Searched hist:94 (Results 1 - 25 of 61) sorted by relevance

123

/freebsd-10.3-release/gnu/usr.bin/grep/
H A DAUTHORS94 Tue Jul 06 18:45:26 MDT 1993 nate Update GNU grep to version 2.0
H A DNEWS94 Tue Jul 06 18:45:26 MDT 1993 nate Update GNU grep to version 2.0
H A DMakefilediff 94 Tue Jul 06 18:45:26 MDT 1993 nate Update GNU grep to version 2.0
/freebsd-10.3-release/sbin/camcontrol/
H A Dmodeedit.cdiff 290385 Thu Nov 05 07:56:10 MST 2015 ngie MFC r289913,r289916:

r289913:

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka
"Method of Reporting Informational Exceptions") in the SCSI mode database as
the field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is
4 bits wide, not 4 bytes wide

1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdf

Bug 200619
Reported by: Michael Baptist <mbaptist@isilon.com>
Submitted by: Lars Skodje <lskodje@isilon.com>
Sponsored by: EMC / Isilon Storage Division

r289916:

Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
diff 290385 Thu Nov 05 07:56:10 MST 2015 ngie MFC r289913,r289916:

r289913:

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka
"Method of Reporting Informational Exceptions") in the SCSI mode database as
the field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is
4 bits wide, not 4 bytes wide

1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdf

Bug 200619
Reported by: Michael Baptist <mbaptist@isilon.com>
Submitted by: Lars Skodje <lskodje@isilon.com>
Sponsored by: EMC / Isilon Storage Division

r289916:

Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
diff 290385 Thu Nov 05 07:56:10 MST 2015 ngie MFC r289913,r289916:

r289913:

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka
"Method of Reporting Informational Exceptions") in the SCSI mode database as
the field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is
4 bits wide, not 4 bytes wide

1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdf

Bug 200619
Reported by: Michael Baptist <mbaptist@isilon.com>
Submitted by: Lars Skodje <lskodje@isilon.com>
Sponsored by: EMC / Isilon Storage Division

r289916:

Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
/freebsd-10.3-release/etc/
H A Dphonesdiff 30361 Mon Oct 13 03:17:09 MDT 1997 hoek 1) Remove comment about tip(1) not accepting comments in /etc/phones
Forgotten-By: rgrimes, early '94 (see rev 1.3, 1.4).

2) Use 555-#### examples to avoid potentially expensive accidents.

3) Escape @ in example pn capability (see related FAQ.sgml question).
H A Dremotediff 30361 Mon Oct 13 03:17:09 MDT 1997 hoek 1) Remove comment about tip(1) not accepting comments in /etc/phones
Forgotten-By: rgrimes, early '94 (see rev 1.3, 1.4).

2) Use 555-#### examples to avoid potentially expensive accidents.

3) Escape @ in example pn capability (see related FAQ.sgml question).
/freebsd-10.3-release/share/misc/
H A Dscsi_modesdiff 290385 Thu Nov 05 07:56:10 MST 2015 ngie MFC r289913,r289916:

r289913:

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka
"Method of Reporting Informational Exceptions") in the SCSI mode database as
the field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is
4 bits wide, not 4 bytes wide

1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdf

Bug 200619
Reported by: Michael Baptist <mbaptist@isilon.com>
Submitted by: Lars Skodje <lskodje@isilon.com>
Sponsored by: EMC / Isilon Storage Division

r289916:

Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
diff 290385 Thu Nov 05 07:56:10 MST 2015 ngie MFC r289913,r289916:

r289913:

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka
"Method of Reporting Informational Exceptions") in the SCSI mode database as
the field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is
4 bits wide, not 4 bytes wide

1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdf

Bug 200619
Reported by: Michael Baptist <mbaptist@isilon.com>
Submitted by: Lars Skodje <lskodje@isilon.com>
Sponsored by: EMC / Isilon Storage Division

r289916:

Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
diff 290385 Thu Nov 05 07:56:10 MST 2015 ngie MFC r289913,r289916:

r289913:

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka
"Method of Reporting Informational Exceptions") in the SCSI mode database as
the field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is
4 bits wide, not 4 bytes wide

1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdf

Bug 200619
Reported by: Michael Baptist <mbaptist@isilon.com>
Submitted by: Lars Skodje <lskodje@isilon.com>
Sponsored by: EMC / Isilon Storage Division

r289916:

Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
/freebsd-10.3-release/lib/libstand/
H A Dprintf.cdiff 209837 Thu Jul 08 22:36:54 MDT 2010 jkim Sync. printf() of libstand(3) with sys/kern/subr_prf.c.

CVS r1.94 jhb:
Cast the integer read as the first argument for %b to an unsigned integer
so it's value is not sign extended when assigned to the uintmax_t variable
used internally by printf. For example, if bit 31 is set in the cpuid
feature word, then %b would print out the initial value as a 16 character
hexadecimal value. Now it only prints out an 8 character value.

CVS r1.109 njl:
Add support for 'h' and 'hh' modifiers for printf(9).

CVS r1.117 phk:
If we ignore an unknown % sequence, we must stop interpreting the remaining
% arguments because the varargs are now out of sync and there is a risk that
we might for instance dereference an integer in a %s argument.

SVN r209836 jkim:
Implement optional 'precision' for numbers. Previously, it was parsed but
ignored. Some third-party modules (e.g., APCICA) prefer this format over
zero padding flag '0'.
/freebsd-10.3-release/sys/net/
H A Dif_tun.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
/freebsd-10.3-release/share/man/man4/
H A Dkeyboard.4diff 1061 Tue Feb 01 06:22:29 MST 1994 nate From: sos@login.dkuug.dk (S|ren Schmidt)
Subject: syscons-1.3
Date: Sat, 29 Jan 94 23:33:50 MET

But here is the (hopefully) final syscons-1.3....

....

I've changed sgetc so it works as the pccons parallel
(it now uses a scgetc internally).


[
There were a couple changes that Bruce Evans sent me that were applied
to this version along with some changes that S'ren didn't incorporate
into the final version. There will be only minor changes if anything
from this version to his final release.
]
H A Dscreen.4diff 1061 Tue Feb 01 06:22:29 MST 1994 nate From: sos@login.dkuug.dk (S|ren Schmidt)
Subject: syscons-1.3
Date: Sat, 29 Jan 94 23:33:50 MET

But here is the (hopefully) final syscons-1.3....

....

I've changed sgetc so it works as the pccons parallel
(it now uses a scgetc internally).


[
There were a couple changes that Bruce Evans sent me that were applied
to this version along with some changes that S'ren didn't incorporate
into the final version. There will be only minor changes if anything
from this version to his final release.
]
/freebsd-10.3-release/sys/dev/wi/
H A Dif_wi_pci.cdiff 118679 Fri Aug 08 23:33:42 MDT 2003 marcel Add the PCI Id of the Intersil prism3 (mini-PCI) WLAN chip. The Vaio
PCG-505BX (for example) has one of those:

wi0: <Intersil Prism3> mem 0xf8000000-0xf8000fff at device 2.0 on pci2
wi0: 802.11 address: 00:02:8a:94:d8:73
wi0: using RF:PRISM3(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.1), Station (1.5.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
/freebsd-10.3-release/usr.sbin/ppp/
H A Dcommand.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dlqr.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dslcompress.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dasync.cdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dfilter.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dfsm.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dhdlc.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dlcp.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
H A Dmbuf.hdiff 6735 Sun Feb 26 12:18:08 MST 1995 amurai New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
/freebsd-10.3-release/contrib/groff/tmac/
H A Dgroff_mdoc.mandiff 165538 Mon Dec 25 08:59:09 MST 2006 ru Pull up current -mdoc version from vendor.

- New Darwin, FreeBSD, and NetBSD versions.
- DragonFly support including the new .Dx macro.
- New .St strings: -isoC-amd1, -isoC-tcor1, -isoC-tcor2, and -ieee1275-94.
/freebsd-10.3-release/sys/dev/kbd/
H A Dkbdtables.hdiff 1061 Tue Feb 01 06:22:29 MST 1994 nate From: sos@login.dkuug.dk (S|ren Schmidt)
Subject: syscons-1.3
Date: Sat, 29 Jan 94 23:33:50 MET

But here is the (hopefully) final syscons-1.3....

....

I've changed sgetc so it works as the pccons parallel
(it now uses a scgetc internally).


[
There were a couple changes that Bruce Evans sent me that were applied
to this version along with some changes that S'ren didn't incorporate
into the final version. There will be only minor changes if anything
from this version to his final release.
]
/freebsd-10.3-release/sys/dev/sound/pci/
H A Demu10k1.cdiff 153799 Wed Dec 28 17:57:36 MST 2005 netchild Fix the order of the stereo channels (left <-> right).

From the PR:
---snip---
I think I have found the change which reversed the channels.
Revision 1.44 of emu10k1.c, which added Audigy support, has the line

emu_wrptr(sc, v->vnum, FXRT, 0xd01c0000);

replaced with the following lines:

if (sc->audigy) {
emu_wrptr(sc, v->vnum, A_FXRT1, v->fxrt1);
emu_wrptr(sc, v->vnum, A_FXRT2, v->fxrt2);
emu_wrptr(sc, v->vnum, A_SENDAMOUNTS, 0);
}
else
emu_wrptr(sc, v->vnum, FXRT, v->fxrt1 << 16);

where v->fxrt1 << 16 == 0xd10c0000

I don't have Audigy, so I'm not sure if the problem affects Audigy cards
too. The order of the channels can't be tested by just altering mixer
settings. Here's a small program to test if the channels are reversed on
your sound card:

#include <sys/soundcard.h>
#include <fcntl.h>
#include <unistd.h>

int main(int argc, char **argv)
{
int fd = open("/dev/dsp", O_WRONLY), format = AFMT_S16_LE;
int channels = 2, rate = 22050, i;

/* 450 Hz sine wave on left channel, right channel silent */
unsigned char samples[] = {0, 0, 0, 0, 94, 16, 0, 0, 120, 32, 0, 0,
9, 48, 0, 0, 208, 62, 0, 0, 143, 76, 0, 0, 12, 89, 0, 0, 19, 100,
0, 0, 117, 109, 0, 0, 11, 117, 0, 0, 182, 122, 0, 0, 92, 126, 0,
0, 239, 127, 0, 0, 105, 127, 0, 0, 202, 124, 0, 0, 32, 120, 0, 0,
124, 113, 0, 0, 251, 104, 0, 0, 193, 94, 0, 0, 249, 82, 0, 0,
212, 69, 0, 0, 138, 55, 0, 0, 85, 40, 0, 0, 120, 24, 0, 0, 51, 8,
0, 0, 205, 247, 0, 0, 136, 231, 0, 0, 171, 215, 0, 0, 118, 200,
0, 0, 44, 186, 0, 0, 7, 173, 0, 0, 63, 161, 0, 0, 5, 151, 0, 0,
132, 142, 0, 0, 224, 135, 0, 0, 54, 131, 0, 0, 151, 128, 0, 0,
17, 128, 0, 0, 164, 129, 0, 0, 74, 133, 0, 0, 245, 138, 0, 0,
139, 146, 0, 0, 237, 155, 0, 0, 244, 166, 0, 0, 113, 179, 0, 0,
48, 193, 0, 0, 247, 207, 0, 0, 136, 223, 0, 0, 162, 239, 0, 0};

ioctl(fd, SNDCTL_DSP_SETFMT,&format);
ioctl(fd, SNDCTL_DSP_CHANNELS,&channels);
ioctl(fd, SNDCTL_DSP_SPEED,&rate);

for(i=0;i<500;i++)
write(fd, &samples, sizeof(samples));
write(fd, &samples, 2); /* swap channels */
for(i=0;i<500;i++)
write(fd, &samples, sizeof(samples));

return 0;
}

You should hear a sound on the left channel followed by a sound on the
right channel. If you hear a sound on the right channel first, the
channels are reversed.
---snip---

Owners of an audigy card should verify if it DTRT and report back.

Noticed by: Matthias Buelow <mkb@mukappabeta.de>
Submitted by: Juha-Matti Tilli <juhis@nallukka.net>
PR: 72221
diff 153799 Wed Dec 28 17:57:36 MST 2005 netchild Fix the order of the stereo channels (left <-> right).

From the PR:
---snip---
I think I have found the change which reversed the channels.
Revision 1.44 of emu10k1.c, which added Audigy support, has the line

emu_wrptr(sc, v->vnum, FXRT, 0xd01c0000);

replaced with the following lines:

if (sc->audigy) {
emu_wrptr(sc, v->vnum, A_FXRT1, v->fxrt1);
emu_wrptr(sc, v->vnum, A_FXRT2, v->fxrt2);
emu_wrptr(sc, v->vnum, A_SENDAMOUNTS, 0);
}
else
emu_wrptr(sc, v->vnum, FXRT, v->fxrt1 << 16);

where v->fxrt1 << 16 == 0xd10c0000

I don't have Audigy, so I'm not sure if the problem affects Audigy cards
too. The order of the channels can't be tested by just altering mixer
settings. Here's a small program to test if the channels are reversed on
your sound card:

#include <sys/soundcard.h>
#include <fcntl.h>
#include <unistd.h>

int main(int argc, char **argv)
{
int fd = open("/dev/dsp", O_WRONLY), format = AFMT_S16_LE;
int channels = 2, rate = 22050, i;

/* 450 Hz sine wave on left channel, right channel silent */
unsigned char samples[] = {0, 0, 0, 0, 94, 16, 0, 0, 120, 32, 0, 0,
9, 48, 0, 0, 208, 62, 0, 0, 143, 76, 0, 0, 12, 89, 0, 0, 19, 100,
0, 0, 117, 109, 0, 0, 11, 117, 0, 0, 182, 122, 0, 0, 92, 126, 0,
0, 239, 127, 0, 0, 105, 127, 0, 0, 202, 124, 0, 0, 32, 120, 0, 0,
124, 113, 0, 0, 251, 104, 0, 0, 193, 94, 0, 0, 249, 82, 0, 0,
212, 69, 0, 0, 138, 55, 0, 0, 85, 40, 0, 0, 120, 24, 0, 0, 51, 8,
0, 0, 205, 247, 0, 0, 136, 231, 0, 0, 171, 215, 0, 0, 118, 200,
0, 0, 44, 186, 0, 0, 7, 173, 0, 0, 63, 161, 0, 0, 5, 151, 0, 0,
132, 142, 0, 0, 224, 135, 0, 0, 54, 131, 0, 0, 151, 128, 0, 0,
17, 128, 0, 0, 164, 129, 0, 0, 74, 133, 0, 0, 245, 138, 0, 0,
139, 146, 0, 0, 237, 155, 0, 0, 244, 166, 0, 0, 113, 179, 0, 0,
48, 193, 0, 0, 247, 207, 0, 0, 136, 223, 0, 0, 162, 239, 0, 0};

ioctl(fd, SNDCTL_DSP_SETFMT,&format);
ioctl(fd, SNDCTL_DSP_CHANNELS,&channels);
ioctl(fd, SNDCTL_DSP_SPEED,&rate);

for(i=0;i<500;i++)
write(fd, &samples, sizeof(samples));
write(fd, &samples, 2); /* swap channels */
for(i=0;i<500;i++)
write(fd, &samples, sizeof(samples));

return 0;
}

You should hear a sound on the left channel followed by a sound on the
right channel. If you hear a sound on the right channel first, the
channels are reversed.
---snip---

Owners of an audigy card should verify if it DTRT and report back.

Noticed by: Matthias Buelow <mkb@mukappabeta.de>
Submitted by: Juha-Matti Tilli <juhis@nallukka.net>
PR: 72221
/freebsd-10.3-release/sbin/geom/class/part/
H A Dgpart.8diff 230059 Fri Jan 13 12:50:48 MST 2012 des Provide a better explanation for the sizing of the boot partition, and
reduce the size of the partition in the example from 128 blocks to 94
blocks so it will end on a 128-block boundary. Also remove the -b
option from the next example.

MFC after: 3 weeks

Completed in 573 milliseconds

123