Searched refs:GPIO_GPIO (Results 1 - 25 of 38) sorted by relevance

12

/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/arch/arm/mach-sa1100/include/mach/
H A Dshannon.h7 #define SHANNON_GPIO_SPI_FLASH GPIO_GPIO (0) /* Output - Driven low, enables SPI to flash */
8 #define SHANNON_GPIO_SPI_DSP GPIO_GPIO (1) /* Output - Driven low, enables SPI to DSP */
10 #define SHANNON_GPIO_SPI_OUTPUT GPIO_GPIO (10) /* Output - SPI output to DSP */
11 #define SHANNON_GPIO_SPI_INPUT GPIO_GPIO (11) /* Input - SPI input from DSP */
12 #define SHANNON_GPIO_SPI_CLOCK GPIO_GPIO (12) /* Output - Clock for SPI */
13 #define SHANNON_GPIO_SPI_FRAME GPIO_GPIO (13) /* Output - Frame marker - not used */
14 #define SHANNON_GPIO_SPI_RTS GPIO_GPIO (14) /* Input - SPI Ready to Send */
16 #define SHANNON_GPIO_SPI_CTS GPIO_GPIO (15) /* Output - SPI Clear to Send */
17 #define SHANNON_GPIO_IRQ_CODEC GPIO_GPIO (16) /* in, irq from ucb1200 */
19 #define SHANNON_GPIO_DSP_RESET GPIO_GPIO (1
[all...]
H A Dcerf.h17 #define CERF_GPIO_CF_BVD2 GPIO_GPIO (19)
18 #define CERF_GPIO_CF_BVD1 GPIO_GPIO (20)
19 #define CERF_GPIO_CF_RESET GPIO_GPIO (21)
20 #define CERF_GPIO_CF_IRQ GPIO_GPIO (22)
21 #define CERF_GPIO_CF_CD GPIO_GPIO (23)
H A Dassabet.h89 #define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */
90 #define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */
91 #define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */
92 #define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */
93 #define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */
94 #define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */
95 #define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */
96 #define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */
97 #define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */
98 #define ASSABET_GPIO_RCLK GPIO_GPIO (2
[all...]
H A Dcollie.h53 #define _COLLIE_GPIO_ON_KEY GPIO_GPIO(0)
54 #define _COLLIE_GPIO_AC_IN GPIO_GPIO(1)
55 #define _COLLIE_GPIO_nREMOCON_INT GPIO_GPIO(15)
56 #define _COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO(16)
57 #define _COLLIE_GPIO_nMIC_ON GPIO_GPIO(17)
58 #define _COLLIE_GPIO_nREMOCON_ON GPIO_GPIO(18)
59 #define _COLLIE_GPIO_CO GPIO_GPIO(20)
60 #define _COLLIE_GPIO_WAKEUP GPIO_GPIO(24)
H A Dgpio.h34 return GPLR & GPIO_GPIO(gpio);
43 GPSR = GPIO_GPIO(gpio);
45 GPCR = GPIO_GPIO(gpio);
H A DSA-1100.h920 #define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
1135 #define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ macro
1137 #define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
1138 #define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
1139 #define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
1140 #define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
1141 #define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
1142 #define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
1143 #define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
1144 #define GPIO_GPIO7 GPIO_GPIO (
[all...]
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6.36/arch/arm/mach-sa1100/include/mach/
H A Dshannon.h7 #define SHANNON_GPIO_SPI_FLASH GPIO_GPIO (0) /* Output - Driven low, enables SPI to flash */
8 #define SHANNON_GPIO_SPI_DSP GPIO_GPIO (1) /* Output - Driven low, enables SPI to DSP */
10 #define SHANNON_GPIO_SPI_OUTPUT GPIO_GPIO (10) /* Output - SPI output to DSP */
11 #define SHANNON_GPIO_SPI_INPUT GPIO_GPIO (11) /* Input - SPI input from DSP */
12 #define SHANNON_GPIO_SPI_CLOCK GPIO_GPIO (12) /* Output - Clock for SPI */
13 #define SHANNON_GPIO_SPI_FRAME GPIO_GPIO (13) /* Output - Frame marker - not used */
14 #define SHANNON_GPIO_SPI_RTS GPIO_GPIO (14) /* Input - SPI Ready to Send */
16 #define SHANNON_GPIO_SPI_CTS GPIO_GPIO (15) /* Output - SPI Clear to Send */
17 #define SHANNON_GPIO_IRQ_CODEC GPIO_GPIO (16) /* in, irq from ucb1200 */
19 #define SHANNON_GPIO_DSP_RESET GPIO_GPIO (1
[all...]
H A Dcerf.h17 #define CERF_GPIO_CF_BVD2 GPIO_GPIO (19)
18 #define CERF_GPIO_CF_BVD1 GPIO_GPIO (20)
19 #define CERF_GPIO_CF_RESET GPIO_GPIO (21)
20 #define CERF_GPIO_CF_IRQ GPIO_GPIO (22)
21 #define CERF_GPIO_CF_CD GPIO_GPIO (23)
H A Dassabet.h89 #define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */
90 #define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */
91 #define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */
92 #define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */
93 #define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */
94 #define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */
95 #define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */
96 #define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */
97 #define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */
98 #define ASSABET_GPIO_RCLK GPIO_GPIO (2
[all...]
H A Dcollie.h53 #define _COLLIE_GPIO_ON_KEY GPIO_GPIO(0)
54 #define _COLLIE_GPIO_AC_IN GPIO_GPIO(1)
55 #define _COLLIE_GPIO_nREMOCON_INT GPIO_GPIO(15)
56 #define _COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO(16)
57 #define _COLLIE_GPIO_nMIC_ON GPIO_GPIO(17)
58 #define _COLLIE_GPIO_nREMOCON_ON GPIO_GPIO(18)
59 #define _COLLIE_GPIO_CO GPIO_GPIO(20)
60 #define _COLLIE_GPIO_WAKEUP GPIO_GPIO(24)
H A Dgpio.h34 return GPLR & GPIO_GPIO(gpio);
43 GPSR = GPIO_GPIO(gpio);
45 GPCR = GPIO_GPIO(gpio);
H A DSA-1100.h920 #define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
1135 #define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ macro
1137 #define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
1138 #define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
1139 #define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
1140 #define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
1141 #define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
1142 #define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
1143 #define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
1144 #define GPIO_GPIO7 GPIO_GPIO (
[all...]
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/arch/arm/mach-sa1100/
H A Dgpio.c20 return GPLR & GPIO_GPIO(offset);
26 GPSR = GPIO_GPIO(offset);
28 GPCR = GPIO_GPIO(offset);
36 GPDR &= ~GPIO_GPIO(offset);
47 GPDR |= GPIO_GPIO(offset);
H A Dleds-cerf.c21 #define LED_D0 GPIO_GPIO(0)
22 #define LED_D1 GPIO_GPIO(1)
23 #define LED_D2 GPIO_GPIO(2)
24 #define LED_D3 GPIO_GPIO(3)
H A Dleds-badge4.c27 #define LED_RED GPIO_GPIO(7)
28 #define LED_GREEN GPIO_GPIO(9)
H A Dpleb.c34 #define GPIO_ETH0_IRQ GPIO_GPIO(21)
35 #define GPIO_ETH0_EN GPIO_GPIO(26)
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6.36/arch/arm/mach-sa1100/
H A Dgpio.c20 return GPLR & GPIO_GPIO(offset);
26 GPSR = GPIO_GPIO(offset);
28 GPCR = GPIO_GPIO(offset);
36 GPDR &= ~GPIO_GPIO(offset);
47 GPDR |= GPIO_GPIO(offset);
H A Dleds-cerf.c21 #define LED_D0 GPIO_GPIO(0)
22 #define LED_D1 GPIO_GPIO(1)
23 #define LED_D2 GPIO_GPIO(2)
24 #define LED_D3 GPIO_GPIO(3)
H A Dleds-badge4.c27 #define LED_RED GPIO_GPIO(7)
28 #define LED_GREEN GPIO_GPIO(9)
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/arch/arm/mach-w90x900/
H A Dgpio.c32 #define GPIO_GPIO(Nb) (0x00000001 << (Nb)) macro
61 regval &= GPIO_GPIO(offset);
78 regval |= GPIO_GPIO(offset);
80 regval &= ~GPIO_GPIO(offset);
97 regval &= ~GPIO_GPIO(offset);
116 regval |= GPIO_GPIO(offset);
122 regval |= GPIO_GPIO(offset);
124 regval &= ~GPIO_GPIO(offset);
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6.36/arch/arm/mach-w90x900/
H A Dgpio.c32 #define GPIO_GPIO(Nb) (0x00000001 << (Nb)) macro
61 regval &= GPIO_GPIO(offset);
78 regval |= GPIO_GPIO(offset);
80 regval &= ~GPIO_GPIO(offset);
97 regval &= ~GPIO_GPIO(offset);
116 regval |= GPIO_GPIO(offset);
122 regval |= GPIO_GPIO(offset);
124 regval &= ~GPIO_GPIO(offset);
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/arch/arm/mach-imx/
H A Dmach-pca100.c71 SD2_CD | GPIO_GPIO | GPIO_IN,
108 OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
122 USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
160 GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
161 GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
162 GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
232 mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
242 mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
244 mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
246 mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OU
[all...]
H A Deukrea_mbimx27-baseboard.c363 mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
369 mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
376 mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
377 mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
379 mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
383 mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
/asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6.36/arch/arm/mach-imx/
H A Dmach-pca100.c71 SD2_CD | GPIO_GPIO | GPIO_IN,
108 OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
122 USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
160 GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
161 GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
162 GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
232 mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
242 mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
244 mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
246 mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OU
[all...]
H A Deukrea_mbimx27-baseboard.c363 mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
369 mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
376 mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
377 mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
379 mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
383 mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);

Completed in 392 milliseconds

12