Searched refs:PFX (Results 1 - 25 of 34) sorted by relevance

12

/asus-wl-520gu-7.0.1.45/src/linux/linux/drivers/char/
H A Dsc1200wdt.c47 #define PFX SC1200_MODULE_NAME ": " macro
70 static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER;
164 printk(KERN_INFO PFX "Watchdog enabled, timeout = %d min(s)", timeout);
241 printk(KERN_INFO PFX "Watchdog disabled\n");
244 printk(KERN_CRIT PFX "Unexpected close!, timeout = %d min(s)\n", timeout);
341 printk(KERN_ERR PFX "ISA PnP found device that could not be autoconfigured\n");
346 printk(KERN_ERR PFX "ISA PnP could not find io ports\n");
358 printk(KERN_DEBUG PFX "ISA PnP found device at io port %#x/%d\n", io, io_len);
383 printk(KERN_ERR PFX "io parameter must be specified\n");
389 printk(KERN_ERR PFX "Unabl
[all...]
H A Di810_rng.c41 #define PFX RNG_MODULE_NAME ": " macro
143 printk (KERN_INFO PFX "RNG h/w enabled\n");
145 printk (KERN_ERR PFX "Unable to enable the RNG\n");
170 printk (KERN_INFO PFX "RNG h/w disabled\n");
172 printk (KERN_ERR PFX "Unable to disable the RNG\n");
284 printk (KERN_ERR PFX "cannot register misc device\n");
291 printk (KERN_ERR PFX "cannot ioremap RNG Memory\n");
300 printk (KERN_ERR PFX "RNG not detected\n");
310 printk (KERN_ERR PFX "cannot disable RNG, aborting\n");
H A Damd7xx_tco.c39 #define PFX AMDTCO_MODULE_NAME ": " macro
55 static char banner[] __initdata = KERN_INFO PFX AMDTCO_MODULE_VER;
156 printk(KERN_INFO PFX "Watchdog enabled, timeout = %d/%d seconds",
225 printk(KERN_INFO PFX "Watchdog disabled\n");
228 printk(KERN_CRIT PFX "Unexpected close!, timeout in %d seconds)\n", timeout);
318 printk(KERN_ERR PFX "Unable to register reboot notifier err = %d\n", ret);
323 printk(KERN_ERR PFX "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
331 printk (KERN_ERR PFX "power management base not set\n");
H A Dmachzwd.c117 #define PFX "machzwd" macro
156 # define dprintk(format, args...) printk(KERN_DEBUG PFX; ":" __FUNCTION__ ":%d: " format, __LINE__ , ## args)
238 printk(KERN_INFO PFX ": Watchdog timer is now disabled\n");
270 printk(KERN_INFO PFX ": Watchdog timer is now enabled\n");
303 printk(KERN_CRIT PFX ": I will reset your machine\n");
421 printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n");
481 printk(KERN_INFO PFX ": Watchdog using action = %s\n", str[act]);
488 printk(KERN_INFO PFX ": MachZ ZF-Logic Watchdog driver initializing.\n");
493 printk(KERN_WARNING PFX ": no ZF-Logic found\n");
H A Damd768_rng.c43 #define PFX RNG_MODULE_NAME ": " macro
196 printk (KERN_ERR PFX "cannot register misc device\n");
207 printk (KERN_ERR PFX "power management base not set\n");
220 printk(KERN_INFO PFX "AMD768 system management I/O registers at 0x%X.\n", pmbase);
H A Dwdt_pci.c63 #define PFX "wdt_pci: " macro
438 printk(KERN_CRIT PFX "Unexpected close, not stopping timer!");
525 printk (KERN_ERR PFX
542 printk (KERN_ERR PFX "I/O %d is not free.\n", io);
548 printk (KERN_ERR PFX "IRQ %d is not free.\n", irq);
554 printk (KERN_ERR PFX "can't misc_register on minor=%d\n", WATCHDOG_MINOR);
560 printk (KERN_ERR PFX "can't misc_register on minor=%d\n", WATCHDOG_MINOR);
566 printk (KERN_ERR PFX "can't misc_register (temp) on minor=%d\n", TEMP_MINOR);
H A Dau1000_ts.c53 #define PFX TS_NAME macro
57 #define dbg(format, arg...) printk(KERN_DEBUG PFX ": " format "\n" , ## arg)
61 #define err(format, arg...) printk(KERN_ERR PFX ": " format "\n" , ## arg)
62 #define info(format, arg...) printk(KERN_INFO PFX ": " format "\n" , ## arg)
63 #define warn(format, arg...) printk(KERN_WARNING PFX ": " format "\n" , ## arg)
/asus-wl-520gu-7.0.1.45/src/linux/linux/arch/ia64/hp/zx1/
H A Dhpzx1_misc.c22 #define PFX "hpzx1: " macro
106 printk(KERN_ERR PFX "No memory for %s (0x%p) sysdata\n", name,
114 printk(KERN_ERR PFX "No memory for %s (0x%p) sysdata\n", name,
134 printk(KERN_ERR PFX "No host bus 0x%02x for %s (0x%p)\n",
146 printk(KERN_ERR PFX "No space for %s (0x%p) on bus 0x%02x\n",
155 printk(KERN_ERR PFX "No memory for %s (0x%p)\n", name,
179 printk(KERN_INFO PFX "%s at 0x%lx; pci dev %s\n", name, addr,
225 printk(KERN_WARNING PFX "evaluate _BBN fail=0x%x\n", status);
/asus-wl-520gu-7.0.1.45/src/linux/linux/drivers/sound/
H A Dopl3sa2.c75 #define PFX OPL3SA2_MODULE_NAME ": " macro
620 printk(KERN_ERR PFX "MSS mixer not installed?\n");
642 printk(KERN_ERR PFX "Control I/O port %#x not free\n",
655 printk(KERN_ERR PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
668 PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
681 printk(KERN_DEBUG PFX "chipset version = %#x\n", version);
686 PFX "Unknown Yamaha audio controller version\n");
691 printk(KERN_INFO PFX "Found OPL3-SA2 (YMF711)\n");
697 PFX "Found OPL3-SA3 (YMF715 or YMF719)\n");
703 PFX "Foun
[all...]
H A Dforte.c59 #define PFX DRIVER_NAME ": " macro
250 printk (KERN_ERR PFX "ac97_read: Serial bus busy\n");
258 printk (KERN_ERR PFX "ac97_read: Bus busy reading reg 0x%x\n",
265 printk (KERN_ERR PFX "ac97_read: Invalid data port");
294 printk (KERN_ERR PFX "ac97_write: Serial bus busy\n");
303 printk (KERN_ERR PFX "ac97_write: Bus busy after write\n");
1818 printk (KERN_INFO PFX "Multi-channel device detected.\n");
1833 printk (KERN_INFO PFX "AC97 codec not responding");
1865 printk (KERN_ERR PFX "codec probe failed\n");
1873 printk (KERN_ERR PFX "could
[all...]
H A Dharmony.c43 #define PFX "harmony: " macro
224 DPRINTK(KERN_INFO PFX "consistent memory: 0x%lx, played_buf: 0x%lx\n",
231 printk(KERN_ERR PFX "couldn't allocate memory\n");
649 DPRINTK(KERN_WARNING PFX
827 printk(KERN_ERR PFX "Error requesting irq %d.\n", harmony.irq);
833 printk(KERN_ERR PFX "Error registering dsp\n");
1164 printk(KERN_WARNING PFX "Error Registering Mixer Driver\n");
1190 printk(KERN_ERR PFX "driver already registered\n");
1199 printk(KERN_ERR PFX "no irq found\n");
1206 printk(KERN_WARNING PFX "wron
[all...]
H A Dvia82cxxx_audio.c74 #define PFX VIA_MODULE_NAME ": " macro
600 printk (KERN_WARNING PFX "Codec rate locked at 48Khz\n");
720 printk (KERN_ERR PFX "DMA table alloc fail, aborting\n");
785 printk (KERN_ERR PFX "DMA buffer alloc fail, aborting\n");
1044 printk (KERN_WARNING PFX "unknown number of channels\n");
1234 printk (KERN_WARNING PFX "timeout waiting on AC97 codec\n");
1282 printk (KERN_WARNING PFX "timeout while reading AC97 codec (0x%lX)\n", data);
1345 printk (KERN_WARNING PFX "timeout after AC97 codec write (0x%X, 0x%X)\n", reg, value);
1536 printk (KERN_ERR PFX "unable to register AC97 mixer, aborting\n");
1543 printk (KERN_ERR PFX "unabl
[all...]
H A Dnec_vrc5477.c174 #define PFX VRC5477_AC97_MODULE_NAME ": " macro
723 printk(KERN_INFO PFX "adc overrun\n");
1357 printk(KERN_INFO PFX "ioctl %s\n", ioctl_str[count].str);
1359 printk(KERN_INFO PFX "ioctl unknown, 0x%x\n", cmd);
1831 printk(KERN_ERR PFX "alloc of device struct failed\n");
1859 printk(KERN_ERR PFX "no ac97 codec\n");
1866 printk(KERN_ERR PFX "io ports %#lx->%#lx in use\n",
1872 printk(KERN_ERR PFX "irq %u in use\n", s->irq);
1876 printk(KERN_INFO PFX "IO at %#lx, IRQ %d\n", s->io, s->irq);
1921 printk(KERN_INFO PFX "VR
[all...]
H A Des1371.c378 #define PFX ES1371_MODULE_NAME ": " macro
507 printk(KERN_DEBUG PFX "sample rate converter timeout r = 0x%08x\n", r);
1125 static const char invalid_magic[] = KERN_CRIT PFX "invalid magic value\n";
1284 DBG(printk(KERN_DEBUG PFX "dac1 dma timed out??\n");)
1319 DBG(printk(KERN_DEBUG PFX "dac2 dma timed out??\n");)
2663 printk(KERN_DEBUG PFX "midi timed out??\n");
2813 printk(KERN_WARNING PFX "out of memory\n");
2836 printk(KERN_INFO PFX "found chip, vendor id 0x%04x device id 0x%04x revision 0x%02x\n",
2839 printk(KERN_ERR PFX "io ports %#lx-%#lx in use\n", s->io, s->io+ES1371_EXTENT-1);
2844 printk(KERN_ERR PFX "ir
[all...]
H A Dmaestro3.c161 #define PFX M3_MODULE_NAME ": " macro
184 #define DPRINTK(DP, args...) {if (debug >= (DP)) printk(KERN_DEBUG PFX args);}
1271 static const char invalid_magic[] = KERN_CRIT PFX "invalid magic value in %s\n";
2103 printk(KERN_ERR PFX "serial bus busy reading reg 0x%x\n",reg);
2110 printk(KERN_ERR PFX "serial bus busy finishing read reg 0x%x\n",reg);
2129 printk(KERN_ERR PFX "serial bus busy writing 0x%x to 0x%x\n",val, reg);
2297 printk(KERN_ERR PFX "codec probe failed\n");
2303 printk(KERN_ERR PFX "couldn't register mixer!\n");
2425 printk(KERN_ERR PFX "no memory for %d bytes at ind %d (addr 0x%x)\n",
2593 printk(KERN_ERR PFX "architectur
[all...]
/asus-wl-520gu-7.0.1.45/src/linux/linux/drivers/video/riva/
H A Dfbdev.c86 #define PFX "rivafb: " macro
1023 printk(KERN_WARNING PFX
1031 printk(KERN_ERR PFX
1039 printk(KERN_INFO PFX
1045 printk(KERN_WARNING PFX
1051 printk(KERN_WARNING PFX
1056 printk(KERN_ERR PFX
1065 printk(KERN_WARNING PFX
1072 printk(KERN_ERR PFX
1078 printk(KERN_ERR PFX
[all...]
/asus-wl-520gu-7.0.1.45/src/linux/linux/drivers/char/agp/
H A Dagpgart_be.c105 panic(PFX "timed out waiting for the other CPUs!\n");
864 printk(KERN_WARNING PFX "i810 is disabled\n");
899 printk(KERN_INFO PFX "detected 4MB dedicated video ram.\n");
1135 printk(KERN_INFO PFX "detected %dK stolen memory.\n",gtt_entries / KB(1));
1139 printk(KERN_INFO PFX "detected %dK stolen memory.\n",gtt_entries / KB(1));
1143 printk(KERN_INFO PFX "detected %dK stolen memory.\n",gtt_entries / KB(1));
1148 printk(KERN_INFO PFX "detected %dK local memory.\n",gtt_entries / KB(1));
1151 printk(KERN_INFO PFX "no video memory detected.\n");
4049 printk(KERN_INFO PFX "HP ZX1 IOC: IOPDIR shared with sba_iommu\n");
4064 printk(KERN_ERR PFX "Invali
[all...]
/asus-wl-520gu-7.0.1.45/src/linux/linux/drivers/net/
H A Dne2k-pci.c76 #define PFX DRV_NAME ": " macro
234 printk (KERN_ERR PFX "no I/O resource at PCI BAR #0\n");
239 printk (KERN_ERR PFX "I/O resource 0x%x @ 0x%lx busy\n",
265 printk (KERN_ERR PFX "cannot allocate ethernet device\n");
282 printk(KERN_ERR PFX "Card failure (no reset ack).\n");
H A Dsungem.c103 #define PFX GEM_MODULE_NAME ": " macro
857 printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
2043 printk(KERN_ERR PFX "RIO GEM lacks MII phy, mif_cfg[%08x]\n",
2075 printk(KERN_ERR PFX "RIO MII phy will not respond.\n");
2090 printk(KERN_ERR PFX "GEM has bogus fifo sizes tx(%d) rx(%d)\n",
2098 printk(KERN_ERR PFX "RIO GEM has bogus fifo sizes tx(%d) rx(%d)\n",
2836 printk(KERN_ERR PFX "Cannot enable MMIO operation, "
2858 printk(KERN_ERR PFX "No usable DMA configuration, "
2869 printk(KERN_ERR PFX "Cannot find proper PCI device "
2876 printk(KERN_ERR PFX "Etherde
[all...]
H A D8139too.c117 #define PFX DRV_NAME ": " macro
767 printk (KERN_ERR PFX "%s: Unable to alloc new net device\n", pdev->slot_name);
797 printk (KERN_ERR PFX "%s: region #0 not a PIO resource, aborting\n", pdev->slot_name);
803 printk (KERN_ERR PFX "%s: Invalid PCI I/O region size(s), aborting\n", pdev->slot_name);
810 printk (KERN_ERR PFX "%s: region #1 not an MMIO resource, aborting\n", pdev->slot_name);
815 printk (KERN_ERR PFX "%s: Invalid PCI mem region size(s), aborting\n", pdev->slot_name);
837 printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pdev->slot_name);
851 printk (KERN_ERR PFX "%s: Chip not responding, ignoring board\n",
866 printk (KERN_DEBUG PFX "%s: unknown chip version, assuming RTL-8139\n",
868 printk (KERN_DEBUG PFX "
[all...]
H A Dpci-skeleton.c105 #define PFX MODNAME ": " macro
608 printk (KERN_ERR PFX "unable to alloc new ethernet\n");
637 printk (KERN_ERR PFX "region #0 not a PIO resource, aborting\n");
644 printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n");
652 printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n");
669 printk (KERN_ERR PFX "cannot remap MMIO, aborting\n");
705 printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8139\n",
707 printk (KERN_DEBUG PFX "PCI device %s: TxConfig = 0x%lx\n", pdev->slot_name, NETDRV_R32 (TxConfig));
1505 printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
H A Dpcnet32.c27 #define PFX DRV_NAME ": " macro
410 printk(KERN_ERR PFX "failed to enable device -- err=%d\n", err);
417 printk (KERN_ERR PFX "card has no PCI IO resources, aborting\n");
422 printk(KERN_ERR PFX "architecture does not support 32bit PCI busmaster DMA\n");
512 printk(KERN_DEBUG PFX "media reset to %#x.\n", media);
520 printk(KERN_INFO PFX "PCnet version %#x, no PCnet32 chip.\n",
544 printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
645 printk(KERN_ERR PFX "No access methods\n");
1657 printk(KERN_INFO PFX "%d cards_found.\n", cards_found);
H A D8139cp.c106 #define PFX DRV_NAME ": " macro
766 printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
1782 printk(KERN_ERR PFX "pci dev %s (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
1784 printk(KERN_ERR PFX "Try the \"8139too\" driver instead.\n");
1816 printk(KERN_ERR PFX "invalid irq (%d) for pci dev %s\n",
1823 printk(KERN_ERR PFX "no MMIO resource for pci dev %s\n",
1829 printk(KERN_ERR PFX "MMIO resource (%lx) too small on pci dev %s\n",
1840 printk(KERN_ERR PFX "No usable DMA configuration, "
1850 printk(KERN_ERR PFX "Cannot map PCI MMIO (%lx@%lx) on pci dev %s\n",
H A Dtg3.c60 #define PFX DRV_MODULE_NAME ": " macro
459 printk(KERN_WARNING PFX "%s: Invalid power state (%d) "
611 printk(KERN_INFO PFX "%s: Link is down.\n", tp->dev->name);
613 printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
622 printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
2138 printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
2174 printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
2394 printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
2572 printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
3060 printk(KERN_ERR PFX "tg3_stop_bloc
[all...]
/asus-wl-520gu-7.0.1.45/src/linux/linux/arch/ia64/hp/common/
H A Dsba_iommu.c40 #define PFX "IOC: " macro
1409 panic(PFX "Couldn't allocate I/O Page Table\n");
1445 panic(PFX "Unsupported system page size %d",
1494 panic(PFX "Couldn't allocate resource map\n");
1523 panic(PFX "Couldn't allocate struct pci_dev");
1528 panic(PFX "Couldn't allocate struct pci_controller");
1541 panic(PFX "IOC 2.0 or later required for IOMMU support\n");
1595 printk(KERN_INFO PFX

Completed in 308 milliseconds

12