Searched hist:262903 (Results 1 - 25 of 37) sorted by relevance
/freebsd-10.3-release/sys/arm/freescale/vybrid/ | ||
H A D | vf_dcu4.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | vf_port.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | vf_port.h | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | vf_gpio.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sbin/newfs_nandfs/ | ||
H A D | newfs_nandfs.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sys/arm/allwinner/ | ||
H A D | a10_clk.h | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | a10_gpio.h | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | a10_sramc.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | a10_sramc.h | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | if_emac.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | if_emacreg.h | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | a10_clk.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | a10_gpio.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | files.a10 | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sys/boot/fdt/dts/arm/ | ||
H A D | vybrid-quartz.dts | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | cubieboard.dts | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | cubieboard2.dts | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | vybrid.dtsi | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sys/dev/ffec/ | ||
H A D | if_ffec.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sys/arm/freescale/imx/ | ||
H A D | imx6_mp.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sys/arm/ti/omap4/ | ||
H A D | omap4_prcm_clks.c | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sys/arm/allwinner/a20/ | ||
H A D | files.a20 | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
/freebsd-10.3-release/sys/arm/conf/ | ||
H A D | CUBIEBOARD2 | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | DEFAULTS | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
H A D | DIGI-CCWMX53 | diff 266274 Fri May 16 23:32:56 MDT 2014 ian MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880, 262885, 262891, 262903, imx6: Add a tunable to set the number of active cores, enable SMP by default. ffec: Fix multicast filtering. Allwinner a10/a20... - Add gpio and clock bits for A10/A20's EMAC ethernet controller driver - EMAC gpio configuration - EMAC clock activation - Add Static Random Access Memory controller driver for A10/A20. A10/A20's SRAM is used by devices, such as CPU, EMAC, for extra fast memory or as cache. - Add EMAC 10/100 Ethernet controller driver for A10/A20. It is available mostly in A10 devices like Hackberry, Marsboard, Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device like cubieboard2. TX performance can be improved using both channels 0 and 1. RX performance is poor and needs improvement with the assistance of external DMA controller in case there - Add EMAC and SRAM controller entries to FDT. - Add EMAC device to kernel config files and enable EMAC, SRAM drivers. OMAP: When calculating the MPU freq, make sure not to overflow. Vybrid: - Add driver for Port control and interrupts (PORT). - Export panel info to DTS - Reset all the layers before setup first one - Enable display nandfs: Slight code reordering to make error branch last. Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels. Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a struct sigframe containing the struct ucontext. |
Completed in 187 milliseconds