Searched hist:268953 (Results 1 - 25 of 26) sorted by relevance
| /freebsd-10-stable/sys/boot/userboot/userboot/ | ||
| H A D | userboot_cons.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | conf.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| /freebsd-10-stable/sys/amd64/vmm/intel/ | ||
| H A D | vmx_genassym.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | vmx_support.S | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | vmcs.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | vmcs.h | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | vmx.h | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | vmx.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| /freebsd-10-stable/usr.sbin/bhyve/ | ||
| H A D | mevent.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | uart_emul.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | pci_passthru.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | pci_virtio_rnd.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | xmsr.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | inout.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | bhyve.8 | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | pci_virtio_net.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | block_if.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | pci_virtio_block.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | pci_emul.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | pci_ahci.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| /freebsd-10-stable/sys/amd64/vmm/ | ||
| H A D | vmm_lapic.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | vmm_ioport.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| /freebsd-10-stable/sys/amd64/vmm/io/ | ||
| H A D | vlapic.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| /freebsd-10-stable/lib/libvmmapi/ | ||
| H A D | vmmapi.h | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
| H A D | vmmapi.c | diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. diff 268953 Mon Jul 21 17:23:14 MDT 2014 jhb MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked. |
Completed in 570 milliseconds