| /netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/mach-orion5x/ |
| H A D | mpp.h | 15 MPP_GPIO, enumerator in enum:orion5x_mpp_type
|
| H A D | rd88f5181l-fxo-setup.c | 68 { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */
69 { 1, MPP_GPIO }, /* PCI_intA */
70 { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/
71 { 3, MPP_GPIO }, /* FXS or DAA select */
72 { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */
73 { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */
76 { 8, MPP_GPIO }, /* CardBus reset */
77 { 9, MPP_GPIO }, /* GE_RXERR */
78 { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */
79 { 11, MPP_GPIO }, /* Lifelin
[all...] |
| H A D | rd88f5181l-ge-setup.c | 69 { 0, MPP_GPIO }, /* LED1 */
70 { 1, MPP_GPIO }, /* LED5 */
71 { 2, MPP_GPIO }, /* LED4 */
72 { 3, MPP_GPIO }, /* LED3 */
73 { 4, MPP_GPIO }, /* PCI_intA */
74 { 5, MPP_GPIO }, /* RTC interrupt */
77 { 8, MPP_GPIO }, /* 88e6131 interrupt */
78 { 9, MPP_GPIO }, /* GE_RXERR */
79 { 10, MPP_GPIO }, /* PCI_intB */
80 { 11, MPP_GPIO }, /* LED
[all...] |
| H A D | net2big-setup.c | 343 { 0, MPP_GPIO }, /* Raid mode (bit 0) */
344 { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
345 { 2, MPP_GPIO }, /* Raid mode (bit 1) */
346 { 3, MPP_GPIO }, /* Board ID (bit 0) */
347 { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */
348 { 5, MPP_GPIO }, /* Fan fail detection */
349 { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */
350 { 7, MPP_GPIO }, /* Disable initial blinking on front LED */
351 { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
352 { 9, MPP_GPIO }, /* Rea
[all...] |
| H A D | wnr854t-setup.c | 28 { 0, MPP_GPIO }, /* Power LED green (0=on) */
29 { 1, MPP_GPIO }, /* Reset Button (0=off) */
30 { 2, MPP_GPIO }, /* Power LED blink (0=off) */
31 { 3, MPP_GPIO }, /* WAN Status LED amber (0=off) */
32 { 4, MPP_GPIO }, /* PCI int */
33 { 5, MPP_GPIO }, /* ??? */
34 { 6, MPP_GPIO }, /* ??? */
35 { 7, MPP_GPIO }, /* ??? */
|
| H A D | d2net-setup.c | 271 { 0, MPP_GPIO }, /* Board ID (bit 0) */
272 { 1, MPP_GPIO }, /* Board ID (bit 1) */
273 { 2, MPP_GPIO }, /* Board ID (bit 2) */
274 { 3, MPP_GPIO }, /* SATA 0 power */
276 { 5, MPP_GPIO }, /* Fan fail detection */
277 { 6, MPP_GPIO }, /* Red front LED */
279 { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
280 { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
283 { 12, MPP_GPIO }, /* SATA 1 power */
287 { 16, MPP_GPIO }, /* Blu
[all...] |
| H A D | ls_hgl-setup.c | 204 { 0, MPP_GPIO }, /* LED_PWR */
205 { 1, MPP_GPIO }, /* HDD_PWR */
206 { 2, MPP_GPIO }, /* LED_ALARM */
207 { 3, MPP_GPIO }, /* LED_INFO */
210 { 6, MPP_GPIO }, /* FAN_LCK */
211 { 7, MPP_GPIO }, /* INIT */
212 { 8, MPP_GPIO }, /* POWER */
213 { 9, MPP_GPIO }, /* USB_PWR */
214 { 10, MPP_GPIO }, /* AUTO_POWER */
219 { 15, MPP_GPIO }, /* FUN
[all...] |
| H A D | mss2-setup.c | 197 { 0, MPP_GPIO }, /* Power LED */
198 { 1, MPP_GPIO }, /* Error LED */
200 { 3, MPP_GPIO }, /* RTC interrupt */
201 { 4, MPP_GPIO }, /* HDD ind. (Single/Dual)*/
202 { 5, MPP_GPIO }, /* HD0 5V control */
203 { 6, MPP_GPIO }, /* HD0 12V control */
204 { 7, MPP_GPIO }, /* HD1 5V control */
205 { 8, MPP_GPIO }, /* HD1 12V control */
207 { 10, MPP_GPIO }, /* Fan control */
208 { 11, MPP_GPIO }, /* Powe
[all...] |
| H A D | mv2120-setup.c | 112 { 0, MPP_GPIO }, /* Sys status LED */
113 { 1, MPP_GPIO }, /* Sys error LED */
114 { 2, MPP_GPIO }, /* OverTemp interrupt */
115 { 3, MPP_GPIO }, /* RTC interrupt */
116 { 4, MPP_GPIO }, /* V_LED 5V */
117 { 5, MPP_GPIO }, /* V_LED 3.3V */
120 { 8, MPP_GPIO }, /* SATA 0 fail LED */
121 { 9, MPP_GPIO }, /* SATA 1 fail LED */
129 { 17, MPP_GPIO }, /* Reset button */
130 { 18, MPP_GPIO }, /* Powe
[all...] |
| H A D | dns323-setup.c | 390 { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
391 { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
393 { 4, MPP_GPIO }, /* power button LED */
394 { 5, MPP_GPIO }, /* power button LED */
395 { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
396 { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
397 { 8, MPP_GPIO }, /* triggers power off */
398 { 9, MPP_GPIO }, /* power button switch */
399 { 10, MPP_GPIO }, /* reset button switch */
414 { 1, MPP_GPIO }, /* righ
[all...] |
| H A D | lsmini-setup.c | 206 { 1, MPP_GPIO }, /* HDD_PWR */
207 { 2, MPP_GPIO }, /* LED_ALARM */
208 { 3, MPP_GPIO }, /* LED_INFO */
214 { 9, MPP_GPIO }, /* LED_FUNC */
219 { 14, MPP_GPIO }, /* LED_PWR */
220 { 15, MPP_GPIO }, /* FUNC */
221 { 16, MPP_GPIO }, /* USB_PWR */
222 { 17, MPP_GPIO }, /* AUTO_POWER */
223 { 18, MPP_GPIO }, /* POWER */
224 { 19, MPP_GPIO }, /* HDD_PWR
[all...] |
| H A D | wrt350n-v2-setup.c | 105 { 0, MPP_GPIO }, /* Power LED green (0=on) */
106 { 1, MPP_GPIO }, /* Security LED (0=on) */
107 { 2, MPP_GPIO }, /* Internal Button (0=on) */
108 { 3, MPP_GPIO }, /* Reset Button (0=on) */
109 { 4, MPP_GPIO }, /* PCI int */
110 { 5, MPP_GPIO }, /* Power LED orange (0=on) */
111 { 6, MPP_GPIO }, /* USB LED (0=on) */
112 { 7, MPP_GPIO }, /* Wireless LED (0=on) */
|
| H A D | rd88f5182-setup.c | 245 { 0, MPP_GPIO }, /* Debug Led */
246 { 1, MPP_GPIO }, /* Reset Switch */
248 { 3, MPP_GPIO }, /* RTC Int */
249 { 4, MPP_GPIO },
250 { 5, MPP_GPIO },
251 { 6, MPP_GPIO }, /* PCI_intA */
252 { 7, MPP_GPIO }, /* PCI_intB */
|
| H A D | ts409-setup.c | 250 { 4, MPP_GPIO }, /* HDD 1 status */
251 { 5, MPP_GPIO }, /* HDD 2 status */
252 { 6, MPP_GPIO }, /* HDD 3 status */
253 { 7, MPP_GPIO }, /* HDD 4 status */
256 { 10, MPP_GPIO }, /* RTC int */
260 { 14, MPP_GPIO }, /* SW_RST */
261 { 15, MPP_GPIO }, /* USB copy button */
|
| H A D | db88f5281-setup.c | 302 { 0, MPP_GPIO }, /* USB Over Current */
303 { 1, MPP_GPIO }, /* USB Vbat input */
308 { 6, MPP_GPIO }, /* JP0, CON17.2 */
309 { 7, MPP_GPIO }, /* JP1, CON17.1 */
310 { 8, MPP_GPIO }, /* JP2, CON11.2 */
311 { 9, MPP_GPIO }, /* JP3, CON11.3 */
312 { 10, MPP_GPIO }, /* RTC int */
313 { 11, MPP_GPIO }, /* Baud Rate Generator */
314 { 12, MPP_GPIO }, /* PCI int 1 */
315 { 13, MPP_GPIO }, /* PC
[all...] |
| H A D | edmini_v2-setup.c | 187 { 3, MPP_GPIO }, /* RTC interrupt */
201 { 16, MPP_GPIO },
203 { 17, MPP_GPIO },
205 { 18, MPP_GPIO },
|
| H A D | ts209-setup.c | 249 { 1, MPP_GPIO }, /* USB copy button */
250 { 2, MPP_GPIO }, /* Load defaults button */
251 { 3, MPP_GPIO }, /* GPIO RTC */
254 { 6, MPP_GPIO }, /* PCI Int A */
255 { 7, MPP_GPIO }, /* PCI Int B */
266 { 18, MPP_GPIO }, /* SW_RST */
|
| H A D | ts78xx-setup.c | 491 { 1, MPP_GPIO }, /* JTAG Clock */
492 { 2, MPP_GPIO }, /* JTAG Data In */
493 { 3, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB2B */
494 { 4, MPP_GPIO }, /* JTAG Data Out */
495 { 5, MPP_GPIO }, /* JTAG TMS */
496 { 6, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */
497 { 7, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB22B */
|
| H A D | terastation_pro2-setup.c | 307 { 8, MPP_GPIO }, /* MICON int */
308 { 9, MPP_GPIO }, /* RTC int */
310 { 11, MPP_GPIO }, /* PCI Int A */
312 { 13, MPP_GPIO }, /* UPS on UART0 enable */
313 { 14, MPP_GPIO }, /* UPS low battery detection */
|
| H A D | mpp.c | 54 case MPP_GPIO:
162 orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
|
| H A D | kurobox_pro-setup.c | 321 { 2, MPP_GPIO }, /* GPIO Micon */
322 { 3, MPP_GPIO }, /* GPIO Rtc */
|