1/* 2 * Copyright 2007-2008 Analog Devices Inc. 3 * 4 * Licensed under the ADI BSD license or the GPL-2 (or later) 5 */ 6 7#ifndef _DEF_BF52X_H 8#define _DEF_BF52X_H 9 10 11/* ************************************************************** */ 12/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */ 13/* ************************************************************** */ 14 15/* ==== begin from defBF534.h ==== */ 16 17/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ 18#define PLL_CTL 0xFFC00000 /* PLL Control Register */ 19#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ 20#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ 21#define PLL_STAT 0xFFC0000C /* PLL Status Register */ 22#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ 23#define CHIPID 0xFFC00014 /* Device ID Register */ 24 25 26/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ 27#define SWRST 0xFFC00100 /* Software Reset Register */ 28#define SYSCR 0xFFC00104 /* System Configuration Register */ 29#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ 30 31#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ 32#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ 33#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ 34#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ 35#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ 36#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ 37#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ 38 39/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ 40#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ 41#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ 42#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ 43#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ 44#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ 45#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */ 46#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ 47 48 49/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ 50#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ 51#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ 52#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ 53 54 55/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ 56#define RTC_STAT 0xFFC00300 /* RTC Status Register */ 57#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ 58#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ 59#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ 60#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ 61#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ 62#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ 63 64 65/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ 66#define UART0_THR 0xFFC00400 /* Transmit Holding register */ 67#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ 68#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ 69#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ 70#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ 71#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ 72#define UART0_LCR 0xFFC0040C /* Line Control Register */ 73#define UART0_MCR 0xFFC00410 /* Modem Control Register */ 74#define UART0_LSR 0xFFC00414 /* Line Status Register */ 75#define UART0_MSR 0xFFC00418 /* Modem Status Register */ 76#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ 77#define UART0_GCTL 0xFFC00424 /* Global Control Register */ 78 79 80/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ 81#define SPI0_REGBASE 0xFFC00500 82#define SPI_CTL 0xFFC00500 /* SPI Control Register */ 83#define SPI_FLG 0xFFC00504 /* SPI Flag register */ 84#define SPI_STAT 0xFFC00508 /* SPI Status register */ 85#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ 86#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ 87#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ 88#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ 89 90 91/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ 92#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ 93#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ 94#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ 95#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ 96 97#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ 98#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ 99#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ 100#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ 101 102#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ 103#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ 104#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ 105#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ 106 107#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ 108#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ 109#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ 110#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ 111 112#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ 113#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ 114#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ 115#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ 116 117#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ 118#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ 119#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ 120#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ 121 122#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ 123#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ 124#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ 125#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ 126 127#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ 128#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ 129#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ 130#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ 131 132#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ 133#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ 134#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ 135 136 137/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ 138#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ 139#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ 140#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ 141#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ 142#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ 143#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ 144#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ 145#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ 146#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ 147#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ 148#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ 149#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ 150#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ 151#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ 152#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ 153#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ 154#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ 155 156 157/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ 158#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ 159#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ 160#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ 161#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ 162#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ 163#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ 164#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ 165#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ 166#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ 167#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ 168#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ 169#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ 170#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ 171#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ 172#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ 173#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ 174#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ 175#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ 176#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ 177#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ 178#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ 179#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ 180 181 182/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ 183#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ 184#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ 185#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ 186#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ 187#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ 188#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ 189#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ 190#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ 191#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ 192#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ 193#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ 194#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ 195#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ 196#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ 197#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ 198#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ 199#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ 200#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ 201#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ 202#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ 203#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ 204#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ 205 206 207/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ 208#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ 209#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ 210#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ 211#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ 212#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ 213#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ 214#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ 215 216 217/* DMA Traffic Control Registers */ 218#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ 219#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ 220 221/* Alternate deprecated register names (below) provided for backwards code compatibility */ 222#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ 223#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ 224 225/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ 226#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ 227#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ 228#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ 229#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ 230#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ 231#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ 232#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ 233#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ 234#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ 235#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ 236#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ 237#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ 238#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ 239 240#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ 241#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ 242#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ 243#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ 244#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ 245#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ 246#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ 247#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ 248#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ 249#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ 250#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ 251#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ 252#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ 253 254#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ 255#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ 256#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ 257#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ 258#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ 259#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ 260#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ 261#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ 262#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ 263#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ 264#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ 265#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ 266#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ 267 268#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ 269#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ 270#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ 271#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ 272#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ 273#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ 274#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ 275#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ 276#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ 277#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ 278#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ 279#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ 280#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ 281 282#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ 283#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ 284#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ 285#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ 286#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ 287#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ 288#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ 289#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ 290#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ 291#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ 292#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ 293#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ 294#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ 295 296#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ 297#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ 298#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ 299#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ 300#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ 301#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ 302#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ 303#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ 304#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ 305#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ 306#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ 307#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ 308#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ 309 310#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ 311#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ 312#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ 313#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ 314#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ 315#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ 316#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ 317#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ 318#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ 319#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ 320#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ 321#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ 322#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ 323 324#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ 325#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ 326#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ 327#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ 328#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ 329#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ 330#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ 331#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ 332#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ 333#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ 334#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ 335#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ 336#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ 337 338#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ 339#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ 340#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ 341#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ 342#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ 343#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ 344#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ 345#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ 346#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ 347#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ 348#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ 349#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ 350#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ 351 352#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ 353#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ 354#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ 355#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ 356#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ 357#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ 358#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ 359#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ 360#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ 361#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ 362#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ 363#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ 364#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ 365 366#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ 367#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ 368#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ 369#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ 370#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ 371#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ 372#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ 373#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ 374#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ 375#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ 376#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ 377#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ 378#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ 379 380#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ 381#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ 382#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ 383#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ 384#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ 385#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ 386#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ 387#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ 388#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ 389#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ 390#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ 391#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ 392#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ 393 394#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ 395#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ 396#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ 397#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ 398#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ 399#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ 400#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ 401#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ 402#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ 403#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ 404#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ 405#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ 406#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ 407 408#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ 409#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ 410#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ 411#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ 412#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ 413#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ 414#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ 415#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ 416#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ 417#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ 418#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ 419#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ 420#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ 421 422#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ 423#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ 424#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ 425#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ 426#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ 427#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ 428#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ 429#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ 430#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ 431#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ 432#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ 433#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ 434#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ 435 436#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ 437#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ 438#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ 439#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ 440#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ 441#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ 442#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ 443#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ 444#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ 445#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ 446#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ 447#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ 448#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ 449 450 451/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ 452#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ 453#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ 454#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ 455#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ 456#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ 457 458 459/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ 460#define TWI0_REGBASE 0xFFC01400 461#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ 462#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */ 463#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ 464#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ 465#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ 466#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ 467#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ 468#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ 469#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ 470#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ 471#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ 472#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ 473#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ 474#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ 475#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ 476#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ 477 478 479/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ 480#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ 481#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ 482#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ 483#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ 484#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ 485#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ 486#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ 487#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ 488#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ 489#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ 490#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ 491#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ 492#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ 493#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ 494#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ 495#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ 496#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ 497 498 499/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ 500#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ 501#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ 502#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ 503#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ 504#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ 505#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ 506#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ 507#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ 508#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ 509#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ 510#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ 511#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ 512#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ 513#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ 514#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ 515#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ 516#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ 517 518 519/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ 520#define UART1_THR 0xFFC02000 /* Transmit Holding register */ 521#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ 522#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ 523#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ 524#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ 525#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ 526#define UART1_LCR 0xFFC0200C /* Line Control Register */ 527#define UART1_MCR 0xFFC02010 /* Modem Control Register */ 528#define UART1_LSR 0xFFC02014 /* Line Status Register */ 529#define UART1_MSR 0xFFC02018 /* Modem Status Register */ 530#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ 531#define UART1_GCTL 0xFFC02024 /* Global Control Register */ 532 533 534/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */ 535 536/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ 537#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ 538#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ 539#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ 540#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ 541 542 543/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ 544#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ 545#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ 546#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ 547#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ 548#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ 549#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ 550#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ 551 552#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ 553#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ 554#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ 555#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ 556#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ 557#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ 558#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ 559 560/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ 561#define PORTF_MUX 0xFFC03210 /* Port F mux control */ 562#define PORTG_MUX 0xFFC03214 /* Port G mux control */ 563#define PORTH_MUX 0xFFC03218 /* Port H mux control */ 564#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ 565#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ 566#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ 567#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ 568#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ 569#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ 570#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ 571#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ 572#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ 573#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ 574#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ 575#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ 576 577 578/*********************************************************************************** 579** System MMR Register Bits And Macros 580** 581** Disclaimer: All macros are intended to make C and Assembly code more readable. 582** Use these macros carefully, as any that do left shifts for field 583** depositing will result in the lower order bits being destroyed. Any 584** macro that shifts left to properly position the bit-field should be 585** used as part of an OR to initialize a register and NOT as a dynamic 586** modifier UNLESS the lower order bits are saved and ORed back in when 587** the macro is used. 588*************************************************************************************/ 589 590/* CHIPID Masks */ 591#define CHIPID_VERSION 0xF0000000 592#define CHIPID_FAMILY 0x0FFFF000 593#define CHIPID_MANUFACTURE 0x00000FFE 594 595/* SWRST Masks */ 596#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ 597#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ 598#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ 599#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ 600#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ 601 602/* SYSCR Masks */ 603#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ 604#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ 605 606 607/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ 608/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ 609 610 611/* SIC_IAR0 Macros */ 612#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ 613#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ 614#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ 615#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ 616#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ 617#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ 618#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ 619#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ 620 621/* SIC_IAR1 Macros */ 622#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ 623#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ 624#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ 625#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ 626#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ 627#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ 628#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ 629#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ 630 631/* SIC_IAR2 Macros */ 632#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ 633#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ 634#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ 635#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ 636#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ 637#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ 638#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ 639#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ 640 641/* SIC_IAR3 Macros */ 642#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ 643#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ 644#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ 645#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ 646#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ 647#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ 648#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ 649#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ 650 651 652/* SIC_IMASK Masks */ 653#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ 654#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ 655#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ 656#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ 657 658/* SIC_IWR Masks */ 659#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ 660#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ 661#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ 662#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ 663 664 665/* ************** UART CONTROLLER MASKS *************************/ 666/* UARTx_LCR Masks */ 667#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ 668#define STB 0x04 /* Stop Bits */ 669#define PEN 0x08 /* Parity Enable */ 670#define EPS 0x10 /* Even Parity Select */ 671#define STP 0x20 /* Stick Parity */ 672#define SB 0x40 /* Set Break */ 673#define DLAB 0x80 /* Divisor Latch Access */ 674 675/* UARTx_MCR Mask */ 676#define LOOP_ENA 0x10 /* Loopback Mode Enable */ 677#define LOOP_ENA_P 0x04 678 679/* UARTx_LSR Masks */ 680#define DR 0x01 /* Data Ready */ 681#define OE 0x02 /* Overrun Error */ 682#define PE 0x04 /* Parity Error */ 683#define FE 0x08 /* Framing Error */ 684#define BI 0x10 /* Break Interrupt */ 685#define THRE 0x20 /* THR Empty */ 686#define TEMT 0x40 /* TSR and UART_THR Empty */ 687 688/* UARTx_IER Masks */ 689#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ 690#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ 691#define ELSI 0x04 /* Enable RX Status Interrupt */ 692 693/* UARTx_IIR Masks */ 694#define NINT 0x01 /* Pending Interrupt */ 695#define IIR_TX_READY 0x02 /* UART_THR empty */ 696#define IIR_RX_READY 0x04 /* Receive data ready */ 697#define IIR_LINE_CHANGE 0x06 /* Receive line status */ 698#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ 699 700/* UARTx_GCTL Masks */ 701#define UCEN 0x01 /* Enable UARTx Clocks */ 702#define IREN 0x02 /* Enable IrDA Mode */ 703#define TPOLC 0x04 /* IrDA TX Polarity Change */ 704#define RPOLC 0x08 /* IrDA RX Polarity Change */ 705#define FPE 0x10 /* Force Parity Error On Transmit */ 706#define FFE 0x20 /* Force Framing Error On Transmit */ 707 708 709/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ 710/* SPI_CTL Masks */ 711#define TIMOD 0x0003 /* Transfer Initiate Mode */ 712#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ 713#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ 714#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ 715#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ 716#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ 717#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ 718#define PSSE 0x0010 /* Slave-Select Input Enable */ 719#define EMISO 0x0020 /* Enable MISO As Output */ 720#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ 721#define LSBF 0x0200 /* LSB First */ 722#define CPHA 0x0400 /* Clock Phase */ 723#define CPOL 0x0800 /* Clock Polarity */ 724#define MSTR 0x1000 /* Master/Slave* */ 725#define WOM 0x2000 /* Write Open Drain Master */ 726#define SPE 0x4000 /* SPI Enable */ 727 728/* SPI_FLG Masks */ 729#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ 730#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ 731#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ 732#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ 733#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ 734#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ 735#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ 736#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ 737#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ 738#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ 739#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ 740#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ 741#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ 742#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ 743 744/* SPI_STAT Masks */ 745#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ 746#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ 747#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ 748#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ 749#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ 750#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ 751#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ 752 753 754/* **************** GENERAL PURPOSE TIMER MASKS **********************/ 755/* TIMER_ENABLE Masks */ 756#define TIMEN0 0x0001 /* Enable Timer 0 */ 757#define TIMEN1 0x0002 /* Enable Timer 1 */ 758#define TIMEN2 0x0004 /* Enable Timer 2 */ 759#define TIMEN3 0x0008 /* Enable Timer 3 */ 760#define TIMEN4 0x0010 /* Enable Timer 4 */ 761#define TIMEN5 0x0020 /* Enable Timer 5 */ 762#define TIMEN6 0x0040 /* Enable Timer 6 */ 763#define TIMEN7 0x0080 /* Enable Timer 7 */ 764 765/* TIMER_DISABLE Masks */ 766#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ 767#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ 768#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ 769#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ 770#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ 771#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ 772#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ 773#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ 774 775/* TIMER_STATUS Masks */ 776#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ 777#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ 778#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ 779#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ 780#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ 781#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ 782#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ 783#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ 784#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ 785#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ 786#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ 787#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ 788#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ 789#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ 790#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ 791#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ 792#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ 793#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ 794#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ 795#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ 796#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ 797#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ 798#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ 799#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ 800 801/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ 802#define TOVL_ERR0 TOVF_ERR0 803#define TOVL_ERR1 TOVF_ERR1 804#define TOVL_ERR2 TOVF_ERR2 805#define TOVL_ERR3 TOVF_ERR3 806#define TOVL_ERR4 TOVF_ERR4 807#define TOVL_ERR5 TOVF_ERR5 808#define TOVL_ERR6 TOVF_ERR6 809#define TOVL_ERR7 TOVF_ERR7 810 811/* TIMERx_CONFIG Masks */ 812#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ 813#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ 814#define EXT_CLK 0x0003 /* External Clock Mode */ 815#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ 816#define PERIOD_CNT 0x0008 /* Period Count */ 817#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ 818#define TIN_SEL 0x0020 /* Timer Input Select */ 819#define OUT_DIS 0x0040 /* Output Pad Disable */ 820#define CLK_SEL 0x0080 /* Timer Clock Select */ 821#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ 822#define EMU_RUN 0x0200 /* Emulation Behavior Select */ 823#define ERR_TYP 0xC000 /* Error Type */ 824 825 826/* ****************** GPIO PORTS F, G, H MASKS ***********************/ 827/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ 828/* Port F Masks */ 829#define PF0 0x0001 830#define PF1 0x0002 831#define PF2 0x0004 832#define PF3 0x0008 833#define PF4 0x0010 834#define PF5 0x0020 835#define PF6 0x0040 836#define PF7 0x0080 837#define PF8 0x0100 838#define PF9 0x0200 839#define PF10 0x0400 840#define PF11 0x0800 841#define PF12 0x1000 842#define PF13 0x2000 843#define PF14 0x4000 844#define PF15 0x8000 845 846/* Port G Masks */ 847#define PG0 0x0001 848#define PG1 0x0002 849#define PG2 0x0004 850#define PG3 0x0008 851#define PG4 0x0010 852#define PG5 0x0020 853#define PG6 0x0040 854#define PG7 0x0080 855#define PG8 0x0100 856#define PG9 0x0200 857#define PG10 0x0400 858#define PG11 0x0800 859#define PG12 0x1000 860#define PG13 0x2000 861#define PG14 0x4000 862#define PG15 0x8000 863 864/* Port H Masks */ 865#define PH0 0x0001 866#define PH1 0x0002 867#define PH2 0x0004 868#define PH3 0x0008 869#define PH4 0x0010 870#define PH5 0x0020 871#define PH6 0x0040 872#define PH7 0x0080 873#define PH8 0x0100 874#define PH9 0x0200 875#define PH10 0x0400 876#define PH11 0x0800 877#define PH12 0x1000 878#define PH13 0x2000 879#define PH14 0x4000 880#define PH15 0x8000 881 882/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ 883/* EBIU_AMGCTL Masks */ 884#define AMCKEN 0x0001 /* Enable CLKOUT */ 885#define AMBEN_NONE 0x0000 /* All Banks Disabled */ 886#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ 887#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ 888#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ 889#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ 890 891/* EBIU_AMBCTL0 Masks */ 892#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ 893#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ 894#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ 895#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ 896#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ 897#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ 898#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ 899#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ 900#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ 901#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ 902#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 903#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 904#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 905#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 906#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ 907#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ 908#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ 909#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ 910#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ 911#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ 912#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ 913#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ 914#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ 915#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ 916#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ 917#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ 918#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ 919#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ 920#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ 921#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ 922#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ 923#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ 924#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ 925#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ 926#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ 927#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ 928#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ 929#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ 930#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ 931#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ 932#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ 933#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ 934#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ 935#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ 936 937#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ 938#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ 939#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ 940#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ 941#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ 942#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ 943#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ 944#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ 945#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ 946#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ 947#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 948#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 949#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 950#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 951#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ 952#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ 953#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ 954#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ 955#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ 956#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ 957#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ 958#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ 959#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ 960#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ 961#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ 962#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ 963#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ 964#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ 965#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ 966#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ 967#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ 968#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ 969#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ 970#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ 971#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ 972#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ 973#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ 974#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ 975#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ 976#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ 977#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ 978#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ 979#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ 980#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ 981 982/* EBIU_AMBCTL1 Masks */ 983#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ 984#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ 985#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ 986#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ 987#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ 988#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ 989#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ 990#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ 991#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ 992#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ 993#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 994#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 995#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 996#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 997#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ 998#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ 999#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ 1000#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ 1001#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ 1002#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ 1003#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ 1004#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ 1005#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ 1006#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ 1007#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ 1008#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ 1009#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ 1010#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ 1011#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ 1012#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ 1013#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ 1014#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ 1015#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ 1016#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ 1017#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ 1018#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ 1019#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ 1020#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ 1021#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ 1022#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ 1023#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ 1024#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ 1025#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ 1026#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ 1027 1028#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ 1029#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ 1030#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ 1031#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ 1032#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ 1033#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ 1034#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ 1035#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ 1036#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ 1037#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ 1038#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 1039#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 1040#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 1041#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 1042#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ 1043#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ 1044#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ 1045#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ 1046#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ 1047#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ 1048#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ 1049#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ 1050#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ 1051#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ 1052#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ 1053#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ 1054#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ 1055#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ 1056#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ 1057#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ 1058#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ 1059#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ 1060#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ 1061#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ 1062#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ 1063#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ 1064#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ 1065#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ 1066#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ 1067#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ 1068#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ 1069#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ 1070#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ 1071#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ 1072 1073 1074/* ********************** SDRAM CONTROLLER MASKS **********************************************/ 1075/* EBIU_SDGCTL Masks */ 1076#define SCTLE 0x00000001 /* Enable SDRAM Signals */ 1077#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ 1078#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ 1079#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ 1080#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ 1081#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ 1082#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ 1083#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ 1084#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ 1085#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ 1086#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ 1087#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ 1088#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ 1089#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ 1090#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ 1091#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ 1092#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ 1093#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ 1094#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ 1095#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ 1096#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ 1097#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ 1098#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ 1099#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ 1100#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ 1101#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ 1102#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ 1103#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ 1104#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ 1105#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ 1106#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ 1107#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ 1108#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ 1109#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ 1110#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ 1111#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ 1112#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ 1113#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ 1114#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ 1115#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ 1116#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ 1117#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ 1118#define EBUFE 0x02000000 /* Enable External Buffering Timing */ 1119#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ 1120#define EMREN 0x10000000 /* Extended Mode Register Enable */ 1121#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ 1122#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ 1123 1124/* EBIU_SDBCTL Masks */ 1125#define EBE 0x0001 /* Enable SDRAM External Bank */ 1126#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ 1127#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ 1128#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ 1129#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ 1130#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ 1131#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ 1132#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ 1133#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ 1134#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ 1135#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ 1136 1137/* EBIU_SDSTAT Masks */ 1138#define SDCI 0x0001 /* SDRAM Controller Idle */ 1139#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ 1140#define SDPUA 0x0004 /* SDRAM Power-Up Active */ 1141#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ 1142#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ 1143#define BGSTAT 0x0020 /* Bus Grant Status */ 1144 1145 1146/* ************************** DMA CONTROLLER MASKS ********************************/ 1147 1148/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ 1149#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ 1150#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ 1151#define PMAP_PPI 0x0000 /* PPI Port DMA */ 1152#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ 1153#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ 1154#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ 1155#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ 1156#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ 1157#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ 1158#define PMAP_SPI 0x7000 /* SPI Port DMA */ 1159#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ 1160#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ 1161#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ 1162#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ 1163 1164/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ 1165/* PPI_CONTROL Masks */ 1166#define PORT_EN 0x0001 /* PPI Port Enable */ 1167#define PORT_DIR 0x0002 /* PPI Port Direction */ 1168#define XFR_TYPE 0x000C /* PPI Transfer Type */ 1169#define PORT_CFG 0x0030 /* PPI Port Configuration */ 1170#define FLD_SEL 0x0040 /* PPI Active Field Select */ 1171#define PACK_EN 0x0080 /* PPI Packing Mode */ 1172#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ 1173#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ 1174#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ 1175#define DLEN_8 0x0000 /* Data Length = 8 Bits */ 1176#define DLEN_10 0x0800 /* Data Length = 10 Bits */ 1177#define DLEN_11 0x1000 /* Data Length = 11 Bits */ 1178#define DLEN_12 0x1800 /* Data Length = 12 Bits */ 1179#define DLEN_13 0x2000 /* Data Length = 13 Bits */ 1180#define DLEN_14 0x2800 /* Data Length = 14 Bits */ 1181#define DLEN_15 0x3000 /* Data Length = 15 Bits */ 1182#define DLEN_16 0x3800 /* Data Length = 16 Bits */ 1183#define DLENGTH 0x3800 /* PPI Data Length */ 1184#define POLC 0x4000 /* PPI Clock Polarity */ 1185#define POLS 0x8000 /* PPI Frame Sync Polarity */ 1186 1187/* PPI_STATUS Masks */ 1188#define FLD 0x0400 /* Field Indicator */ 1189#define FT_ERR 0x0800 /* Frame Track Error */ 1190#define OVR 0x1000 /* FIFO Overflow Error */ 1191#define UNDR 0x2000 /* FIFO Underrun Error */ 1192#define ERR_DET 0x4000 /* Error Detected Indicator */ 1193#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ 1194 1195 1196/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ 1197/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ 1198#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ 1199#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ 1200 1201/* TWI_PRESCALE Masks */ 1202#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ 1203#define TWI_ENA 0x0080 /* TWI Enable */ 1204#define SCCB 0x0200 /* SCCB Compatibility Enable */ 1205 1206/* TWI_SLAVE_CTL Masks */ 1207#define SEN 0x0001 /* Slave Enable */ 1208#define SADD_LEN 0x0002 /* Slave Address Length */ 1209#define STDVAL 0x0004 /* Slave Transmit Data Valid */ 1210#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ 1211#define GEN 0x0010 /* General Call Adrress Matching Enabled */ 1212 1213/* TWI_SLAVE_STAT Masks */ 1214#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ 1215#define GCALL 0x0002 /* General Call Indicator */ 1216 1217/* TWI_MASTER_CTL Masks */ 1218#define MEN 0x0001 /* Master Mode Enable */ 1219#define MADD_LEN 0x0002 /* Master Address Length */ 1220#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ 1221#define FAST 0x0008 /* Use Fast Mode Timing Specs */ 1222#define STOP 0x0010 /* Issue Stop Condition */ 1223#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ 1224#define DCNT 0x3FC0 /* Data Bytes To Transfer */ 1225#define SDAOVR 0x4000 /* Serial Data Override */ 1226#define SCLOVR 0x8000 /* Serial Clock Override */ 1227 1228/* TWI_MASTER_STAT Masks */ 1229#define MPROG 0x0001 /* Master Transfer In Progress */ 1230#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ 1231#define ANAK 0x0004 /* Address Not Acknowledged */ 1232#define DNAK 0x0008 /* Data Not Acknowledged */ 1233#define BUFRDERR 0x0010 /* Buffer Read Error */ 1234#define BUFWRERR 0x0020 /* Buffer Write Error */ 1235#define SDASEN 0x0040 /* Serial Data Sense */ 1236#define SCLSEN 0x0080 /* Serial Clock Sense */ 1237#define BUSBUSY 0x0100 /* Bus Busy Indicator */ 1238 1239/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ 1240#define SINIT 0x0001 /* Slave Transfer Initiated */ 1241#define SCOMP 0x0002 /* Slave Transfer Complete */ 1242#define SERR 0x0004 /* Slave Transfer Error */ 1243#define SOVF 0x0008 /* Slave Overflow */ 1244#define MCOMP 0x0010 /* Master Transfer Complete */ 1245#define MERR 0x0020 /* Master Transfer Error */ 1246#define XMTSERV 0x0040 /* Transmit FIFO Service */ 1247#define RCVSERV 0x0080 /* Receive FIFO Service */ 1248 1249/* TWI_FIFO_CTRL Masks */ 1250#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ 1251#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ 1252#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ 1253#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ 1254 1255/* TWI_FIFO_STAT Masks */ 1256#define XMTSTAT 0x0003 /* Transmit FIFO Status */ 1257#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ 1258#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ 1259#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ 1260 1261#define RCVSTAT 0x000C /* Receive FIFO Status */ 1262#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ 1263#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ 1264#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ 1265 1266 1267/* Omit CAN masks from defBF534.h */ 1268 1269/* ******************* PIN CONTROL REGISTER MASKS ************************/ 1270/* PORT_MUX Masks */ 1271#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ 1272#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ 1273#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ 1274 1275#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ 1276#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ 1277#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ 1278#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ 1279 1280#define PFDE 0x0008 /* Port F DMA Request Enable */ 1281#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ 1282#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ 1283 1284#define PFTE 0x0010 /* Port F Timer Enable */ 1285#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ 1286#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ 1287 1288#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ 1289#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ 1290#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ 1291 1292#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ 1293#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ 1294#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ 1295 1296#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ 1297#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ 1298#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ 1299 1300#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ 1301#define PFFE_TIMER 0x0000 /* Enable TMR2 */ 1302#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ 1303 1304#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ 1305#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ 1306#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ 1307 1308#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ 1309#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ 1310#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ 1311 1312#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ 1313#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ 1314#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ 1315 1316 1317/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ 1318/* HDMAx_CTL Masks */ 1319#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ 1320#define REP 0x0002 /* HDMA Request Polarity */ 1321#define UTE 0x0004 /* Urgency Threshold Enable */ 1322#define OIE 0x0010 /* Overflow Interrupt Enable */ 1323#define BDIE 0x0020 /* Block Done Interrupt Enable */ 1324#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ 1325#define DRQ 0x0300 /* HDMA Request Type */ 1326#define DRQ_NONE 0x0000 /* No Request */ 1327#define DRQ_SINGLE 0x0100 /* Channels Request Single */ 1328#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ 1329#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ 1330#define RBC 0x1000 /* Reload BCNT With IBCNT */ 1331#define PS 0x2000 /* HDMA Pin Status */ 1332#define OI 0x4000 /* Overflow Interrupt Generated */ 1333#define BDI 0x8000 /* Block Done Interrupt Generated */ 1334 1335/* entry addresses of the user-callable Boot ROM functions */ 1336 1337#define _BOOTROM_RESET 0xEF000000 1338#define _BOOTROM_FINAL_INIT 0xEF000002 1339#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 1340#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 1341#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A 1342#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C 1343#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 1344#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 1345#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 1346 1347/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ 1348#define PGDE_UART PFDE_UART 1349#define PGDE_DMA PFDE_DMA 1350#define CKELOW SCKELOW 1351 1352/* ==== end from defBF534.h ==== */ 1353 1354/* HOST Port Registers */ 1355 1356#define HOST_CONTROL 0xffc03400 /* HOST Control Register */ 1357#define HOST_STATUS 0xffc03404 /* HOST Status Register */ 1358#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */ 1359 1360/* Counter Registers */ 1361 1362#define CNT_CONFIG 0xffc03500 /* Configuration Register */ 1363#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */ 1364#define CNT_STATUS 0xffc03508 /* Status Register */ 1365#define CNT_COMMAND 0xffc0350c /* Command Register */ 1366#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */ 1367#define CNT_COUNTER 0xffc03514 /* Counter Register */ 1368#define CNT_MAX 0xffc03518 /* Maximal Count Register */ 1369#define CNT_MIN 0xffc0351c /* Minimal Count Register */ 1370 1371/* OTP/FUSE Registers */ 1372 1373#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */ 1374#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */ 1375#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */ 1376#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */ 1377 1378/* Security Registers */ 1379 1380#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */ 1381#define SECURE_CONTROL 0xffc03624 /* Secure Control */ 1382#define SECURE_STATUS 0xffc03628 /* Secure Status */ 1383 1384/* OTP Read/Write Data Buffer Registers */ 1385 1386#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1387#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1388#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1389#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1390 1391/* NFC Registers */ 1392 1393#define NFC_CTL 0xffc03700 /* NAND Control Register */ 1394#define NFC_STAT 0xffc03704 /* NAND Status Register */ 1395#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */ 1396#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */ 1397#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */ 1398#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */ 1399#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */ 1400#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */ 1401#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */ 1402#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */ 1403#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */ 1404#define NFC_READ 0xffc0372c /* NAND Read Data Register */ 1405#define NFC_ADDR 0xffc03740 /* NAND Address Register */ 1406#define NFC_CMD 0xffc03744 /* NAND Command Register */ 1407#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */ 1408#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */ 1409 1410/* ********************************************************** */ 1411/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ 1412/* and MULTI BIT READ MACROS */ 1413/* ********************************************************** */ 1414 1415/* Bit masks for HOST_CONTROL */ 1416 1417#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */ 1418#define HOST_CNTR_nHOST_EN 0x0 1419#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */ 1420#define HOST_CNTR_nHOST_END 0x0 1421#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */ 1422#define HOST_CNTR_nDATA_SIZE 0x0 1423#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */ 1424#define HOST_CNTR_nHOST_RST 0x0 1425#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */ 1426#define HOST_CNTR_nHRDY_OVR 0x0 1427#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */ 1428#define HOST_CNTR_nINT_MODE 0x0 1429#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */ 1430#define HOST_CNTR_ nBT_EN 0x0 1431#define HOST_CNTR_EHW 0x100 /* Enable Host Write */ 1432#define HOST_CNTR_nEHW 0x0 1433#define HOST_CNTR_EHR 0x200 /* Enable Host Read */ 1434#define HOST_CNTR_nEHR 0x0 1435#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */ 1436#define HOST_CNTR_nBDR 0x0 1437 1438/* Bit masks for HOST_STATUS */ 1439 1440#define HOST_STAT_READY 0x1 /* DMA Ready */ 1441#define HOST_STAT_nREADY 0x0 1442#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */ 1443#define HOST_STAT_nFIFOFULL 0x0 1444#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */ 1445#define HOST_STAT_nFIFOEMPTY 0x0 1446#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */ 1447#define HOST_STAT_nCOMPLETE 0x0 1448#define HOST_STAT_HSHK 0x10 /* Host Handshake */ 1449#define HOST_STAT_nHSHK 0x0 1450#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */ 1451#define HOST_STAT_nTIMEOUT 0x0 1452#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */ 1453#define HOST_STAT_nHIRQ 0x0 1454#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */ 1455#define HOST_STAT_nALLOW_CNFG 0x0 1456#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */ 1457#define HOST_STAT_nDMA_DIR 0x0 1458#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */ 1459#define HOST_STAT_nBTE 0x0 1460#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ 1461#define HOST_STAT_nHOSTRD_DONE 0x0 1462 1463/* Bit masks for HOST_TIMEOUT */ 1464 1465#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ 1466 1467/* Bit masks for SECURE_SYSSWT */ 1468 1469#define EMUDABL 0x1 /* Emulation Disable. */ 1470#define nEMUDABL 0x0 1471#define RSTDABL 0x2 /* Reset Disable */ 1472#define nRSTDABL 0x0 1473#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ 1474#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ 1475#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ 1476#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ 1477#define nDMA0OVR 0x0 1478#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ 1479#define nDMA1OVR 0x0 1480#define EMUOVR 0x4000 /* Emulation Override */ 1481#define nEMUOVR 0x0 1482#define OTPSEN 0x8000 /* OTP Secrets Enable. */ 1483#define nOTPSEN 0x0 1484#define L2DABL 0x70000 /* L2 Memory Disable. */ 1485 1486/* Bit masks for SECURE_CONTROL */ 1487 1488#define SECURE0 0x1 /* SECURE 0 */ 1489#define nSECURE0 0x0 1490#define SECURE1 0x2 /* SECURE 1 */ 1491#define nSECURE1 0x0 1492#define SECURE2 0x4 /* SECURE 2 */ 1493#define nSECURE2 0x0 1494#define SECURE3 0x8 /* SECURE 3 */ 1495#define nSECURE3 0x0 1496 1497/* Bit masks for SECURE_STATUS */ 1498 1499#define SECMODE 0x3 /* Secured Mode Control State */ 1500#define NMI 0x4 /* Non Maskable Interrupt */ 1501#define nNMI 0x0 1502#define AFVALID 0x8 /* Authentication Firmware Valid */ 1503#define nAFVALID 0x0 1504#define AFEXIT 0x10 /* Authentication Firmware Exit */ 1505#define nAFEXIT 0x0 1506#define SECSTAT 0xe0 /* Secure Status */ 1507 1508#endif /* _DEF_BF52X_H */ 1509