Searched refs:x80 (Results 226 - 250 of 4962) sorted by relevance

1234567891011>>

/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/m68k/include/asm/
H A Datafdreg.h10 #define FDCSELREG_STP (0x80) /* command/status register */
30 #define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */
53 #define FDCSTAT_MOTORON (0x80) /* motor on */
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/sound/pci/oxygen/
H A Dcs2000.h22 #define CS2000_UNLOCK 0x80
32 #define CS2000_R_MOD_SEL_1_2 0x80
57 #define CS2000_CLK_SKIP_EN 0x80
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/sound/pcmcia/vx/
H A Dvxpocket.h57 #define VXP_CDSP_CLOCKIN_SEL_MASK 0x80 /* 0 (internal), 1 (AES/EBU) */
79 #define VXP_DLG_XILINX_REPROG_MASK 0x80 /* W */
80 #define VXP_DLG_DATA_XICOR_MASK 0x80 /* R */
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/include/pcmcia/
H A Dcisreg.h41 #define COR_SOFT_RESET 0x80
52 #define CCSR_CHANGED 0x80
64 #define PRR_BVD1_EVENT 0x80
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/include/linux/mmc/
H A Dsdio.h104 #define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */
115 #define SDIO_CCCR_CAP_4BLS 0x80 /* 4 bit low speed card */
146 #define SDIO_FBR_ENABLE_CSA 0x80 /* enable Code Storage Area */
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/iserver/libiconv-1.10/lib/
H A Diso2022_cn.h97 if (s[2] < 0x80 && s[3] < 0x80) {
132 if (c < 0x80) {
148 if (s[0] < 0x80 && s[1] < 0x80) {
191 if (buf[0] < 0x80) {
214 if (buf[0] < 0x80 && buf[1] < 0x80) {
244 if (buf[0] == 1 && buf[1] < 0x80 && buf[2] < 0x80) {
[all...]
H A Diso2022_jp1.h93 if (c < 0x80) {
103 if (c < 0x80) {
115 if (s[0] < 0x80 && s[1] < 0x80) {
127 if (s[0] < 0x80 && s[1] < 0x80) {
155 if (buf[0] < 0x80) {
176 if (buf[0] < 0x80) {
197 if (buf[0] < 0x80 && buf[1] < 0x80) {
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/timemachine/libiconv-1.11/lib/
H A Diso2022_cn.h97 if (s[2] < 0x80 && s[3] < 0x80) {
132 if (c < 0x80) {
148 if (s[0] < 0x80 && s[1] < 0x80) {
191 if (buf[0] < 0x80) {
214 if (buf[0] < 0x80 && buf[1] < 0x80) {
244 if (buf[0] == 1 && buf[1] < 0x80 && buf[2] < 0x80) {
[all...]
H A Diso2022_jp1.h93 if (c < 0x80) {
103 if (c < 0x80) {
115 if (s[0] < 0x80 && s[1] < 0x80) {
127 if (s[0] < 0x80 && s[1] < 0x80) {
155 if (buf[0] < 0x80) {
176 if (buf[0] < 0x80) {
197 if (buf[0] < 0x80 && buf[1] < 0x80) {
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/openssl-1.0.2h/crypto/sha/asm/
H A Dsha256-mb-x86_64.pl272 lea 0x80($ctx),$ctx # size optimization
293 movdqu 0x00-0x80($ctx),$A # load context
295 movdqu 0x20-0x80($ctx),$B
296 movdqu 0x40-0x80($ctx),$C
297 movdqu 0x60-0x80($ctx),$D
298 movdqu 0x80-0x80($ctx),$E
299 movdqu 0xa0-0x80($ctx),$F
300 movdqu 0xc0-0x80($ctx),$G
301 movdqu 0xe0-0x80(
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/openssl/crypto/sha/asm/
H A Dsha256-mb-x86_64.pl272 lea 0x80($ctx),$ctx # size optimization
293 movdqu 0x00-0x80($ctx),$A # load context
295 movdqu 0x20-0x80($ctx),$B
296 movdqu 0x40-0x80($ctx),$C
297 movdqu 0x60-0x80($ctx),$D
298 movdqu 0x80-0x80($ctx),$E
299 movdqu 0xa0-0x80($ctx),$F
300 movdqu 0xc0-0x80($ctx),$G
301 movdqu 0xe0-0x80(
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/include/linux/
H A Dsc26198.h93 #define MR2 0x80
144 #define MR0_SWFT 0x80
163 #define MR1_AUTORTS 0x80
180 #define MR2_MODELOOP 0x80
264 #define SR_RXBREAK 0x80
279 #define IR_IOPORT 0x80
303 #define BRGCTCR_ENABCLK1 0x80
353 #define XISR_RXXOFFGOT 0x80
363 #define CIR_TYPERXGOOD 0x80
366 #define CIR_RXDATA 0x80
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/mtd/nand/
H A Dr852.h36 #define R852_CTL_WRITE 0x80 /* set when performing writes (#WP) */
45 #define R852_CARD_STA_BUSY 0x80 /* card is busy - (#R/B) */
55 #define R852_CARD_IRQ_GENABLE 0x80 /* general enable */
63 #define R852_HW_UNKNOWN 0x80
71 #define R852_DMA2 0x80 /* if set w/bit #6, dma is supported */
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/
H A Dde620.h33 #define W_RSA 0x80 /* DIC write Remote Start Addr 1 */
36 #define EMPTY 0x80 /* 1 = receive buffer empty */
67 #define EEDI 0x80 /* EEPM DO pin */
89 #define TESTON 0x80 /* test host data transfer reliability */
101 #define JABBER 0x80 /* generate jabber condition */
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/minidlna/flac-1.2.1/src/libFLAC/
H A Dformat.c319 if ((utf8[0] & 0x80) == 0) {
322 else if ((utf8[0] & 0xE0) == 0xC0 && (utf8[1] & 0xC0) == 0x80) {
327 else if ((utf8[0] & 0xF0) == 0xE0 && (utf8[1] & 0xC0) == 0x80 && (utf8[2] & 0xC0) == 0x80) {
328 if (utf8[0] == 0xE0 && (utf8[1] & 0xE0) == 0x80) /* overlong sequence check */
337 else if ((utf8[0] & 0xF8) == 0xF0 && (utf8[1] & 0xC0) == 0x80 && (utf8[2] & 0xC0) == 0x80 && (utf8[3] & 0xC0) == 0x80) {
338 if (utf8[0] == 0xF0 && (utf8[1] & 0xF0) == 0x80) /* overlong sequence check */
342 else if ((utf8[0] & 0xFC) == 0xF8 && (utf8[1] & 0xC0) == 0x80
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/scripts/
H A Dexport_report.pl37 print "~"x80 , "\n";
135 printf("%s\n\n\n","x"x80);
139 printf("%s\n\n\n","x"x80);
156 printf("%s\n\n\n","x"x80);
162 print "~"x80 , "\n";
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/sound/oss/
H A Dopl3_hw.h49 #define IRQ_RESET 0x80
68 #define COMPOSITE_SINE_WAVE_MODE 0x80 /* Don't use with OPL-3? */
72 #define TREMOLO_DEPTH 0x80
88 #define TREMOLO_ON 0x80
109 * Sustain level / Release rate (0x80 to 0x95)
111 #define SUSTAIN_RELEASE 0x80
/netgear-R7000-V1.0.7.12_1.2.5/src/include/
H A Dpcicfg.h220 PCI_DASDI_OTHER = 0x80
228 PCI_NET_OTHER = 0x80
235 PCI_DISPLAY_OTHER = 0x80
242 PCI_MEDIA_OTHER = 0x80
248 PCI_MEMORY_OTHER = 0x80
261 PCI_BRIDGE_OTHER = 0x80
269 PCI_COMM_OTHER = 0x80
278 PCI_BASE_OTHER = 0x80
287 PCI_INPUT_OTHER = 0x80
292 PCI_DOCK_OTHER = 0x80
[all...]
H A Dsbsdio.h81 #define SROM_OTP 0x80 /* OTP present */
98 #define SBSDIO_MESBUSYCTRL_ENAB 0x80 /* Enable busy capability for MES access */
126 #define SBSDIO_HT_AVAIL 0x80 /* Status: HT is ready */
129 #define SBSDIO_Rev8_ALP_AVAIL 0x80
153 #define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/include/linux/mfd/pcf50633/
H A Dmbc.h40 PCF50633_MBCC1_WDTIME_4H = 0x80,
52 PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, /* debounce time (32/64sec) */
63 PCF50633_MBCC7_BATSYSIMAX_2A0 = 0x80,
82 PCF50633_MBCS1_WDTEXP = 0x80,
116 PCF50633_MBCS3_VRES = 0x80, /* 1: Vbat > Vth(RES) */
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/wan/
H A Dhd64570.h96 /* DMA channel 0 (port 0 RX) registers - offset 0x80
102 #define DMAC0RX_OFFSET 0x80
161 #define ST_TX_EOM 0x80 /* End of frame */
164 #define ST_RX_EOM 0x80 /* End of frame */
173 #define DIR_EOTE 0x80 /* Transfer completed */
179 #define DSR_EOT 0x80 /* Transfer completed */
187 #define DMER_DME 0x80 /* DMA Master Enable */
194 #define MD0_HDLC 0x80 /* Bit-sync HDLC mode */
207 #define MD2_MANCHESTER 0x80
219 #define ST1_UDRN 0x80 /* MSC
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/m68knommu/platform/68328/
H A Dbootlogo.h12 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00,
22 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x20, 0x00, 0x00,
26 0x80, 0x08, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
28 0x00, 0xff, 0x80, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
29 0x00, 0x00, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x00, 0xf8, 0x80, 0x0f,
31 0x50, 0x04, 0x00, 0x00, 0x00, 0x78, 0x80, 0x0f, 0x00, 0x00, 0x00, 0x00,
41 0x54, 0x01, 0x00, 0x00, 0x00, 0x3e, 0x80, 0x01, 0x3a, 0x78, 0x80, 0x0e,
46 0x55, 0x00, 0x00, 0x00, 0x00, 0x1e, 0xc0, 0x03, 0x9f, 0xf3, 0x80, 0x0f,
47 0x78, 0x80,
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/
H A Dsaa7191.h48 #define SAA7191_STATUS_STTC 0x80 /* tv/vtr time constant */
53 #define SAA7191_LUMA_BYPS 0x80
85 #define SAA7191_GAIN_COLO 0x80
98 #define SAA7191_STDC_VTRC 0x80
113 #define SAA7191_IOCK_HPLL 0x80
134 #define SAA7191_CTL3_AUFD 0x80
211 #define SAA7191_HUE_DEFAULT 0x80
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/irda/
H A Dw83977af_ir.h50 #define ICR_ETMRI 0x80 /* Timer interrupt */
56 #define UFR_RXTL 0x80 /* Rx FIFO threshold (set to 16) */
66 #define ISR_TMR_I 0x80 /* Timer interrupt */
73 #define SET1 (0x80|UCR_DLS8) /* Make sure we keep 8N1 */
85 #define HCR_MIR_1152 0x80
133 #define FS_FO_FSFDR 0x80 /* Frame status FIFO data ready */
152 #define IRM_CR_AF_MNT 0x80 /* Automatic format */
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/usb/serial/
H A Dio_16654.h26 // to them via LCR bit 0x80 or LCR = 0xBF.
67 #define IER_CTS 0x80 // Enable CTS interrupt
83 #define FCR_RX_LEVEL_56 0x80 // Rx FIFO Level = 56 bytes
118 #define LCR_DL_ENABLE 0x80 // Enable access to divisor latch
132 #define MCR_BRG_DIV_4 0x80 // Divide baud rate clk by /4 instead of /1
142 #define LSR_FIFO_ERR 0x80 // Rx Fifo contains at least 1 erred char
152 #define EDGEPORT_MSR_CD 0x80 // Current state of CD
192 #define EFR_AUTO_CTS 0x80 // Use CTS for Tx flow control

Completed in 216 milliseconds

1234567891011>>