Searched hist:302339 (Results 1 - 15 of 15) sorted by relevance
/freebsd-11-stable/sys/dev/cxgbe/cxgbei/ | ||
H A D | cxgbei.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | icl_cxgbei.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
/freebsd-11-stable/sys/dev/cxgbe/ | ||
H A D | t4_l2t.h | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | t4_l2t.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | adapter.h | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | t4_sge.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | t4_main.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
/freebsd-11-stable/sys/dev/cxgbe/iw_cxgbe/ | ||
H A D | device.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | iw_cxgbe.h | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | cm.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
/freebsd-11-stable/sys/dev/cxgbe/tom/ | ||
H A D | t4_ddp.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | t4_connect.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | t4_tom.h | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | t4_cpl_io.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
H A D | t4_tom.c | diff 302339 Mon Jul 04 23:36:27 MDT 2016 np cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications |
Completed in 427 milliseconds