1/* 2 * include/asm-arm/arch-realview/board-pba8.h 3 * 4 * Copyright (C) 2008 ARM Limited 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, 18 * MA 02110-1301, USA. 19 */ 20 21#ifndef __ASM_ARCH_BOARD_PBA8_H 22#define __ASM_ARCH_BOARD_PBA8_H 23 24#include <mach/platform.h> 25 26/* 27 * Peripheral addresses 28 */ 29#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */ 30#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */ 31#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */ 32#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */ 33#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ 34#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ 35#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */ 36#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ 37#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ 38#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */ 39#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */ 40#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ 41#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ 42#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */ 43#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */ 44#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ 45#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */ 46#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */ 47#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */ 48#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ 49#define REALVIEW_PBA8_FLASH0_BASE 0x40000000 50#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M 51#define REALVIEW_PBA8_FLASH1_BASE 0x44000000 52#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M 53#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */ 54#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */ 55#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ 56#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */ 57#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ 58#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ 59 60#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74 61 62/* 63 * PBA8 PCI regions 64 */ 65#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */ 66#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ 67#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ 68 69#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */ 70#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ 71#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ 72 73#endif /* __ASM_ARCH_BOARD_PBA8_H */ 74