Searched hist:286810 (Results 1 - 10 of 10) sorted by relevance
/freebsd-10-stable/sys/net/ | ||
H A D | sff8436.h | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
H A D | sff8472.h | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
H A D | if.h | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
/freebsd-10-stable/sbin/ifconfig/ | ||
H A D | ifconfig.h | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
H A D | sfp.c | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
H A D | ifconfig.c | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
H A D | Makefile | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
/freebsd-10-stable/sys/sys/ | ||
H A D | sockio.h | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
/freebsd-10-stable/sys/dev/ixgbe/ | ||
H A D | ixgbe.h | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
H A D | if_ix.c | diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC diff 286810 Sat Aug 15 16:08:57 MDT 2015 melifaro MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014, r271524,r273541,r282967,r283009,r283364. Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only. Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers * Add new net/sff8436.h containing constants used to access QSFP+ data via i2c inteface. These constants has been taken from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard rev 4.8. * Add support for printing QSFP+ information from 40G NICs such as Chelsio T5. Example: cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....> ether 00:07:43:28:ad:08 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 40Gbase-LR4 <full-duplex> status: active plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic) vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18 module temperature: 64.06 C voltage: 3.26 Volts lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm) lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm) lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm) lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm) Tested on: Chelsio T5 Tested on: Mellanox/Huawei passive/active cables/transceivers. Sponsored by: Yandex LLC |
Completed in 203 milliseconds