1/*
2 * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
3 *		created for each DLCI associated with a FRAD.  The FRAD driver
4 *		is not truly a network device, but the lower level device
5 *		handler.  This allows other FRAD manufacturers to use the DLCI
6 *		code, including its RFC1490 encapsulation alongside the current
7 *		implementation for the Sangoma cards.
8 *
9 * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
10 *
11 * Author:	Mike McLagan <mike.mclagan@linux.org>
12 *
13 * Changes:
14 *		0.15	Mike McLagan	changed structure defs (packed)
15 *					re-arranged flags
16 *					added DLCI_RET vars
17 *
18 *		This program is free software; you can redistribute it and/or
19 *		modify it under the terms of the GNU General Public License
20 *		as published by the Free Software Foundation; either version
21 *		2 of the License, or (at your option) any later version.
22 */
23
24#ifndef _FRAD_H_
25#define _FRAD_H_
26
27#include <linux/config.h>
28#include <linux/if.h>
29
30#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
31
32/* Structures and constants associated with the DLCI device driver */
33
34struct dlci_add
35{
36   char  devname[IFNAMSIZ];
37   short dlci;
38};
39
40#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
41#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
42
43/*
44 * These are related to the Sangoma SDLA and should remain in order.
45 * Code within the SDLA module is based on the specifics of this
46 * structure.  Change at your own peril.
47 */
48struct dlci_conf {
49   short flags;
50   short CIR_fwd;
51   short Bc_fwd;
52   short Be_fwd;
53   short CIR_bwd;
54   short Bc_bwd;
55   short Be_bwd;
56
57/* these are part of the status read */
58   short Tc_fwd;
59   short Tc_bwd;
60   short Tf_max;
61   short Tb_max;
62
63/* add any new fields here above is a mirror of sdla_dlci_conf */
64};
65
66#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
67
68/* configuration flags for DLCI */
69#define DLCI_IGNORE_CIR_OUT	0x0001
70#define DLCI_ACCOUNT_CIR_IN	0x0002
71#define DLCI_BUFFER_IF		0x0008
72
73#define DLCI_VALID_FLAGS	0x000B
74
75/* FRAD driver uses these to indicate what it did with packet */
76#define DLCI_RET_OK		0x00
77#define DLCI_RET_ERR		0x01
78#define DLCI_RET_DROP		0x02
79
80/* defines for the actual Frame Relay hardware */
81#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
82#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
83
84#define FRAD_LAST_IOCTL	FRAD_SET_CONF
85
86/*
87 * Based on the setup for the Sangoma SDLA.  If changes are
88 * necessary to this structure, a routine will need to be
89 * added to that module to copy fields.
90 */
91struct frad_conf
92{
93   short station;
94   short flags;
95   short kbaud;
96   short clocking;
97   short mtu;
98   short T391;
99   short T392;
100   short N391;
101   short N392;
102   short N393;
103   short CIR_fwd;
104   short Bc_fwd;
105   short Be_fwd;
106   short CIR_bwd;
107   short Bc_bwd;
108   short Be_bwd;
109
110/* Add new fields here, above is a mirror of the sdla_conf */
111
112};
113
114#define FRAD_STATION_CPE	0x0000
115#define FRAD_STATION_NODE	0x0001
116
117#define FRAD_TX_IGNORE_CIR	0x0001
118#define FRAD_RX_ACCOUNT_CIR	0x0002
119#define FRAD_DROP_ABORTED	0x0004
120#define FRAD_BUFFERIF		0x0008
121#define FRAD_STATS		0x0010
122#define FRAD_MCI		0x0100
123#define FRAD_AUTODLCI		0x8000
124#define FRAD_VALID_FLAGS	0x811F
125
126#define FRAD_CLOCK_INT		0x0001
127#define FRAD_CLOCK_EXT		0x0000
128
129#ifdef __KERNEL__
130
131/* these are the fields of an RFC 1490 header */
132struct frhdr
133{
134   unsigned char  control	__attribute__((packed));
135
136   /* for IP packets, this can be the NLPID */
137   unsigned char  pad		__attribute__((packed));
138
139   unsigned char  NLPID		__attribute__((packed));
140   unsigned char  OUI[3]	__attribute__((packed));
141   unsigned short PID		__attribute__((packed));
142
143#define IP_NLPID pad
144};
145
146/* see RFC 1490 for the definition of the following */
147#define FRAD_I_UI		0x03
148
149#define FRAD_P_PADDING		0x00
150#define FRAD_P_Q933		0x08
151#define FRAD_P_SNAP		0x80
152#define FRAD_P_CLNP		0x81
153#define FRAD_P_IP		0xCC
154
155struct dlci_local
156{
157   struct net_device_stats stats;
158   struct net_device          *slave;
159   struct dlci_conf       config;
160   int                    configured;
161
162   /* callback function */
163   void              (*receive)(struct sk_buff *skb, struct net_device *);
164};
165
166struct frad_local
167{
168   struct net_device_stats stats;
169
170   /* devices which this FRAD is slaved to */
171   struct net_device     *master[CONFIG_DLCI_MAX];
172   short             dlci[CONFIG_DLCI_MAX];
173
174   struct frad_conf  config;
175   int               configured;	/* has this device been configured */
176   int               initialized;	/* mem_start, port, irq set ? */
177
178   /* callback functions */
179   int               (*activate)(struct net_device *, struct net_device *);
180   int               (*deactivate)(struct net_device *, struct net_device *);
181   int               (*assoc)(struct net_device *, struct net_device *);
182   int               (*deassoc)(struct net_device *, struct net_device *);
183   int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
184
185   /* fields that are used by the Sangoma SDLA cards */
186   struct timer_list timer;
187   int               type;		/* adapter type */
188   int               state;		/* state of the S502/8 control latch */
189   int               buffer;		/* current buffer for S508 firmware */
190};
191
192int register_frad(const char *name);
193int unregister_frad(const char *name);
194
195extern int (*dlci_ioctl_hook)(unsigned int, void *);
196
197#endif /* __KERNEL__ */
198
199#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
200
201#endif
202