9090_init); 764 765static void __exit wm9090_exit(void) 766{ 767 i2c_del_driver(&wm9090_i2c_driver); 768} 769module_exit(wm9090_exit); 770 771MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 772MODULE_DESCRIPTION("WM9090 ASoC driver"); 773MODULE_LICENSE("GPL"); 774