Searched hist:288 (Results 1 - 19 of 19) sorted by relevance
/freebsd-11.0-release/usr.sbin/mfiutil/ | ||
H A D | mfi_config.c | diff 233713 Fri Mar 30 23:46:35 MDT 2012 ambrisko MFhead_mfi r233621 Remove the magic mfi_array is 288 bytes and just use the sizeof the array since it is not 288 bytes. Change reporting of a "SYSTEM" disk to "JBOD" to match LSI MegaCli and firmware reporting. This means that fiutil command to "create jbod" is now a little confusing since a RAID per drive is not really what LSI defines JBOD to be. This should be fixed in the future and support added to really create LSI JBOD and enable that feature on cards that support it. diff 233713 Fri Mar 30 23:46:35 MDT 2012 ambrisko MFhead_mfi r233621 Remove the magic mfi_array is 288 bytes and just use the sizeof the array since it is not 288 bytes. Change reporting of a "SYSTEM" disk to "JBOD" to match LSI MegaCli and firmware reporting. This means that fiutil command to "create jbod" is now a little confusing since a RAID per drive is not really what LSI defines JBOD to be. This should be fixed in the future and support added to really create LSI JBOD and enable that feature on cards that support it. |
H A D | mfi_drive.c | diff 233713 Fri Mar 30 23:46:35 MDT 2012 ambrisko MFhead_mfi r233621 Remove the magic mfi_array is 288 bytes and just use the sizeof the array since it is not 288 bytes. Change reporting of a "SYSTEM" disk to "JBOD" to match LSI MegaCli and firmware reporting. This means that fiutil command to "create jbod" is now a little confusing since a RAID per drive is not really what LSI defines JBOD to be. This should be fixed in the future and support added to really create LSI JBOD and enable that feature on cards that support it. diff 233713 Fri Mar 30 23:46:35 MDT 2012 ambrisko MFhead_mfi r233621 Remove the magic mfi_array is 288 bytes and just use the sizeof the array since it is not 288 bytes. Change reporting of a "SYSTEM" disk to "JBOD" to match LSI MegaCli and firmware reporting. This means that fiutil command to "create jbod" is now a little confusing since a RAID per drive is not really what LSI defines JBOD to be. This should be fixed in the future and support added to really create LSI JBOD and enable that feature on cards that support it. |
/freebsd-11.0-release/sys/dev/ath/ath_hal/ | ||
H A D | ah_desc.h | diff 237153 Sat Jun 16 04:47:20 MDT 2012 adrian Shuffle some more fields in ath_buf so it's not too big. This shaves off 20 bytes - from 288 bytes to 268 bytes. However, it's still too big. |
/freebsd-11.0-release/sys/x86/iommu/ | ||
H A D | intel_dmar.h | diff 277023 Sun Jan 11 20:29:15 MST 2015 kib Right now, for non-coherent DMARs, page table update code flushes the cache for whole page containing modified pte, and more, only last page in the series of the consequtive pages is flushed (i.e. the affected mappings should be larger than 2MB). Avoid excessive flushing and do missed neccessary flushing, by splitting invalidation and unmapping. For now, flush exactly the range of the changed pte. This is still somewhat bigger than neccessary, since pte is 8 bytes, while cache flush line is at least 32 bytes. The originator of the issue reports that after the change, 'dmar_bus_dmamap_unload went from 13,288 cycles down to 3,257. dmar_bus_dmamap_load_buffer went from 9,686 cycles down to 3,517. and I am now able to get line 1GbE speed with Netperf TCP (even with 1K message size).' Diagnosed and tested by: Nadav Amit <nadav.amit@gmail.com> Sponsored by: The FreeBSD Foundation MFC after: 1 week |
H A D | intel_idpgtbl.c | diff 277023 Sun Jan 11 20:29:15 MST 2015 kib Right now, for non-coherent DMARs, page table update code flushes the cache for whole page containing modified pte, and more, only last page in the series of the consequtive pages is flushed (i.e. the affected mappings should be larger than 2MB). Avoid excessive flushing and do missed neccessary flushing, by splitting invalidation and unmapping. For now, flush exactly the range of the changed pte. This is still somewhat bigger than neccessary, since pte is 8 bytes, while cache flush line is at least 32 bytes. The originator of the issue reports that after the change, 'dmar_bus_dmamap_unload went from 13,288 cycles down to 3,257. dmar_bus_dmamap_load_buffer went from 9,686 cycles down to 3,517. and I am now able to get line 1GbE speed with Netperf TCP (even with 1K message size).' Diagnosed and tested by: Nadav Amit <nadav.amit@gmail.com> Sponsored by: The FreeBSD Foundation MFC after: 1 week |
H A D | intel_ctx.c | diff 277023 Sun Jan 11 20:29:15 MST 2015 kib Right now, for non-coherent DMARs, page table update code flushes the cache for whole page containing modified pte, and more, only last page in the series of the consequtive pages is flushed (i.e. the affected mappings should be larger than 2MB). Avoid excessive flushing and do missed neccessary flushing, by splitting invalidation and unmapping. For now, flush exactly the range of the changed pte. This is still somewhat bigger than neccessary, since pte is 8 bytes, while cache flush line is at least 32 bytes. The originator of the issue reports that after the change, 'dmar_bus_dmamap_unload went from 13,288 cycles down to 3,257. dmar_bus_dmamap_load_buffer went from 9,686 cycles down to 3,517. and I am now able to get line 1GbE speed with Netperf TCP (even with 1K message size).' Diagnosed and tested by: Nadav Amit <nadav.amit@gmail.com> Sponsored by: The FreeBSD Foundation MFC after: 1 week |
H A D | intel_utils.c | diff 277023 Sun Jan 11 20:29:15 MST 2015 kib Right now, for non-coherent DMARs, page table update code flushes the cache for whole page containing modified pte, and more, only last page in the series of the consequtive pages is flushed (i.e. the affected mappings should be larger than 2MB). Avoid excessive flushing and do missed neccessary flushing, by splitting invalidation and unmapping. For now, flush exactly the range of the changed pte. This is still somewhat bigger than neccessary, since pte is 8 bytes, while cache flush line is at least 32 bytes. The originator of the issue reports that after the change, 'dmar_bus_dmamap_unload went from 13,288 cycles down to 3,257. dmar_bus_dmamap_load_buffer went from 9,686 cycles down to 3,517. and I am now able to get line 1GbE speed with Netperf TCP (even with 1K message size).' Diagnosed and tested by: Nadav Amit <nadav.amit@gmail.com> Sponsored by: The FreeBSD Foundation MFC after: 1 week |
/freebsd-11.0-release/sys/netpfil/ipfw/ | ||
H A D | ip_fw_table.h | diff 270001 Thu Aug 14 20:22:14 MDT 2014 melifaro * Add cidr:kfib algo type just for fun. It binds kernel fib of given number to a table. Example: # ipfw table fib2 create algo "cidr:kfib fib=2" # ipfw table fib2 info +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 # ipfw table fib2 list +++ table(fib2), set(0) +++ 10.0.0.0/24 0 127.0.0.1/32 0 ::/96 0 ::1/128 0 ::ffff:0.0.0.0/96 0 2a02:978:2::/112 0 fe80::/10 0 fe80:1::/64 0 fe80:2::/64 0 fe80:3::/64 0 ff02::/16 0 # ipfw table fib2 lookup 10.0.0.5 10.0.0.0/24 0 # ipfw table fib2 lookup 2a02:978:2::11 2a02:978:2::/112 0 # ipfw table fib2 detail +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 IPv4 algorithm radix info items: 0 itemsize: 200 IPv6 algorithm radix info items: 0 itemsize: 200 diff 270001 Thu Aug 14 20:22:14 MDT 2014 melifaro * Add cidr:kfib algo type just for fun. It binds kernel fib of given number to a table. Example: # ipfw table fib2 create algo "cidr:kfib fib=2" # ipfw table fib2 info +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 # ipfw table fib2 list +++ table(fib2), set(0) +++ 10.0.0.0/24 0 127.0.0.1/32 0 ::/96 0 ::1/128 0 ::ffff:0.0.0.0/96 0 2a02:978:2::/112 0 fe80::/10 0 fe80:1::/64 0 fe80:2::/64 0 fe80:3::/64 0 ff02::/16 0 # ipfw table fib2 lookup 10.0.0.5 10.0.0.0/24 0 # ipfw table fib2 lookup 2a02:978:2::11 2a02:978:2::/112 0 # ipfw table fib2 detail +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 IPv4 algorithm radix info items: 0 itemsize: 200 IPv6 algorithm radix info items: 0 itemsize: 200 |
H A D | ip_fw_table_algo.c | diff 270001 Thu Aug 14 20:22:14 MDT 2014 melifaro * Add cidr:kfib algo type just for fun. It binds kernel fib of given number to a table. Example: # ipfw table fib2 create algo "cidr:kfib fib=2" # ipfw table fib2 info +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 # ipfw table fib2 list +++ table(fib2), set(0) +++ 10.0.0.0/24 0 127.0.0.1/32 0 ::/96 0 ::1/128 0 ::ffff:0.0.0.0/96 0 2a02:978:2::/112 0 fe80::/10 0 fe80:1::/64 0 fe80:2::/64 0 fe80:3::/64 0 ff02::/16 0 # ipfw table fib2 lookup 10.0.0.5 10.0.0.0/24 0 # ipfw table fib2 lookup 2a02:978:2::11 2a02:978:2::/112 0 # ipfw table fib2 detail +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 IPv4 algorithm radix info items: 0 itemsize: 200 IPv6 algorithm radix info items: 0 itemsize: 200 diff 270001 Thu Aug 14 20:22:14 MDT 2014 melifaro * Add cidr:kfib algo type just for fun. It binds kernel fib of given number to a table. Example: # ipfw table fib2 create algo "cidr:kfib fib=2" # ipfw table fib2 info +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 # ipfw table fib2 list +++ table(fib2), set(0) +++ 10.0.0.0/24 0 127.0.0.1/32 0 ::/96 0 ::1/128 0 ::ffff:0.0.0.0/96 0 2a02:978:2::/112 0 fe80::/10 0 fe80:1::/64 0 fe80:2::/64 0 fe80:3::/64 0 ff02::/16 0 # ipfw table fib2 lookup 10.0.0.5 10.0.0.0/24 0 # ipfw table fib2 lookup 2a02:978:2::11 2a02:978:2::/112 0 # ipfw table fib2 detail +++ table(fib2), set(0) +++ kindex: 2, type: cidr, locked valtype: number, references: 0 algorithm: cidr:kfib fib=2 items: 11, size: 288 IPv4 algorithm radix info items: 0 itemsize: 200 IPv6 algorithm radix info items: 0 itemsize: 200 |
/freebsd-11.0-release/usr.bin/du/ | ||
H A D | du.c | diff 90389 Fri Feb 08 07:49:13 MST 2002 peter GRR. This was not WARNS=2 clean. You cannot printf a 'long' with '%qd'. usr.bin/du/du.c:288: warning: long long int format, long int arg (arg 2) Pointy hat to: markm |
/freebsd-11.0-release/sbin/ipfw/ | ||
H A D | tables.c | diff 269823 Mon Aug 11 18:19:46 MDT 2014 melifaro * Add the abilify to lock/unlock given table from changes. Example: # ipfw table si lock # ipfw table si info +++ table(si), set(0) +++ kindex: 0, type: cidr, locked valtype: number, references: 0 algorithm: cidr:radix items: 0, size: 288 # ipfw table si add 4.5.6.7 ignored: 4.5.6.7/32 0 ipfw: Adding record failed: table is locked # ipfw table si unlock # ipfw table si add 4.5.6.7 added: 4.5.6.7/32 0 # ipfw table si lock # ipfw table si delete 4.5.6.7 ignored: 4.5.6.7/32 0 ipfw: Deleting record failed: table is locked # ipfw table si unlock # ipfw table si delete 4.5.6.7 deleted: 4.5.6.7/32 0 |
/freebsd-11.0-release/sys/sys/ | ||
H A D | eventhandler.h | diff 243631 Tue Nov 27 21:36:13 MST 2012 andre Base the mbuf related limits on the available physical memory or kernel memory, whichever is lower. The overall mbuf related memory limit must be set so that mbufs (and clusters of various sizes) can't exhaust physical RAM or KVM. The limit is set to half of the physical RAM or KVM (whichever is lower) as the baseline. In any normal scenario we want to leave at least half of the physmem/kvm for other kernel functions and userspace to prevent it from swapping too easily. Via a tunable kern.maxmbufmem the limit can be upped to at most 3/4 of physmem/kvm. At the same time divorce maxfiles from maxusers and set maxfiles to physpages / 8 with a floor based on maxusers. This way busy servers can make use of the significantly increased mbuf limits with a much larger number of open sockets. Tidy up ordering in init_param2() and check up on some users of those values calculated here. Out of the overall mbuf memory limit 2K clusters and 4K (page size) clusters to get 1/4 each because these are the most heavily used mbuf sizes. 2K clusters are used for MTU 1500 ethernet inbound packets. 4K clusters are used whenever possible for sends on sockets and thus outbound packets. The larger cluster sizes of 9K and 16K are limited to 1/6 of the overall mbuf memory limit. When jumbo MTU's are used these large clusters will end up only on the inbound path. They are not used on outbound, there it's still 4K. Yes, that will stay that way because otherwise we run into lots of complications in the stack. And it really isn't a problem, so don't make a scene. Normal mbufs (256B) weren't limited at all previously. This was problematic as there are certain places in the kernel that on allocation failure of clusters try to piece together their packet from smaller mbufs. The mbuf limit is the number of all other mbuf sizes together plus some more to allow for standalone mbufs (ACK for example) and to send off a copy of a cluster. Unfortunately there isn't a way to set an overall limit for all mbuf memory together as UMA doesn't support such a limiting. NB: Every cluster also has an mbuf associated with it. Two examples on the revised mbuf sizing limits: 1GB KVM: 512MB limit for mbufs 419,430 mbufs 65,536 2K mbuf clusters 32,768 4K mbuf clusters 9,709 9K mbuf clusters 5,461 16K mbuf clusters 16GB RAM: 8GB limit for mbufs 33,554,432 mbufs 1,048,576 2K mbuf clusters 524,288 4K mbuf clusters 155,344 9K mbuf clusters 87,381 16K mbuf clusters These defaults should be sufficient for even the most demanding network loads. MFC after: 1 month |
H A D | mbuf.h | diff 243631 Tue Nov 27 21:36:13 MST 2012 andre Base the mbuf related limits on the available physical memory or kernel memory, whichever is lower. The overall mbuf related memory limit must be set so that mbufs (and clusters of various sizes) can't exhaust physical RAM or KVM. The limit is set to half of the physical RAM or KVM (whichever is lower) as the baseline. In any normal scenario we want to leave at least half of the physmem/kvm for other kernel functions and userspace to prevent it from swapping too easily. Via a tunable kern.maxmbufmem the limit can be upped to at most 3/4 of physmem/kvm. At the same time divorce maxfiles from maxusers and set maxfiles to physpages / 8 with a floor based on maxusers. This way busy servers can make use of the significantly increased mbuf limits with a much larger number of open sockets. Tidy up ordering in init_param2() and check up on some users of those values calculated here. Out of the overall mbuf memory limit 2K clusters and 4K (page size) clusters to get 1/4 each because these are the most heavily used mbuf sizes. 2K clusters are used for MTU 1500 ethernet inbound packets. 4K clusters are used whenever possible for sends on sockets and thus outbound packets. The larger cluster sizes of 9K and 16K are limited to 1/6 of the overall mbuf memory limit. When jumbo MTU's are used these large clusters will end up only on the inbound path. They are not used on outbound, there it's still 4K. Yes, that will stay that way because otherwise we run into lots of complications in the stack. And it really isn't a problem, so don't make a scene. Normal mbufs (256B) weren't limited at all previously. This was problematic as there are certain places in the kernel that on allocation failure of clusters try to piece together their packet from smaller mbufs. The mbuf limit is the number of all other mbuf sizes together plus some more to allow for standalone mbufs (ACK for example) and to send off a copy of a cluster. Unfortunately there isn't a way to set an overall limit for all mbuf memory together as UMA doesn't support such a limiting. NB: Every cluster also has an mbuf associated with it. Two examples on the revised mbuf sizing limits: 1GB KVM: 512MB limit for mbufs 419,430 mbufs 65,536 2K mbuf clusters 32,768 4K mbuf clusters 9,709 9K mbuf clusters 5,461 16K mbuf clusters 16GB RAM: 8GB limit for mbufs 33,554,432 mbufs 1,048,576 2K mbuf clusters 524,288 4K mbuf clusters 155,344 9K mbuf clusters 87,381 16K mbuf clusters These defaults should be sufficient for even the most demanding network loads. MFC after: 1 month |
/freebsd-11.0-release/sys/kern/ | ||
H A D | kern_mbuf.c | diff 243631 Tue Nov 27 21:36:13 MST 2012 andre Base the mbuf related limits on the available physical memory or kernel memory, whichever is lower. The overall mbuf related memory limit must be set so that mbufs (and clusters of various sizes) can't exhaust physical RAM or KVM. The limit is set to half of the physical RAM or KVM (whichever is lower) as the baseline. In any normal scenario we want to leave at least half of the physmem/kvm for other kernel functions and userspace to prevent it from swapping too easily. Via a tunable kern.maxmbufmem the limit can be upped to at most 3/4 of physmem/kvm. At the same time divorce maxfiles from maxusers and set maxfiles to physpages / 8 with a floor based on maxusers. This way busy servers can make use of the significantly increased mbuf limits with a much larger number of open sockets. Tidy up ordering in init_param2() and check up on some users of those values calculated here. Out of the overall mbuf memory limit 2K clusters and 4K (page size) clusters to get 1/4 each because these are the most heavily used mbuf sizes. 2K clusters are used for MTU 1500 ethernet inbound packets. 4K clusters are used whenever possible for sends on sockets and thus outbound packets. The larger cluster sizes of 9K and 16K are limited to 1/6 of the overall mbuf memory limit. When jumbo MTU's are used these large clusters will end up only on the inbound path. They are not used on outbound, there it's still 4K. Yes, that will stay that way because otherwise we run into lots of complications in the stack. And it really isn't a problem, so don't make a scene. Normal mbufs (256B) weren't limited at all previously. This was problematic as there are certain places in the kernel that on allocation failure of clusters try to piece together their packet from smaller mbufs. The mbuf limit is the number of all other mbuf sizes together plus some more to allow for standalone mbufs (ACK for example) and to send off a copy of a cluster. Unfortunately there isn't a way to set an overall limit for all mbuf memory together as UMA doesn't support such a limiting. NB: Every cluster also has an mbuf associated with it. Two examples on the revised mbuf sizing limits: 1GB KVM: 512MB limit for mbufs 419,430 mbufs 65,536 2K mbuf clusters 32,768 4K mbuf clusters 9,709 9K mbuf clusters 5,461 16K mbuf clusters 16GB RAM: 8GB limit for mbufs 33,554,432 mbufs 1,048,576 2K mbuf clusters 524,288 4K mbuf clusters 155,344 9K mbuf clusters 87,381 16K mbuf clusters These defaults should be sufficient for even the most demanding network loads. MFC after: 1 month |
H A D | subr_param.c | diff 243631 Tue Nov 27 21:36:13 MST 2012 andre Base the mbuf related limits on the available physical memory or kernel memory, whichever is lower. The overall mbuf related memory limit must be set so that mbufs (and clusters of various sizes) can't exhaust physical RAM or KVM. The limit is set to half of the physical RAM or KVM (whichever is lower) as the baseline. In any normal scenario we want to leave at least half of the physmem/kvm for other kernel functions and userspace to prevent it from swapping too easily. Via a tunable kern.maxmbufmem the limit can be upped to at most 3/4 of physmem/kvm. At the same time divorce maxfiles from maxusers and set maxfiles to physpages / 8 with a floor based on maxusers. This way busy servers can make use of the significantly increased mbuf limits with a much larger number of open sockets. Tidy up ordering in init_param2() and check up on some users of those values calculated here. Out of the overall mbuf memory limit 2K clusters and 4K (page size) clusters to get 1/4 each because these are the most heavily used mbuf sizes. 2K clusters are used for MTU 1500 ethernet inbound packets. 4K clusters are used whenever possible for sends on sockets and thus outbound packets. The larger cluster sizes of 9K and 16K are limited to 1/6 of the overall mbuf memory limit. When jumbo MTU's are used these large clusters will end up only on the inbound path. They are not used on outbound, there it's still 4K. Yes, that will stay that way because otherwise we run into lots of complications in the stack. And it really isn't a problem, so don't make a scene. Normal mbufs (256B) weren't limited at all previously. This was problematic as there are certain places in the kernel that on allocation failure of clusters try to piece together their packet from smaller mbufs. The mbuf limit is the number of all other mbuf sizes together plus some more to allow for standalone mbufs (ACK for example) and to send off a copy of a cluster. Unfortunately there isn't a way to set an overall limit for all mbuf memory together as UMA doesn't support such a limiting. NB: Every cluster also has an mbuf associated with it. Two examples on the revised mbuf sizing limits: 1GB KVM: 512MB limit for mbufs 419,430 mbufs 65,536 2K mbuf clusters 32,768 4K mbuf clusters 9,709 9K mbuf clusters 5,461 16K mbuf clusters 16GB RAM: 8GB limit for mbufs 33,554,432 mbufs 1,048,576 2K mbuf clusters 524,288 4K mbuf clusters 155,344 9K mbuf clusters 87,381 16K mbuf clusters These defaults should be sufficient for even the most demanding network loads. MFC after: 1 month |
H A D | uipc_socket.c | diff 243631 Tue Nov 27 21:36:13 MST 2012 andre Base the mbuf related limits on the available physical memory or kernel memory, whichever is lower. The overall mbuf related memory limit must be set so that mbufs (and clusters of various sizes) can't exhaust physical RAM or KVM. The limit is set to half of the physical RAM or KVM (whichever is lower) as the baseline. In any normal scenario we want to leave at least half of the physmem/kvm for other kernel functions and userspace to prevent it from swapping too easily. Via a tunable kern.maxmbufmem the limit can be upped to at most 3/4 of physmem/kvm. At the same time divorce maxfiles from maxusers and set maxfiles to physpages / 8 with a floor based on maxusers. This way busy servers can make use of the significantly increased mbuf limits with a much larger number of open sockets. Tidy up ordering in init_param2() and check up on some users of those values calculated here. Out of the overall mbuf memory limit 2K clusters and 4K (page size) clusters to get 1/4 each because these are the most heavily used mbuf sizes. 2K clusters are used for MTU 1500 ethernet inbound packets. 4K clusters are used whenever possible for sends on sockets and thus outbound packets. The larger cluster sizes of 9K and 16K are limited to 1/6 of the overall mbuf memory limit. When jumbo MTU's are used these large clusters will end up only on the inbound path. They are not used on outbound, there it's still 4K. Yes, that will stay that way because otherwise we run into lots of complications in the stack. And it really isn't a problem, so don't make a scene. Normal mbufs (256B) weren't limited at all previously. This was problematic as there are certain places in the kernel that on allocation failure of clusters try to piece together their packet from smaller mbufs. The mbuf limit is the number of all other mbuf sizes together plus some more to allow for standalone mbufs (ACK for example) and to send off a copy of a cluster. Unfortunately there isn't a way to set an overall limit for all mbuf memory together as UMA doesn't support such a limiting. NB: Every cluster also has an mbuf associated with it. Two examples on the revised mbuf sizing limits: 1GB KVM: 512MB limit for mbufs 419,430 mbufs 65,536 2K mbuf clusters 32,768 4K mbuf clusters 9,709 9K mbuf clusters 5,461 16K mbuf clusters 16GB RAM: 8GB limit for mbufs 33,554,432 mbufs 1,048,576 2K mbuf clusters 524,288 4K mbuf clusters 155,344 9K mbuf clusters 87,381 16K mbuf clusters These defaults should be sufficient for even the most demanding network loads. MFC after: 1 month |
/freebsd-11.0-release/etc/ | ||
H A D | Makefile | diff 288 Fri Aug 13 06:11:18 MDT 1993 rgrimes Enable lastlog install commands. |
/freebsd-11.0-release/sys/dev/ath/ | ||
H A D | if_athvar.h | diff 237153 Sat Jun 16 04:47:20 MDT 2012 adrian Shuffle some more fields in ath_buf so it's not too big. This shaves off 20 bytes - from 288 bytes to 268 bytes. However, it's still too big. |
H A D | if_ath.c | diff 237153 Sat Jun 16 04:47:20 MDT 2012 adrian Shuffle some more fields in ath_buf so it's not too big. This shaves off 20 bytes - from 288 bytes to 268 bytes. However, it's still too big. |
Completed in 899 milliseconds