Searched hist:331586 (Results 1 - 19 of 19) sorted by relevance
/freebsd-11-stable/tools/build/options/ | ||
H A D | WITHOUT_MLX5TOOL | 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
H A D | WITH_MLX5TOOL | 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/usr.sbin/mlx5tool/ | ||
H A D | Makefile | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
H A D | mlx5tool.8 | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/share/man/man4/ | ||
H A D | mlx5io.4 | 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
H A D | Makefile | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/sys/dev/mlx5/ | ||
H A D | mlx5io.h | 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
H A D | driver.h | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/sys/modules/mlx5/ | ||
H A D | Makefile | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/sys/dev/mlx5/mlx5_core/ | ||
H A D | mlx5_fwdump.c | 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
H A D | mlx5_core.h | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
H A D | mlx5_main.c | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/usr.sbin/ | ||
H A D | Makefile | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/targets/pseudo/userland/ | ||
H A D | Makefile.depend | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/etc/mtree/ | ||
H A D | BSD.include.dist | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/share/man/man5/ | ||
H A D | src.conf.5 | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/include/ | ||
H A D | Makefile | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/share/mk/ | ||
H A D | src.opts.mk | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
/freebsd-11-stable/sys/conf/ | ||
H A D | files | diff 331586 Mon Mar 26 21:01:43 MDT 2018 hselasky MFC r330653: Add kernel and userspace code to dump the firmware state of supported ConnectX-4/5 devices in mlx5core. The dump is obtained by reading a predefined register map from the non-destructive crspace, accessible by the vendor-specific PCIe capability (VSC). The dump is stored in preallocated kernel memory and managed by the mlx5tool(8), which communicates with the driver using a character device node. The utility allows to store the dump in format <address> <value> into a file, to reset the dump content, and to manually initiate the dump. A call to mlx5_fwdump() should be added at the places where a dump must be fetched automatically. The most likely place is right before a firmware reset request. Submitted by: kib@ Sponsored by: Mellanox Technologies |
Completed in 645 milliseconds