/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/ |
H A D | hydra.c | 11 /* The Amiganet is a Zorro-II board made by Hydra Systems. It contains a */ 12 /* NS8390 NIC (network interface controller) clone, 16 or 64K on-board RAM */ 116 unsigned long board = ZTWO_VADDR(z->resource.start); local 117 unsigned long ioaddr = board+HYDRA_NIC_BASE; 133 dev->dev_addr[j] = *((u8 *)(board + HYDRA_ADDRPROM + 2*j));
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/usb/host/ |
H A D | ohci-at91.c | 21 #include <mach/board.h> 209 struct at91_usbh_data *board = hcd->self.controller->platform_data; local 216 ohci->num_ports = board->ports;
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/include/linux/ |
H A D | nubus.h | 58 * SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272> 77 /* DrSW: Uniquely identifies the software interface to a board. This 107 /* DrHW: Uniquely identifies the hardware interface to a board (or at 283 /* This is the device's name rather than the board's. 284 Sometimes they are different. Usually the board name is 297 struct nubus_board* board; member in struct:nubus_dev 327 /* The root directory which contains the board and functional 329 int nubus_get_root_dir(const struct nubus_board* board, 331 /* The board directory */ 332 int nubus_get_board_dir(const struct nubus_board* board, [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/saa7164/ |
H A D | saa7164-cards.c | 44 /* Required during new board bringup */ 50 /* Required during new board bringup */ 420 "%s: Your board isn't known (yet) to the driver.\n" 442 switch (dev->board) { 476 /* Make sure we support the board model */ 479 /* Development board - Limit circulation */ 523 switch (dev->board) { 558 unit = &saa7164_boards[dev->board].unit[i]; 585 unit = &saa7164_boards[dev->board].unit[i]; 613 unit = &saa7164_boards[dev->board] [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/em28xx/ |
H A D | em28xx-input.c | 361 dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; 364 dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE; 370 em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk, 397 if (dev->board.ir_codes == NULL) { 450 err = ir_input_register(ir->input, dev->board.ir_codes,
|
H A D | em28xx.h | 492 struct em28xx_board board; member in struct:em28xx 802 if (dev->board.is_webcam) 805 if (dev->board.max_range_640_480 || dev->board.is_em2800) 813 if (dev->board.is_webcam) 816 if (dev->board.max_range_640_480)
|
H A D | em28xx-core.c | 361 if (dev->board.is_em2800) { 372 if (dev->board.has_msp34xx) 385 if (dev->board.mute_gpio && dev->mute) 386 em28xx_gpio_set(dev, dev->board.mute_gpio); 434 xclk = dev->board.xclk & 0x7f; 645 if (dev->board.is_webcam) 742 if (dev->board.is_em2800) { 866 /* Send GPIO reset sequences specified at board entry */ 893 return em28xx_gpio_set(dev, dev->board.suspend_gpio); 899 return em28xx_gpio_set(dev, dev->board [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/staging/cx25821/ |
H A D | cx25821.h | 72 #define INPUT(nr) (&cx25821_boards[dev->board].input[nr]) 288 /* board details */ 289 unsigned int board; member in struct:cx25821_dev 523 #define CX25821_ERR(fmt, args...) printk(KERN_ERR "cx25821(%d): " fmt, dev->board, ## args) 524 #define CX25821_WARN(fmt, args...) printk(KERN_WARNING "cx25821(%d): " fmt, dev->board , ## args) 525 #define CX25821_INFO(fmt, args...) printk(KERN_INFO "cx25821(%d): " fmt, dev->board , ## args)
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/x86/kernel/ |
H A D | process.c | 100 const char *board, *product; local 102 board = dmi_get_system_info(DMI_BOARD_NAME); 103 if (!board) 104 board = ""; 114 init_utsname()->version, board, product);
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/isdn/pcbit/ |
H A D | drv.c | 71 int pcbit_init_dev(int board, int mem_base, int irq) argument 82 dev_pcbit[board] = dev; 93 dev_pcbit[board] = NULL; 102 dev_pcbit[board] = NULL; 133 if (request_irq(irq, &pcbit_irq_handler, 0, pcbit_devname[board], dev) != 0) 140 dev_pcbit[board] = NULL; 162 dev_pcbit[board] = NULL; 185 strcpy(dev_if->id, pcbit_devname[board]); 194 dev_pcbit[board] = NULL; 212 void pcbit_terminate(int board) argument [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/saa7134/ |
H A D | saa7134.h | 374 #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) 375 #define card_is_empress(dev) (SAA7134_MPEG_EMPRESS == saa7134_boards[dev->board].mpeg) 376 #define card_is_dvb(dev) (SAA7134_MPEG_DVB == saa7134_boards[dev->board].mpeg) 377 #define card_has_mpeg(dev) (SAA7134_MPEG_UNUSED != saa7134_boards[dev->board].mpeg) 378 #define card(dev) (saa7134_boards[dev->board]) 379 #define card_in(dev,n) (saa7134_boards[dev->board].inputs[n]) 543 unsigned int board; member in struct:saa7134_dev
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/sfc/ |
H A D | falcon.c | 1417 struct falcon_board *board; local 1500 board = falcon_board(efx); 1501 board->i2c_adap.owner = THIS_MODULE; 1502 board->i2c_data = falcon_i2c_bit_operations; 1503 board->i2c_data.data = efx; 1504 board->i2c_adap.algo_data = &board->i2c_data; 1505 board->i2c_adap.dev.parent = &efx->pci_dev->dev; 1506 strlcpy(board->i2c_adap.name, "SFC4000 GPIO", 1507 sizeof(board 1682 struct falcon_board *board = falcon_board(efx); local [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/cx88/ |
H A D | cx88-mpeg.c | 58 if (dev->core->board.mpeg & CX88_MPEG_DVB) 60 if (dev->core->board.mpeg & CX88_MPEG_BLACKBIRD) 97 (core->board.mpeg & CX88_MPEG_DVB) ) { 142 (core->board.mpeg & CX88_MPEG_BLACKBIRD) ) { 156 core->board.mpeg ); 607 i < (sizeof(core->board.input) / sizeof(struct cx88_input)); 609 if (core->board.input[i].type == CX88_VMUX_DVB) { 688 "%s/2: subsystem: %04x:%04x, board: %s [card=%d]\n", 690 dev->pci->subsystem_device, dev->core->board.name, 736 "%s/2: subsystem: %04x:%04x, board [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/telephony/ |
H A D | ixj.c | 233 * Added board locks around G.729 and TS85 load routines. 349 printk("IXJ phone%d - allocate failed\n", j->board); 355 printk("IXJ phone%d - allocate succeded\n", j->board); 534 printk(KERN_INFO "IXJ: /dev/phone%d Setting Play Volume to 0x%4.4x\n", j->board, volume); 544 printk(KERN_INFO "IXJ: /dev/phone %d Setting Linear Play Volume to 0x%4.4x\n", j->board, volume); 882 printk(KERN_INFO "IXJ DAA Ring Interrupt /dev/phone%d at %ld\n", j->board, jiffies); 893 printk(KERN_INFO "IXJ DAA Caller_ID Interrupt /dev/phone%d at %ld\n", j->board, jiffies); 899 printk(KERN_INFO "IXJ DAA Cadence Interrupt /dev/phone%d at %ld\n", j->board, jiffies); 912 printk(KERN_INFO "IXJ DAA RMR /dev/phone%d was %s for %ld\n", j->board, XR0.bitreg.RMR?"on":"off", jiffies - j->pstn_last_rmr); 931 printk(KERN_INFO "IXJ Ring Cadence a state = %d /dev/phone%d at %ld\n", j->cadence_f[4].state, j->board, jiffie 1161 int board; local 2155 int board = j->p.board; local 6098 int board = NUM(inode); local [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/iserver/libcsc-0.82.3/include/ |
H A D | libcsc.h | 828 CSCnotificationBoardType const board 832 CSCnotificationBoardType const board, 838 CSCnotificationBoardType const board, 843 CSCnotificationBoardType const board, 848 CSCnotificationBoardType const board, 858 CSCnotificationBoardType const board
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/cx23885/ |
H A D | cx23885-cards.c | 44 /* board config info */ 518 "%s: Your board isn't known (yet) to the driver.\n" 538 /* Make sure we support the board model */ 695 switch (dev->board) { 729 switch (dev->board) { 1005 switch (dev->board) { 1068 switch (dev->board) { 1086 switch (dev->board) { 1113 switch (dev->board) { 1143 switch (dev->board) { [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/mips/sibyte/swarm/ |
H A D | platform.c | 8 #include <asm/sibyte/board.h>
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/usb/gadget/ |
H A D | at91_udc.h | 141 struct at91_udc_data board; member in struct:at91_udc
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/staging/comedi/drivers/ |
H A D | mpc8260cpm.c | 87 dev->board_ptr = mpc8260cpm_boards + dev->board;
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/video/omap/ |
H A D | lcd_ams_delta.c | 29 #include <plat/board-ams-delta.h>
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/staging/msm/ |
H A D | msm_fb.h | 42 #include <mach/board.h>
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/input/serio/ |
H A D | ams_delta_serio.c | 29 #include <plat/board-ams-delta.h>
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/char/ |
H A D | epca.h | 98 unsigned char m_dcd ; /* is indiginous to this board to */ 130 struct board_info *board; member in struct:channel
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/sparc/kernel/ |
H A D | of_device_32.c | 377 int board, slot; local 395 * a "board#" property, something is very wrong. 403 board = of_getintprop_default(io_unit, "board#", -1); 404 if (board == -1) { 405 printk("%s: Error, lacks board# property.\n", 415 this_irq = (((board + 1) << 5) +
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/plat-omap/ |
H A D | usb.c | 30 #include <plat/board.h>
|