/u-boot/tools/binman/etype/ |
H A D | u_boot_dtb_with_ucode.py | 40 self.ready = False 92 self.ready = True 94 self.ready = True 95 return self.ready
|
H A D | u_boot_ucode.py | 86 if not fdt_entry.ready:
|
H A D | _testing.py | 68 # Set to True when the entry is ready to process the FDT. 156 ready = self.process_fdt_ready 159 return ready
|
/u-boot/arch/arm/mach-stm32mp/stm32mp1/ |
H A D | pwr_regulator.c | 30 u32 ready; member in struct:stm32mp_pwr_reg_info 115 .ready = STM32MP_PWR_CR3_REG11RDY, 121 .ready = STM32MP_PWR_CR3_REG18RDY, 127 .ready = STM32MP_PWR_CR3_USB33RDY, 251 /* waiting ready for enable */ 257 if (reg & p->ready)
|
/u-boot/net/ |
H A D | link_local.c | 61 static int ready; variable 95 /* poll, being ready to adjust current timeout */ 128 ready = 0; 184 ready = 1; 245 if (ready) 328 ready = 0;
|
/u-boot/include/xen/interface/ |
H A D | event_channel.h | 274 u32 ready; member in struct:evtchn_fifo_control_block
|
/u-boot/drivers/clk/at91/ |
H A D | clk-sam9x60-pll.c | 101 bool ready = sam9x60_pll_ready(base, pll->id); local 132 while (ready && !sam9x60_pll_ready(base, pll->id)) { 311 bool ready = sam9x60_pll_ready(base, pll->id); local 335 while (ready && !sam9x60_pll_ready(base, pll->id)) {
|
/u-boot/arch/x86/include/asm/ |
H A D | me_common.h | 155 u32 ready:1; member in struct:mei_csr
|
/u-boot/drivers/mtd/ |
H A D | cfi_flash.c | 665 int ready; local 684 ready = flash_read8(dst) == flash_read8(src); 687 ready = flash_read16(dst) == flash_read16(src); 690 ready = flash_read32(dst) == flash_read32(src); 693 ready = flash_read64(dst) == flash_read64(src); 696 ready = 0; 699 if (ready)
|
/u-boot/drivers/usb/musb-new/ |
H A D | musb_host.c | 349 int ready = qh->is_ready; local 370 qh->is_ready = ready; 590 WARNING("rx%d, packet/%d ready?\n", ep->epnum, 1128 dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr); 1197 dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr); 1466 dev_dbg(musb->controller, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val, 1627 /* if no errors, be sure a packet is ready for unloading */ 2228 int ready = qh->is_ready; local 2232 qh->is_ready = ready; 2237 if (ready [all...] |
/u-boot/include/linux/mtd/ |
H A D | spi-nor.h | 531 * @ready: [FLASH-SPECIFIC] check if the flash is ready 582 int (*ready)(struct spi_nor *nor); member in struct:spi_nor
|
/u-boot/drivers/mtd/nand/raw/ |
H A D | pxa3xx_nand.c | 666 unsigned int ready, cmd_done; local 670 ready = NDSR_FLASH_RDY; 673 ready = NDSR_RDY; 713 if (status & ready) { 1140 * Prepare the "is ready" completion before starting a command
|
/u-boot/drivers/clk/renesas/ |
H A D | r9a06g032-clocks.c | 54 * @ready: enables NoC forwarding of read/write requests to device, 55 * (eg. device is ready to handle read/write requests) 66 * Modules may also need to signal when the are @ready to 72 struct regbit gate, reset, ready, midle; member in struct:r9a06g032_gate 147 .ready = _rdy, \ 789 clk_rdesc_set(clocks, g->ready, on);
|
/u-boot/drivers/mtd/spi/ |
H A D | spi-nor-core.c | 822 if (nor->ready) 823 return nor->ready(nor); 829 * Service routine to read status register until ready, or timeout occurs. 3445 * For the multi-die package parts, the ready() hook is needed to check 3449 nor->ready = s25_s28_mdp_ready;
|