1/* 2 * Bitbanging I2C bus driver using the GPIO API 3 * 4 * Copyright (C) 2007 Atmel Corporation 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10#include <linux/i2c.h> 11#include <linux/i2c-algo-bit.h> 12#include <linux/i2c-gpio.h> 13#include <linux/init.h> 14#include <linux/module.h> 15#include <linux/slab.h> 16#include <linux/platform_device.h> 17 18#include <asm/gpio.h> 19 20/* Toggle SDA by changing the direction of the pin */ 21static void i2c_gpio_setsda_dir(void *data, int state) 22{ 23 struct i2c_gpio_platform_data *pdata = data; 24 25 if (state) 26 gpio_direction_input(pdata->sda_pin); 27 else 28 gpio_direction_output(pdata->sda_pin, 0); 29} 30 31/* 32 * Toggle SDA by changing the output value of the pin. This is only 33 * valid for pins configured as open drain (i.e. setting the value 34 * high effectively turns off the output driver.) 35 */ 36static void i2c_gpio_setsda_val(void *data, int state) 37{ 38 struct i2c_gpio_platform_data *pdata = data; 39 40 gpio_set_value(pdata->sda_pin, state); 41} 42 43/* Toggle SCL by changing the direction of the pin. */ 44static void i2c_gpio_setscl_dir(void *data, int state) 45{ 46 struct i2c_gpio_platform_data *pdata = data; 47 48 if (state) 49 gpio_direction_input(pdata->scl_pin); 50 else 51 gpio_direction_output(pdata->scl_pin, 0); 52} 53 54/* 55 * Toggle SCL by changing the output value of the pin. This is used 56 * for pins that are configured as open drain and for output-only 57 * pins. The latter case will break the i2c protocol, but it will 58 * often work in practice. 59 */ 60static void i2c_gpio_setscl_val(void *data, int state) 61{ 62 struct i2c_gpio_platform_data *pdata = data; 63 64 gpio_set_value(pdata->scl_pin, state); 65} 66 67static int i2c_gpio_getsda(void *data) 68{ 69 struct i2c_gpio_platform_data *pdata = data; 70 71 return gpio_get_value(pdata->sda_pin); 72} 73 74static int i2c_gpio_getscl(void *data) 75{ 76 struct i2c_gpio_platform_data *pdata = data; 77 78 return gpio_get_value(pdata->scl_pin); 79} 80 81static int __devinit i2c_gpio_probe(struct platform_device *pdev) 82{ 83 struct i2c_gpio_platform_data *pdata; 84 struct i2c_algo_bit_data *bit_data; 85 struct i2c_adapter *adap; 86 int ret; 87 88 pdata = pdev->dev.platform_data; 89 if (!pdata) 90 return -ENXIO; 91 92 ret = -ENOMEM; 93 adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); 94 if (!adap) 95 goto err_alloc_adap; 96 bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL); 97 if (!bit_data) 98 goto err_alloc_bit_data; 99 100 ret = gpio_request(pdata->sda_pin, "sda"); 101 if (ret) 102 goto err_request_sda; 103 ret = gpio_request(pdata->scl_pin, "scl"); 104 if (ret) 105 goto err_request_scl; 106 107 if (pdata->sda_is_open_drain) { 108 gpio_direction_output(pdata->sda_pin, 1); 109 bit_data->setsda = i2c_gpio_setsda_val; 110 } else { 111 gpio_direction_input(pdata->sda_pin); 112 bit_data->setsda = i2c_gpio_setsda_dir; 113 } 114 115 if (pdata->scl_is_open_drain || pdata->scl_is_output_only) { 116 gpio_direction_output(pdata->scl_pin, 1); 117 bit_data->setscl = i2c_gpio_setscl_val; 118 } else { 119 gpio_direction_input(pdata->scl_pin); 120 bit_data->setscl = i2c_gpio_setscl_dir; 121 } 122 123 if (!pdata->scl_is_output_only) 124 bit_data->getscl = i2c_gpio_getscl; 125 bit_data->getsda = i2c_gpio_getsda; 126 127 if (pdata->udelay) 128 bit_data->udelay = pdata->udelay; 129 else if (pdata->scl_is_output_only) 130 bit_data->udelay = 50; /* 10 kHz */ 131 else 132 bit_data->udelay = 5; /* 100 kHz */ 133 134 if (pdata->timeout) 135 bit_data->timeout = pdata->timeout; 136 else 137 bit_data->timeout = HZ / 10; /* 100 ms */ 138 139 bit_data->data = pdata; 140 141 adap->owner = THIS_MODULE; 142 snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); 143 adap->algo_data = bit_data; 144 adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 145 adap->dev.parent = &pdev->dev; 146 147 /* 148 * If "dev->id" is negative we consider it as zero. 149 * The reason to do so is to avoid sysfs names that only make 150 * sense when there are multiple adapters. 151 */ 152 adap->nr = (pdev->id != -1) ? pdev->id : 0; 153 ret = i2c_bit_add_numbered_bus(adap); 154 if (ret) 155 goto err_add_bus; 156 157 platform_set_drvdata(pdev, adap); 158 159 dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", 160 pdata->sda_pin, pdata->scl_pin, 161 pdata->scl_is_output_only 162 ? ", no clock stretching" : ""); 163 164 return 0; 165 166err_add_bus: 167 gpio_free(pdata->scl_pin); 168err_request_scl: 169 gpio_free(pdata->sda_pin); 170err_request_sda: 171 kfree(bit_data); 172err_alloc_bit_data: 173 kfree(adap); 174err_alloc_adap: 175 return ret; 176} 177 178static int __devexit i2c_gpio_remove(struct platform_device *pdev) 179{ 180 struct i2c_gpio_platform_data *pdata; 181 struct i2c_adapter *adap; 182 183 adap = platform_get_drvdata(pdev); 184 pdata = pdev->dev.platform_data; 185 186 i2c_del_adapter(adap); 187 gpio_free(pdata->scl_pin); 188 gpio_free(pdata->sda_pin); 189 kfree(adap->algo_data); 190 kfree(adap); 191 192 return 0; 193} 194 195static struct platform_driver i2c_gpio_driver = { 196 .driver = { 197 .name = "i2c-gpio", 198 .owner = THIS_MODULE, 199 }, 200 .probe = i2c_gpio_probe, 201 .remove = __devexit_p(i2c_gpio_remove), 202}; 203 204static int __init i2c_gpio_init(void) 205{ 206 int ret; 207 208 ret = platform_driver_register(&i2c_gpio_driver); 209 if (ret) 210 printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret); 211 212 return ret; 213} 214subsys_initcall(i2c_gpio_init); 215 216static void __exit i2c_gpio_exit(void) 217{ 218 platform_driver_unregister(&i2c_gpio_driver); 219} 220module_exit(i2c_gpio_exit); 221 222MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); 223MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver"); 224MODULE_LICENSE("GPL"); 225MODULE_ALIAS("platform:i2c-gpio"); 226