- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r289913,r289916:

r289913:

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka
"Method of Reporting Informational Exceptions") in the SCSI mode database as
the field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is
4 bits wide, not 4 bytes wide

1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdf

Bug 200619
Reported by: Michael Baptist <mbaptist@isilon.com>
Submitted by: Lars Skodje <lskodje@isilon.com>
Sponsored by: EMC / Isilon Storage Division

r289916:

Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division

MFC r273072: Add LBPERE mode bit definition.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add some more SCSI mode pages from SPC-4 spec.

MFC after: 1 week

Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3. Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c: Change uses of scsi_extract_sense() to use
scsi_extract_sense_len().

Use scsi_get_sks() instead of accessing sense key specific
data directly.

scsi_modes: Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c: Change references to struct scsi_sense_data to struct
scsi_sense_data_fixed. This should be changed to allow the
user to specify fixed or descriptor sense, and then use
scsi_set_sense_data() to build the sense data.

ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data
manually.

cam_periph.c: Use scsi_extract_sense_len() instead of using
scsi_extract_sense() or accessing sense data directly.

cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of
struct scsi_sense_data from 32 to 252 bytes changes the
size of struct ccb_scsiio, but not the size of union ccb.
So the version must be bumped to prevent structure
mis-matches.

scsi_all.h: Lots of updated SCSI sense data and other structures.

Add function prototypes for the new sense data functions.

Take out the inline implementation of scsi_extract_sense().
It is now too large to put in a header file.

Add macros to calculate whether fields are present and
filled in fixed and descriptor sense data

scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry
data, and we'll assume a direct access device in that case.

Changed the SCSI RESERVED sense key name and description
to COMPLETED, as it is now defined in the spec.

Change the error recovery action for a number of read errors
to prevent lots of retries when the drive has said that the
block isn't accessible. This speeds up reconstruction of
the block by any RAID software running on top of the drive
(e.g. ZFS).

In scsi_sense_desc(), allow for invalid sense key numbers.
This allows calling this routine without checking the input
values first.

Change scsi_error_action() to use scsi_extract_sense_len(),
and handle things when invalid asc/ascq values are
encountered.

Add a new routine, scsi_desc_iterate(), that will call the
supplied function for every descriptor in descriptor format
sense data.

Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
which build descriptor and fixed format sense data. They
currently default to fixed format sense data.

Add a number of scsi_get_*() functions, which get different
types of sense data fields from either fixed or descriptor
format sense data, if the data is present.

Add a number of scsi_*_sbuf() functions, which print
formatted versions of various sense data fields. These
functions work for either fixed or descriptor sense.

Add a number of scsi_sense_*_sbuf() functions, which have a
standard calling interface and print the indicated field.
These functions take descriptors only.

Add scsi_sense_desc_sbuf(), which will print a formatted
version of the given sense descriptor.

Pull out a majority of the scsi_sense_sbuf() function and
put it into scsi_sense_only_sbuf(). This allows callers
that don't use struct ccb_scsiio to easily utilize the
printing routines. Revamp that function to handle
descriptor sense and use the new sense fetching and
printing routines.

Move scsi_extract_sense() into scsi_all.c, and implement it
in terms of the new function, scsi_extract_sense_len().
The _len() version takes a length (which should be the
sense length - residual) and can indicate which fields are
present and valid in the sense data.

Add a couple of new scsi_get_*() routines to get the sense
key, asc, and ascq only.

mly.c: Rename struct scsi_sense_data to struct
scsi_sense_data_fixed.

sbp_targ.c: Use the new sense fetching routines to get sense data
instead of accessing it directly.

sbp.c: Change the firewire/SCSI sense data transformation code to
use struct scsi_sense_data_fixed instead of struct
scsi_sense_data. This should be changed later to use
scsi_set_sense_data().

ciss.c: Calculate the sense residual properly. Use
scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c: Set the sense residual properly.

iir.c: Use scsi_set_sense_data() instead of building sense data by
hand.

iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data
directly.

umass.c: Use scsi_set_sense_data() to build sense data.

Grab the sense key using scsi_get_sense_key().

Calculate the sense residual properly.

isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key
values.

Calculate and set the sense residual.

MFC after: 3 days
Sponsored by: Spectra Logic Corporation

Add mode page 0x1b, "Removable Block Access Capacities". This mode page is
implemented by USB floppy devices using the UFI command set.

Reviewed by: ken, scottl
Source: USB Mass Storage UFI Specification v1.0
MFC after: 2 weeks

Add a definition for mode page 0x2a "CD capabilities and mechanical
status page".

Include the Power Control page (0x1a) that is standardized by SCSI-3.
At least some IBM drives support the Standby Condition Timer (i. e.
they allow for an automatic spindown).

Update copyright for 2001. I don't want to insert my name for just
one mode page definition, do people think that `The FreeBSD Project'
is OK?

fix minor oops in new data compression page definition

Add 3 SCSI-3 bits for Sequential Access Device Congifuration Page.
Add Data Compression Page (SCSI-3). Add some clarifying comments
at the top of the file that say what the syntax is.

This is an overhaul of the mode page handling in camcontrol as well as
related patches. These include:
* Mode page editting can be scripted. This involves two
things: first, if stdin is not a tty, changes are read from
stdin rather than invoking $EDITOR. Second, and more
importantly, not all modepage entries must be included in the
change set. This means that camcontrol can now gracefully handle
more intrusive editting from the $EDITOR, including removal or
rearrangement of lines. It also means that you can do stuff
like:
# echo "WCE: 1" | camcontrol modepage da3 -m 8 -e
# newfs /dev/da3
# echo "WCE: 0" | camcontrol modepage da3 -m 8 -e
* Range-checking on user-supplied input values. modeedit.c now
uses the field width specifiers to determine the maximum
allowable value for a field. If the user enters a value larger
than the maximum, it clips the value to the max and warns the
user. This also involved patching cam_cmdparse.c to be more
consistent with regards to the "count" parameter to arg_put
(previously is was the length of strings and 1 for all integral
types). The cam_cdbparse(3) man page was also updated to reflect
the revised semantics.
* In the process, I removed the 64 entry limit on mode pages (not
that we were even close to hitting that limit). This was a nice
side-effect of the other changes.
* Technically, the new mode editting functionality allows editting
of character array entries in mode pages (type 'c' or 'z'),
however since buff_encode doesn't grok them it is currently
useless.
* Camcontrol gained two new options related to mode pages: -l and
-b. The former lists all available mode pages for a given
device. The latter forces mode page display in binary format
(the default when no mode page definition was found in
scsi_modes).
* Added support for mode page names to scsi_modes. Allows names to
be displayed alongside mode numbers in the mode page
listing. Updated scsi_modes to use the new functionality. This
also adds the semicolon into the scsi_modes syntax as an
optional mode page definition terminator. This is needed to name
pages without providing a page format definition.
* Updated scsi_all.h to include a structure describing mode page
headers.
* Added $FreeBSD$ line to scsi_modes.

Inspired by: dwhite
Reviewed by: ken

Add some extra flags in the caching page.

Some firmware versions becomes unreliable when these bits are not preserved,
e.g. ST15150N-0017 breaks if the DISC bit is cleared in the caching page.
This happened by default when editing the page.

Add page 0x10 (Device Configuration Page for sequential-access devices).

Fix a spelling error.

Add the ``CD-ROM Audio Control Parameter Page''.

New modes file needed for mode editor. "b" can not stand for bit fields.

Symoblic representation of mode pages