Searched refs:BIT_2 (Results 1 - 25 of 25) sorted by relevance

/linux-master/drivers/scsi/
H A Dqla1280.h19 #define BIT_2 0x4 macro
121 #define ISP_CFG0_1040 BIT_2 /* ISP1040 */
130 #define ISP_CFG1_BENAB BIT_2 /* Global Bus burst enable */
135 #define ISP_EN_RISC BIT_2 /* ISP enable RISC interrupts. */
140 #define RISC_INT BIT_2 /* RISC interrupt */
147 #define NV_DATA_OUT BIT_2
157 #define CDMA_CONF_RIRQ BIT_2 /* RISC interrupt enable */
174 #define DDMA_CONF_RIRQ BIT_2 /* RISC interrupt enable */
324 #define NV_START_BIT BIT_2
568 #define RF_BAD_HEADER BIT_2 /* Ba
[all...]
H A Dqla1280.c1116 mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;
1682 err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
1696 #define CMD_ARGS (BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
1700 #define CMD_ARGS (BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
1901 BIT_3 | BIT_2 | BIT_1 | BIT_0,
1915 BIT_3 | BIT_2 | BIT_1 | BIT_0,
2208 BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);
2242 status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
2249 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2263 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_
[all...]
/linux-master/drivers/scsi/qla2xxx/
H A Dqla_nvme.h64 #define CF_DATA_SEG_DESCR_ENABLE BIT_2
H A Dqla_fw.h497 #define CF_DATA_SEG_DESCR_ENABLE BIT_2
539 #define TMF_DSD_LIST_ENABLE BIT_2
973 #define TCF_CLEAR_TASK_SET BIT_2
1002 #define AOF_ABTS_TIMEOUT BIT_2 /* Disable logout on ABTS timeout. */
1194 #define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */
1257 #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2)
1261 #define GPDX_LED_YELLOW_ON BIT_2
1460 #define CS_VF_SET_HOPS_OF_VPORTS BIT_2
1751 #define FSTATE_IS_DIAG_FW BIT_2
1767 #define VCO_DONT_RESET_UPDATE BIT_2
[all...]
H A Dqla_def.h109 #define BIT_2 0x4 macro
231 #define IDC_NIC_FW_REPORTED_FAILURE BIT_2
418 #define SRB_CRC_CTX_DMA_VALID BIT_2 /* DIF: context DMA valid */
535 #define SRB_LOGIN_SKIP_PRLI BIT_2
585 #define SRB_FXDISC_REQ_DWRD_VALID BIT_2
841 #define NVR_DATA_OUT BIT_2
1100 #define IOCTL_CMD BIT_2
1113 #define IOCTL_CMD BIT_2
1421 #define MBX_2 BIT_2
1530 #define QLA_ZIO_MODE_6 (BIT_2 | BIT_
[all...]
H A Dqla_init.c1177 mb[1] = BIT_2 | BIT_3;
4342 (ha->fw_attributes & BIT_2)) {
4476 if (ha->fw_seriallink_options[3] & BIT_2) {
4480 swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0);
4484 (BIT_3 | BIT_2 | BIT_1 | BIT_0);
4502 (BIT_3 | BIT_2 | BIT_1 | BIT_0);
5255 nv->firmware_options[0] = BIT_2 | BIT_1;
5262 nv->firmware_options[0] = BIT_2 | BIT_1;
5289 nv->host_p[1] = BIT_2;
5310 nv->firmware_options[0] |= BIT_2;
[all...]
H A Dqla_target.h482 #define CTIO7_FLAGS_DSD_PTR BIT_2
842 TRC_DO_WORK_ERR = BIT_2,
H A Dqla_inline.h388 RESOURCE_FORCE = BIT_2,
H A Dqla_gbl.h998 #define QLA2XX_INT_ERR BIT_2
H A Dqla_mbx.c801 (BIT_0 | BIT_1 | BIT_2);
5753 mcp->mb[2] = BIT_2;
6344 if (subcode & BIT_2) {
6352 if (!(subcode & (BIT_2 | BIT_5)))
7017 if (options & BIT_2) {
H A Dqla_attr.c1392 options |= BIT_3|BIT_2|BIT_1;
1404 options |= BIT_2;
H A Dqla_os.c6189 if (sfp[0] & BIT_2 || sfp[1] & (BIT_6|BIT_5))
/linux-master/drivers/net/ethernet/qlogic/qlcnic/
H A Dqlcnic_ctx.c1348 arg1 &= ~(BIT_2 | BIT_3);
1354 arg2 |= (BIT_2 | BIT_3);
1364 arg2 &= ~(BIT_1 | BIT_2 | BIT_3);
1366 arg2 &= ~BIT_2;
1367 if (!(esw_cfg->offload_flags & BIT_2))
1372 arg1 |= (BIT_2 | BIT_5);
H A Dqlcnic_hdr.h197 #define BIT_2 0x4 macro
494 #define TA_CTL_WRITE BIT_2
H A Dqlcnic_83xx_hw.c748 val = BIT_2 | ((adapter->ahw->num_msix - 1) << 8);
750 val = BIT_2;
2022 lro_bit_mask = (mode ? (BIT_0 | BIT_1 | BIT_2 | BIT_3) : 0);
3547 cmd.req.arg[1] = BIT_2 | (adapter->portnum << 16);
H A Dqlcnic.h921 #define QLCNIC_FW_CAPABILITY_2_LRO_MAX_TCP_SEG BIT_2
1316 #define QLCNIC_SWITCH_VLAN_FILTERING BIT_2
H A Dqlcnic_dcb.c551 if (mbx_out & BIT_2)
H A Dqlcnic_minidump.c25 #define QLCNIC_DUMP_ANDCRB BIT_2
H A Dqlcnic_hw.c1038 if (!(offload_flags & BIT_2))
H A Dqlcnic_sriov_common.c384 if (status & BIT_2)
H A Dqlcnic_83xx_init.c1023 #define QLC_83XX_MATCH_ENCAP_ID BIT_2
H A Dqlcnic_io.c365 #define QLCNIC_ENCAP_INNER_L3_IP6 BIT_2
H A Dqlcnic_main.c1501 esw_cfg.offload_flags |= (BIT_1 | BIT_2);
/linux-master/drivers/scsi/qla4xxx/
H A Dql4_def.h82 #define BIT_2 0x4 macro
H A Dql4_os.c3558 conn->tcp_timer_scale |= BIT_2;
3685 SET_BITVAL(conn->tcp_timer_scale & BIT_2, options, BIT_3);
3686 SET_BITVAL(conn->tcp_timer_scale & BIT_1, options, BIT_2);
3794 conn->tcp_timer_scale |= BIT_2;

Completed in 502 milliseconds