1#ifndef __ASM_ARCH_REGS_UART_H 2#define __ASM_ARCH_REGS_UART_H 3 4/* 5 * UARTs 6 */ 7 8/* Full Function UART (FFUART) */ 9#define FFUART FFRBR 10#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ 11#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ 12#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ 13#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ 14#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ 15#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ 16#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ 17#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ 18#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ 19#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ 20#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ 21#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ 22#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ 23 24/* Bluetooth UART (BTUART) */ 25#define BTUART BTRBR 26#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ 27#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ 28#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ 29#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ 30#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ 31#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ 32#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ 33#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ 34#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ 35#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ 36#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ 37#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ 38#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ 39 40/* Standard UART (STUART) */ 41#define STUART STRBR 42#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ 43#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ 44#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ 45#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ 46#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ 47#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ 48#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ 49#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ 50#define STMSR __REG(0x40700018) /* Reserved */ 51#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ 52#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ 53#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ 54#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ 55 56/* Hardware UART (HWUART) */ 57#define HWUART HWRBR 58#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ 59#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ 60#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ 61#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ 62#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ 63#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ 64#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ 65#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ 66#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ 67#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ 68#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ 69#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ 70#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ 71#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ 72#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ 73#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ 74 75#define IER_DMAE (1 << 7) /* DMA Requests Enable */ 76#define IER_UUE (1 << 6) /* UART Unit Enable */ 77#define IER_NRZE (1 << 5) /* NRZ coding Enable */ 78#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ 79#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ 80#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ 81#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ 82#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ 83 84#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ 85#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ 86#define IIR_TOD (1 << 3) /* Time Out Detected */ 87#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ 88#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ 89#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ 90 91#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ 92#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ 93#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ 94#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ 95#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ 96#define FCR_ITL_1 (0) 97#define FCR_ITL_8 (FCR_ITL1) 98#define FCR_ITL_16 (FCR_ITL2) 99#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) 100 101#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ 102#define LCR_SB (1 << 6) /* Set Break */ 103#define LCR_STKYP (1 << 5) /* Sticky Parity */ 104#define LCR_EPS (1 << 4) /* Even Parity Select */ 105#define LCR_PEN (1 << 3) /* Parity Enable */ 106#define LCR_STB (1 << 2) /* Stop Bit */ 107#define LCR_WLS1 (1 << 1) /* Word Length Select */ 108#define LCR_WLS0 (1 << 0) /* Word Length Select */ 109 110#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ 111#define LSR_TEMT (1 << 6) /* Transmitter Empty */ 112#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ 113#define LSR_BI (1 << 4) /* Break Interrupt */ 114#define LSR_FE (1 << 3) /* Framing Error */ 115#define LSR_PE (1 << 2) /* Parity Error */ 116#define LSR_OE (1 << 1) /* Overrun Error */ 117#define LSR_DR (1 << 0) /* Data Ready */ 118 119#define MCR_LOOP (1 << 4) 120#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ 121#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ 122#define MCR_RTS (1 << 1) /* Request to Send */ 123#define MCR_DTR (1 << 0) /* Data Terminal Ready */ 124 125#define MSR_DCD (1 << 7) /* Data Carrier Detect */ 126#define MSR_RI (1 << 6) /* Ring Indicator */ 127#define MSR_DSR (1 << 5) /* Data Set Ready */ 128#define MSR_CTS (1 << 4) /* Clear To Send */ 129#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ 130#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ 131#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ 132#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ 133 134/* 135 * IrSR (Infrared Selection Register) 136 */ 137#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ 138#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ 139#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ 140#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ 141#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ 142 143#endif /* __ASM_ARCH_REGS_UART_H */ 144