Searched hist:4 (Results 26 - 50 of 9856) sorted by relevance

1234567891011>>

/freebsd-11-stable/sys/dev/cxgbe/cudbg/
H A D	cudbg_lib.c	330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
H A D	fastlz_api.c	diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
H A D	cudbg_entity.h	diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
H A D	cudbg_wtp.c	diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
H A D	cudbg_flash_utils.c	diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
H A D	fastlz.c	diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
H A D	cudbg_lib_common.h	diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
H A D	cudbg_lib.h	diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications diff 330307 Sat Mar 03 02:34:54 MST 2018 np MFC r319506, r319872, r321063, r321103, r321179, r321390, r321435, r321582, r321671, r322014, r322034, r322055, r322123, r322167, r322425, r322549, r322914, r322960, r322962, r322964, r322985, r322990, r323006, r323026, r323041, r323069, r323078, r323343, r323514, r323520, r324296, r324379, r324386, r324443, r324945, r325596, r325680, r325880, r325883-r325884, r325961, r326026, r326042, r327062, r327093, r327332, r327528, r328420, and r328423. r319506: cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. r319872: cxgbe(4): Do not request an FEC setting that the port does not support. r321063: cxgbe(4): Various link/media related improvements. - Deal with changes to port_type, and not just port_mod when a transceiver is changed. This fixes hot swapping of transceivers of different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or SFP28 in a SFP28 port, etc.). - Always refresh media information for ifconfig if the port is down. The firmware does not generate tranceiver-change interrupts unless at least one VI is enabled on the physical port. Before this change ifconfig diplayed potentially stale information for ports that were administratively down. - Always recalculate and reapply L1 config on a transceiver change. - Display PAUSE settings in ifconfig. The driver sysctls for this continue to work as well. r321103: cxgbe(4): New ioctls to flash bootrom and boot config to the card. r321179: cxgbe/t4_tom: Log more details about the newly ESTABLISHED tid to the trace buffer. r321390: cxgbe(4): Install the firmware bundled with the driver to the card if it doesn't seem to have one. This lets the driver recover automatically from incomplete firmware upgrades (panic, reboot, power loss, etc. in the middle of an upgrade). r321435: cxgbe(4): Display some more TOE parameters related to retransmission and keepalive in the sysctl MIB. Provide tunables to change some of these parameters. These are supposed to be setup by the firmware so these tunables are for experimentation only. r321582: cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. r321671: cxgbe/iw_cxgbe: Log the end point's history and flags to the trace buffer just before it's freed. r322014: cxgbe(4): Initial import of the "collect" component of Chelsio unified debug (cudbg) code, hooked up to the main driver via an ioctl. The ioctl can be used to collect the chip's internal state in a compressed dump file. These dumps can be decoded with the "view" component of cudbg. r322034: cxgbe(4): Always use the first and not the last virtual interface associated with a port in begin_synchronized_op. r322055: cxgbe(4): Allow the TOE timer tunables to be set with microsecond precision. These timers are already displayed in microseconds in the sysctl MIB. Add variables to track these tunables while here. r322123: cxgbe(4): Avoid a NULL dereference that would occur during module unload if there were problems earlier during attach. r322167: cxgbe(4): Add the T6 and T5 Unified Wire configuration files to the kernel, just like for T4, when the driver is compiled into the kernel. r322425: cxgbe(4): Save the last reported link parameters and compare them with the current state to determine whether to generate a link-state change notification. This fixes a bug introduced in r321063 that caused the driver to sometimes skip these notifications. r322549: cxgbe/t4_tom: Use correct name for the ISS-valid bit in options2. r322914: cxgbe(4): Dump the mailbox contents in the same format as CH_DUMP_MBOX. r322960: cxgbe(4): Verify that the driver accesses the firmware mailbox in a thread-safe manner. r322962: cxgbe(4): Remove write only variable from t4_port_init. r322964: cxgbe(4): vi_mac_funcs should include the base Ethernet function. It is already used in the driver as if it does. r322985: cxgbe(4): Maintain one ifmedia per physical port instead of one per Virtual Interface (VI). All autonomous VIs that share a port share the same media. r322990: cxgbe(4): Do not access the mailbox without appropriate locks while creating hardware VIs. This fixes a bad race on systems with hw.cxgbe.num_vis > 1. r323006: cxgbe(4): Update T6/T5/T4 firmwares to 1.16.59.0. r323026: cxgbe(4): Zero out the memory allocated for the debug dump. cudbg_collect seems to expect it this way. r323041: cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. r323069: cxgbe/t4_tom: Add a knob to select the congestion control algorigthm used by the TOE hardware for fully offloaded connections. The knob affects new connections only. r323078: cxgbe/t4_tom: There may not be a tid to update if the connection isn't established. r323343: cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. r323514: cxgbetool(8): mode must be specified when creating the dump file. r323520: cxgbe(4): Ignore capabilities that depend on TOE when the firmware reports TOE is not available. r324296: cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. r324379: cxgbetool(8): Do not create a large file devoid of useful content when the dumpstate ioctl fails. Make the file world-readable while here. r324386: cxgbe(4): Update T6, T5, and T4 firmwares to 1.16.63.0. r324443: cxgbetool(8): Do not close uninitialized fd on malloc failure. r324945: cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. r325596: cxgbe(4): Do not request settings not supported by the port. r325680: cxgbe(4): Excluce mdi from the check against port capabilities. r325880: cxgbe(4): Combine all _10g and _1g tunables and drop the suffix from their names. The finer-grained knobs weren't practically useful. r325883: cxgbe(4): Sanitize t4_num_vis during MOD_LOAD like all other t4_* tunables. Add num_vis to the intrs_and_queues structure as it affects the number of interrupts requested and queues created. In future cfg_itype_and_nqueues might lower it incrementally instead of going straight to 1 when enough interrupts aren't available. r325884: cxgbe(4): Remove rsrv_noflowq from intrs_and_queues structure as it does not influence or get affected by the number of interrupts or queues. r325961: cxgbe(4): Add core Vdd to the sysctl MIB. r326026: cxgbe(4): Add a custom board to the device id list. r326042: cxgbe(4): Fix unsafe mailbox access in cudbg. r327062: cxgbe(4): Read the MFG diags version from the VPD and make it available in the sysctl MIB. r327093: cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. r327332: cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. r327528: cxgbe(4): Add a knob to enable/disable PCIe relaxed ordering. Disable it by default when running on Intel CPUs. r328420: cxgbe(4): Do not display harmless warning in non-debug builds. r328423: cxgbe(4): Accept old names of a couple of tunables. Sponsored by: Chelsio Communications
/freebsd-11-stable/sys/dev/cxgbe/firmware/
H A D	t6fw_cfg_fpga.txt	309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications
/freebsd-11-stable/sys/dev/cxgbe/
H A D	if_ccv.c	309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications
H A D	if_cc.c	309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications 309560 Mon Dec 05 13:46:56 MST 2016 jhb MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906, 305908,306062,306063,306137,306138,306206,306216,306273,306295,306301, 306465,309302: Add support for adapters using the Terminator T6 ASIC. 305695: cxgbe(4): Set up fl_starve_threshold2 accurately for T6. 305696: cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. 305699: cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. 305702: cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. 305703: cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6. 305713: cxgbe(4): Add support for additional port types and link speeds. 305715: cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one of the capabilities of the crypto engine in T6. 305827: cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests. 305852: cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. 305906: cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6. 305908: cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. 306062: cxgbe(4): Show wcwr_stats for T6 cards. 306063: cxgbe(4): Setup congestion response for T6 rx queues. 306137: cxgbetool: Add T6 support to the SGE context decoder. 306138: Fix typo. 306206: cxgbe(4): Catch up with the different layout of WHOAMI in T6. Note that the code moved below t4_prep_adapter() as part of this change because now it needs a working chip_id(). 306216: cxgbe(4): Fix the output of the "tids" sysctl on T6. 306273: cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE message inside a FW_MSG. The base NIC already deals with updates in either form. 306295: cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media for 25Gbps and 100Gbps ports. This should have been part of r305713, which is when the driver first started reporting extended media types. 306301: cxgbe(4): Use the port's top speed to figure out whether it is "high speed" or not (for the purpose of calculating the number of queues etc.) This does the right thing for 25Gbps and 100Gbps ports. 306465: cxgbe(4): Claim the T6 -DBG card. 309302: cxgbe(4): Include firmware for T6 cards in the driver. Update all firmwares to 1.16.12.0. Sponsored by: Chelsio Communications
/freebsd-11-stable/sys/modules/ntb/ntb_hw_plx/
H A D	Makefile	diff 323453 Mon Sep 11 18:54:53 MDT 2017 mav MFC r323032, r323053, r323058, r323059, r323084, r323114, r323127: Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. diff 323453 Mon Sep 11 18:54:53 MDT 2017 mav MFC r323032, r323053, r323058, r323059, r323084, r323114, r323127: Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. diff 323453 Mon Sep 11 18:54:53 MDT 2017 mav MFC r323032, r323053, r323058, r323059, r323084, r323114, r323127: Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. diff 323453 Mon Sep 11 18:54:53 MDT 2017 mav MFC r323032, r323053, r323058, r323059, r323084, r323114, r323127: Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. diff 323453 Mon Sep 11 18:54:53 MDT 2017 mav MFC r323032, r323053, r323058, r323059, r323084, r323114, r323127: Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. 323032 Wed Aug 30 21:26:20 MDT 2017 mav Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. MFC after: 2 weeks Sponsored by: iXsystems, Inc. 323032 Wed Aug 30 21:26:20 MDT 2017 mav Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. MFC after: 2 weeks Sponsored by: iXsystems, Inc. 323032 Wed Aug 30 21:26:20 MDT 2017 mav Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. MFC after: 2 weeks Sponsored by: iXsystems, Inc. 323032 Wed Aug 30 21:26:20 MDT 2017 mav Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. MFC after: 2 weeks Sponsored by: iXsystems, Inc. 323032 Wed Aug 30 21:26:20 MDT 2017 mav Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. MFC after: 2 weeks Sponsored by: iXsystems, Inc.
/freebsd-11-stable/share/man/man4/
H A D	gpioled.4	diff 266092 Wed May 14 20:04:40 MDT 2014 loos gpioiic.4 and gpioled.4 will first appear in 10.1-RELEASE. diff 266092 Wed May 14 20:04:40 MDT 2014 loos gpioiic.4 and gpioled.4 will first appear in 10.1-RELEASE. diff 261843 Thu Feb 13 16:02:12 MST 2014 loos Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. Approved by: adrian (mentor, implicit) diff 261843 Thu Feb 13 16:02:12 MST 2014 loos Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. Approved by: adrian (mentor, implicit) diff 261843 Thu Feb 13 16:02:12 MST 2014 loos Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. Approved by: adrian (mentor, implicit) diff 261843 Thu Feb 13 16:02:12 MST 2014 loos Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. Approved by: adrian (mentor, implicit) diff 261843 Thu Feb 13 16:02:12 MST 2014 loos Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. Approved by: adrian (mentor, implicit) 258044 Tue Nov 12 10:48:11 MST 2013 loos Adds gpioiic.4 and gpioled.4 man pages. Moves some of the information that was previously available on gpio.4 to their respectives pages. Add the cross references on gpioctl.8. Approved by: adrian (mentor) 258044 Tue Nov 12 10:48:11 MST 2013 loos Adds gpioiic.4 and gpioled.4 man pages. Moves some of the information that was previously available on gpio.4 to their respectives pages. Add the cross references on gpioctl.8. Approved by: adrian (mentor) 258044 Tue Nov 12 10:48:11 MST 2013 loos Adds gpioiic.4 and gpioled.4 man pages. Moves some of the information that was previously available on gpio.4 to their respectives pages. Add the cross references on gpioctl.8. Approved by: adrian (mentor)
H A D	vlan.4	diff 301579 Wed Jun 08 02:23:12 MDT 2016 araujo Bump date on ifconfig(8) and vlan(4) to reflect the changes made on revision r301496. diff 301496 Mon Jun 06 07:59:41 MDT 2016 araujo Add support to priority code point (PCP) that is an 3-bit field which refers to IEEE 802.1p class of service and maps to the frame priority level. Values in order of priority are: 1 (Background (lowest)), 0 (Best effort (default)), 2 (Excellent effort), 3 (Critical applications), 4 (Video, < 100ms latency), 5 (Video, < 10ms latency), 6 (Internetwork control) and 7 (Network control (highest)). Example of usage: root# ifconfig em0.1 create root# ifconfig em0.1 vlanpcp 3 Note: The review D801 includes the pf(4) part, but as discussed with kristof, we won't commit the pf(4) bits for now. The credits of the original code is from rwatson. Differential Revision: https://reviews.freebsd.org/D801 Reviewed by: gnn, adrian, loos Discussed with: rwatson, glebius, kristof Tested by: many including Matthew Grooms <mgrooms__shrew.net> Obtained from: pfSense Relnotes: Yes diff 301496 Mon Jun 06 07:59:41 MDT 2016 araujo Add support to priority code point (PCP) that is an 3-bit field which refers to IEEE 802.1p class of service and maps to the frame priority level. Values in order of priority are: 1 (Background (lowest)), 0 (Best effort (default)), 2 (Excellent effort), 3 (Critical applications), 4 (Video, < 100ms latency), 5 (Video, < 10ms latency), 6 (Internetwork control) and 7 (Network control (highest)). Example of usage: root# ifconfig em0.1 create root# ifconfig em0.1 vlanpcp 3 Note: The review D801 includes the pf(4) part, but as discussed with kristof, we won't commit the pf(4) bits for now. The credits of the original code is from rwatson. Differential Revision: https://reviews.freebsd.org/D801 Reviewed by: gnn, adrian, loos Discussed with: rwatson, glebius, kristof Tested by: many including Matthew Grooms <mgrooms__shrew.net> Obtained from: pfSense Relnotes: Yes diff 301496 Mon Jun 06 07:59:41 MDT 2016 araujo Add support to priority code point (PCP) that is an 3-bit field which refers to IEEE 802.1p class of service and maps to the frame priority level. Values in order of priority are: 1 (Background (lowest)), 0 (Best effort (default)), 2 (Excellent effort), 3 (Critical applications), 4 (Video, < 100ms latency), 5 (Video, < 10ms latency), 6 (Internetwork control) and 7 (Network control (highest)). Example of usage: root# ifconfig em0.1 create root# ifconfig em0.1 vlanpcp 3 Note: The review D801 includes the pf(4) part, but as discussed with kristof, we won't commit the pf(4) bits for now. The credits of the original code is from rwatson. Differential Revision: https://reviews.freebsd.org/D801 Reviewed by: gnn, adrian, loos Discussed with: rwatson, glebius, kristof Tested by: many including Matthew Grooms <mgrooms__shrew.net> Obtained from: pfSense Relnotes: Yes diff 261975 Sun Feb 16 10:33:28 MST 2014 brueffer Retire the nve(4) driver; nfe(4) has been the default driver for NVIDIA nForce MCP adapters for a long time. Yays: jhb, remko, yongari Nays: none on the current and stable lists diff 261975 Sun Feb 16 10:33:28 MST 2014 brueffer Retire the nve(4) driver; nfe(4) has been the default driver for NVIDIA nForce MCP adapters for a long time. Yays: jhb, remko, yongari Nays: none on the current and stable lists diff 255736 Fri Sep 20 18:26:33 MDT 2013 davidch Substantial rewrite of bxe(4) to add support for the BCM57712 and BCM578XX controllers. Approved by: re MFC after: 4 weeks diff 255736 Fri Sep 20 18:26:33 MDT 2013 davidch Substantial rewrite of bxe(4) to add support for the BCM57712 and BCM578XX controllers. Approved by: re MFC after: 4 weeks diff 226745 Tue Oct 25 17:21:39 MDT 2011 yongari axe(4) got VLAN over-sized frame support. Add axe(4) to the list of interfaces that support VLAN over-sized frame. diff 226745 Tue Oct 25 17:21:39 MDT 2011 yongari axe(4) got VLAN over-sized frame support. Add axe(4) to the list of interfaces that support VLAN over-sized frame.
H A D	mlx5ib.4	323218 Wed Sep 06 13:17:53 MDT 2017 hselasky MFC r322810 and r322830: Add new mlx5ib(4) driver to the kernel source tree which supports Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of PCI express network cards. There is currently no user-space support and this driver only supports kernel side non-routable RoCE V1. The krping kernel module can be used to test this driver. Full user-space support including RoCE V2 will be added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel module will only be built when WITH_OFED=YES is specified. Sponsored by: Mellanox Technologies 323218 Wed Sep 06 13:17:53 MDT 2017 hselasky MFC r322810 and r322830: Add new mlx5ib(4) driver to the kernel source tree which supports Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of PCI express network cards. There is currently no user-space support and this driver only supports kernel side non-routable RoCE V1. The krping kernel module can be used to test this driver. Full user-space support including RoCE V2 will be added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel module will only be built when WITH_OFED=YES is specified. Sponsored by: Mellanox Technologies 323218 Wed Sep 06 13:17:53 MDT 2017 hselasky MFC r322810 and r322830: Add new mlx5ib(4) driver to the kernel source tree which supports Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of PCI express network cards. There is currently no user-space support and this driver only supports kernel side non-routable RoCE V1. The krping kernel module can be used to test this driver. Full user-space support including RoCE V2 will be added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel module will only be built when WITH_OFED=YES is specified. Sponsored by: Mellanox Technologies 323218 Wed Sep 06 13:17:53 MDT 2017 hselasky MFC r322810 and r322830: Add new mlx5ib(4) driver to the kernel source tree which supports Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of PCI express network cards. There is currently no user-space support and this driver only supports kernel side non-routable RoCE V1. The krping kernel module can be used to test this driver. Full user-space support including RoCE V2 will be added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel module will only be built when WITH_OFED=YES is specified. Sponsored by: Mellanox Technologies
H A D	rctl.4	319630 Tue Jun 06 17:38:17 MDT 2017 trasz MFC r319076: Declutter rctl(8) by moving kernel build instructions into newly created rctl(4). Approved by: re (gjb)
/freebsd-11-stable/sys/modules/i2c/jedec_dimm/
H A D	Makefile	diff 330107 Wed Feb 28 10:10:02 MST 2018 rpokala MFC r329843: jedec_dimm(4): report asset info and temperatures for DDR3 and DDR4 DIMMs A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset information (Part Number, Serial Number) encoded in the "Serial Presence Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and reports the memory capacity of the DIMM, in megabytes. If the DIMM includes a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported. diff 330107 Wed Feb 28 10:10:02 MST 2018 rpokala MFC r329843: jedec_dimm(4): report asset info and temperatures for DDR3 and DDR4 DIMMs A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset information (Part Number, Serial Number) encoded in the "Serial Presence Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and reports the memory capacity of the DIMM, in megabytes. If the DIMM includes a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported. diff 330107 Wed Feb 28 10:10:02 MST 2018 rpokala MFC r329843: jedec_dimm(4): report asset info and temperatures for DDR3 and DDR4 DIMMs A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset information (Part Number, Serial Number) encoded in the "Serial Presence Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and reports the memory capacity of the DIMM, in megabytes. If the DIMM includes a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported. 329843 Thu Feb 22 23:22:01 MST 2018 rpokala jedec_dimm(4): report asset info and temperatures for DDR3 and DDR4 DIMMs A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset information (Part Number, Serial Number) encoded in the "Serial Presence Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and reports the memory capacity of the DIMM, in megabytes. If the DIMM includes a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported. Reviewed by: cem MFC after: 1 week Relnotes: yes Sponsored by: Panasas Differential Revision: https://reviews.freebsd.org/D14392 Discussed with: avg, cem Tested by: avg, cem (previous version, no semantic changes) 329843 Thu Feb 22 23:22:01 MST 2018 rpokala jedec_dimm(4): report asset info and temperatures for DDR3 and DDR4 DIMMs A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset information (Part Number, Serial Number) encoded in the "Serial Presence Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and reports the memory capacity of the DIMM, in megabytes. If the DIMM includes a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported. Reviewed by: cem MFC after: 1 week Relnotes: yes Sponsored by: Panasas Differential Revision: https://reviews.freebsd.org/D14392 Discussed with: avg, cem Tested by: avg, cem (previous version, no semantic changes) 329843 Thu Feb 22 23:22:01 MST 2018 rpokala jedec_dimm(4): report asset info and temperatures for DDR3 and DDR4 DIMMs A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset information (Part Number, Serial Number) encoded in the "Serial Presence Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and reports the memory capacity of the DIMM, in megabytes. If the DIMM includes a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported. Reviewed by: cem MFC after: 1 week Relnotes: yes Sponsored by: Panasas Differential Revision: https://reviews.freebsd.org/D14392 Discussed with: avg, cem Tested by: avg, cem (previous version, no semantic changes)
/freebsd-11-stable/sys/contrib/vchiq/interface/vchiq_arm/
H A D	vchiq_core.c	diff 305309 Fri Sep 02 16:14:24 MDT 2016 gonzo MFC r305104: Update VCHIQ driver to upstream version 4eda74f2 PR: 211525 Submitted by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
H A D	vchiq_arm.c	diff 305309 Fri Sep 02 16:14:24 MDT 2016 gonzo MFC r305104: Update VCHIQ driver to upstream version 4eda74f2 PR: 211525 Submitted by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
/freebsd-11-stable/contrib/libxo/libxo/
H A D	xo_options.7	322172 Mon Aug 07 17:28:05 MDT 2017 phil Import libxo-0.8.4 from HEAD into stable/11 Submitted by: phil
/freebsd-11-stable/sys/modules/le/
H A D	Makefile	diff 319182 Tue May 30 04:15:24 MDT 2017 ngie MFC r314651,r318439,r318440: r314651: sys/modules: normalize .CURDIR-relative paths to SRCTOP This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 r318439: Normalize .PATH on SRCTOP This will help Jenkins dedupe 9 warnings between the static build and the module build of ipsec(4). Missed in SRCTOP conversion in r314651. MFC with: r314651 r318440: Normalize SYSDIR on SRCTOP instead of .CURDIR This is being done to simplify pathing for CFLAGS and source files. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. diff 158712 Wed May 17 19:25:23 MDT 2006 marius - Add C-bus and ISA front-ends for le(4) so it can actually replace lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP network cards as lnc(4) did and additionally a couple of PNP ones. Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S and is untested due to lack of such hardware, but given that's it's based on the respective lnc(4) and not too different from the ISA front-end it should be highly likely to work. - Remove the descriptions of le(4), which where converted from lnc(4), from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common one in sys/conf/NOTES. 155151 Tue Jan 31 20:34:13 MST 2006 marius Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now. 155151 Tue Jan 31 20:34:13 MST 2006 marius Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now. 155151 Tue Jan 31 20:34:13 MST 2006 marius Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now. 155151 Tue Jan 31 20:34:13 MST 2006 marius Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now. 155151 Tue Jan 31 20:34:13 MST 2006 marius Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now. 155151 Tue Jan 31 20:34:13 MST 2006 marius Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now. 155151 Tue Jan 31 20:34:13 MST 2006 marius Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now.
/freebsd-11-stable/sys/modules/usb/rue/
H A D	Makefile	diff 319182 Tue May 30 04:15:24 MDT 2017 ngie MFC r314651,r318439,r318440: r314651: sys/modules: normalize .CURDIR-relative paths to SRCTOP This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 r318439: Normalize .PATH on SRCTOP This will help Jenkins dedupe 9 warnings between the static build and the module build of ipsec(4). Missed in SRCTOP conversion in r314651. MFC with: r314651 r318440: Normalize SYSDIR on SRCTOP instead of .CURDIR This is being done to simplify pathing for CFLAGS and source files. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. diff 226154 Sat Oct 08 10:39:16 MDT 2011 marius - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h.
/freebsd-11-stable/share/vt/fonts/
H A D	INDEX.fonts	338917 Mon Sep 24 18:56:11 MDT 2018 emaste MFC r338573: Add vt(4) INDEX.fonts PR: 231237 Submitted by: Martin <martin.jakob@gmx.com> (original version)
/freebsd-11-stable/tests/sys/netmap/
H A D	Makefile	346256 Tue Apr 16 01:07:00 MDT 2019 ngie MFC r345644,r346061: r345644 (by olivier): Skip this test if if_tap module is not available PR: 236842 r346061: Polish netmap(4) testcases a bit 1. Not all kernels have netmap(4) support. Check for netmap(4) support before attempting to run the tests via the `PLAIN_REQUIRE_KERNEL_MODULE(..)` macro. 2. Libraries shouldn't be added to LDFLAGS; they should be added to LIBADD instead. This allows the build system to evaluate dependencies for sanity. 3. Sort some of the Makefile variables per bsd.README. 1., in particular, will resolve failures when running this testcase on kernels lacking netmap(4) support, e.g., the i386 GENERIC kernels on ^/stable/11 and ^/stable/12. PR: 237129 346256 Tue Apr 16 01:07:00 MDT 2019 ngie MFC r345644,r346061: r345644 (by olivier): Skip this test if if_tap module is not available PR: 236842 r346061: Polish netmap(4) testcases a bit 1. Not all kernels have netmap(4) support. Check for netmap(4) support before attempting to run the tests via the `PLAIN_REQUIRE_KERNEL_MODULE(..)` macro. 2. Libraries shouldn't be added to LDFLAGS; they should be added to LIBADD instead. This allows the build system to evaluate dependencies for sanity. 3. Sort some of the Makefile variables per bsd.README. 1., in particular, will resolve failures when running this testcase on kernels lacking netmap(4) support, e.g., the i386 GENERIC kernels on ^/stable/11 and ^/stable/12. PR: 237129 346256 Tue Apr 16 01:07:00 MDT 2019 ngie MFC r345644,r346061: r345644 (by olivier): Skip this test if if_tap module is not available PR: 236842 r346061: Polish netmap(4) testcases a bit 1. Not all kernels have netmap(4) support. Check for netmap(4) support before attempting to run the tests via the `PLAIN_REQUIRE_KERNEL_MODULE(..)` macro. 2. Libraries shouldn't be added to LDFLAGS; they should be added to LIBADD instead. This allows the build system to evaluate dependencies for sanity. 3. Sort some of the Makefile variables per bsd.README. 1., in particular, will resolve failures when running this testcase on kernels lacking netmap(4) support, e.g., the i386 GENERIC kernels on ^/stable/11 and ^/stable/12. PR: 237129 346256 Tue Apr 16 01:07:00 MDT 2019 ngie MFC r345644,r346061: r345644 (by olivier): Skip this test if if_tap module is not available PR: 236842 r346061: Polish netmap(4) testcases a bit 1. Not all kernels have netmap(4) support. Check for netmap(4) support before attempting to run the tests via the `PLAIN_REQUIRE_KERNEL_MODULE(..)` macro. 2. Libraries shouldn't be added to LDFLAGS; they should be added to LIBADD instead. This allows the build system to evaluate dependencies for sanity. 3. Sort some of the Makefile variables per bsd.README. 1., in particular, will resolve failures when running this testcase on kernels lacking netmap(4) support, e.g., the i386 GENERIC kernels on ^/stable/11 and ^/stable/12. PR: 237129
/freebsd-11-stable/libexec/hyperv/
H A D	Makefile	diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635 diff 322134 Mon Aug 07 02:54:11 MDT 2017 sephe MFC 321762 hyperv: Add VF bringup scripts and devd rules. How network VF works with hn(4) on Hyper-V in non-transparent mode: - Each network VF has a cooresponding hn(4). - The network VF and the it's cooresponding hn(4) have the same hardware address. - Once the network VF is up, e.g. ifconfig VF up: o All of the transmission should go through the network VF. o Most of the reception goes through the network VF. o Small amount of reception may go through the cooresponding hn(4). This reception will happen, even if the the cooresponding hn(4) is down. The cooresponding hn(4) will change the reception interface to the network VF, so that network layer and application layer will be tricked into thinking that these packets were received by the network VF. o The cooresponding hn(4) pretends the physical link is down. - Once the network VF is down or detached: o All of the transmission should go through the cooresponding hn(4). o All of the reception goes through the cooresponding hn(4). o The cooresponding hn(4) fallbacks to the original physical link detection logic. All these features are mainly used to help live migration, during which the network VF will be detached, while the network communication to the VM must not be cut off. In order to reach this level of live migration transparency, we use failover mode lagg(4) with the network VF and the cooresponding hn(4) attached to it. To ease user configuration for both network VF and non-network VF, the lagg(4) will be created by the following rules, and the configuration of the cooresponding hn(4) will be applied to the lagg(4) automatically. Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D11635

Completed in 704 milliseconds

1234567891011>>