Searched hist:8023 (Results 1 - 25 of 38) sorted by relevance

12

/linux-master/tools/include/uapi/linux/
H A D	vhost.h	diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> diff f64925c1 Wed Jun 17 07:16:53 MDT 2020 Arnaldo Carvalho de Melo <acme@redhat.com> tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
/linux-master/arch/arm/kernel/
H A D	stacktrace.c	diff 40ff1ddb Mon Dec 16 03:48:28 MST 2019 Vincent Whitchurch <vincent.whitchurch@axis.com> ARM: 8948/1: Prevent OOB access in stacktrace The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> diff 40ff1ddb Mon Dec 16 03:48:28 MST 2019 Vincent Whitchurch <vincent.whitchurch@axis.com> ARM: 8948/1: Prevent OOB access in stacktrace The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> diff 40ff1ddb Mon Dec 16 03:48:28 MST 2019 Vincent Whitchurch <vincent.whitchurch@axis.com> ARM: 8948/1: Prevent OOB access in stacktrace The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
H A D	traps.c	diff 40ff1ddb Mon Dec 16 03:48:28 MST 2019 Vincent Whitchurch <vincent.whitchurch@axis.com> ARM: 8948/1: Prevent OOB access in stacktrace The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> diff 40ff1ddb Mon Dec 16 03:48:28 MST 2019 Vincent Whitchurch <vincent.whitchurch@axis.com> ARM: 8948/1: Prevent OOB access in stacktrace The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> diff 40ff1ddb Mon Dec 16 03:48:28 MST 2019 Vincent Whitchurch <vincent.whitchurch@axis.com> ARM: 8948/1: Prevent OOB access in stacktrace The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
/linux-master/drivers/net/wireless/ath/ath11k/
H A D	hal_desc.h	diff 2167fa60 Mon Sep 27 15:05:40 MDT 2021 Sriram R <srirrama@codeaurora.org> ath11k: Add support for RX decapsulation offload Add support for rx decapsulation offload by advertising the support to mac80211 during registration. Also ensure the frames have the RX_FLAG_8023 flag set in decap offload frames before passing to mac80211. Since the packets delivered to the driver are in 802.3 format, these can be sent to the network core with minimal processing in mac80211. This helps in releasing some CPU cycles in the host processor and thereby improving the performance. Two exceptions are made before passing decap frames, one is for EAPOL packets since mac80211 8023 fast rx for the sta is set only after authorization, other case is for multicast packets to validate PN in mac80211. In both the cases the decap frames are converted to 80211 frame and sent to mac80211. Ethernet decap can be enabled by using frame_mode modparam: insmod ath11k frame_mode=2 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00844-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721204217.120572-1-jouni@codeaurora.org
H A D	hw.c	diff 2167fa60 Mon Sep 27 15:05:40 MDT 2021 Sriram R <srirrama@codeaurora.org> ath11k: Add support for RX decapsulation offload Add support for rx decapsulation offload by advertising the support to mac80211 during registration. Also ensure the frames have the RX_FLAG_8023 flag set in decap offload frames before passing to mac80211. Since the packets delivered to the driver are in 802.3 format, these can be sent to the network core with minimal processing in mac80211. This helps in releasing some CPU cycles in the host processor and thereby improving the performance. Two exceptions are made before passing decap frames, one is for EAPOL packets since mac80211 8023 fast rx for the sta is set only after authorization, other case is for multicast packets to validate PN in mac80211. In both the cases the decap frames are converted to 80211 frame and sent to mac80211. Ethernet decap can be enabled by using frame_mode modparam: insmod ath11k frame_mode=2 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00844-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721204217.120572-1-jouni@codeaurora.org
H A D	dp_rx.c	diff 2167fa60 Mon Sep 27 15:05:40 MDT 2021 Sriram R <srirrama@codeaurora.org> ath11k: Add support for RX decapsulation offload Add support for rx decapsulation offload by advertising the support to mac80211 during registration. Also ensure the frames have the RX_FLAG_8023 flag set in decap offload frames before passing to mac80211. Since the packets delivered to the driver are in 802.3 format, these can be sent to the network core with minimal processing in mac80211. This helps in releasing some CPU cycles in the host processor and thereby improving the performance. Two exceptions are made before passing decap frames, one is for EAPOL packets since mac80211 8023 fast rx for the sta is set only after authorization, other case is for multicast packets to validate PN in mac80211. In both the cases the decap frames are converted to 80211 frame and sent to mac80211. Ethernet decap can be enabled by using frame_mode modparam: insmod ath11k frame_mode=2 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00844-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721204217.120572-1-jouni@codeaurora.org
H A D	hw.h	diff 2167fa60 Mon Sep 27 15:05:40 MDT 2021 Sriram R <srirrama@codeaurora.org> ath11k: Add support for RX decapsulation offload Add support for rx decapsulation offload by advertising the support to mac80211 during registration. Also ensure the frames have the RX_FLAG_8023 flag set in decap offload frames before passing to mac80211. Since the packets delivered to the driver are in 802.3 format, these can be sent to the network core with minimal processing in mac80211. This helps in releasing some CPU cycles in the host processor and thereby improving the performance. Two exceptions are made before passing decap frames, one is for EAPOL packets since mac80211 8023 fast rx for the sta is set only after authorization, other case is for multicast packets to validate PN in mac80211. In both the cases the decap frames are converted to 80211 frame and sent to mac80211. Ethernet decap can be enabled by using frame_mode modparam: insmod ath11k frame_mode=2 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00844-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721204217.120572-1-jouni@codeaurora.org
/linux-master/drivers/net/ethernet/marvell/octeontx2/af/
H A D	lmac_common.h	diff e7400038 Tue Feb 08 12:15:18 MST 2022 Hariprasad Kelam <hkelam@marvell.com> octeontx2-af: Flow control resource management CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
H A D	rpm.h	diff e7400038 Tue Feb 08 12:15:18 MST 2022 Hariprasad Kelam <hkelam@marvell.com> octeontx2-af: Flow control resource management CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
H A D	rpm.c	diff e7400038 Tue Feb 08 12:15:18 MST 2022 Hariprasad Kelam <hkelam@marvell.com> octeontx2-af: Flow control resource management CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
H A D	cgx.h	diff e7400038 Tue Feb 08 12:15:18 MST 2022 Hariprasad Kelam <hkelam@marvell.com> octeontx2-af: Flow control resource management CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
H A D	cgx.c	diff e7400038 Tue Feb 08 12:15:18 MST 2022 Hariprasad Kelam <hkelam@marvell.com> octeontx2-af: Flow control resource management CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
H A D	rvu_cgx.c	diff e7400038 Tue Feb 08 12:15:18 MST 2022 Hariprasad Kelam <hkelam@marvell.com> octeontx2-af: Flow control resource management CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
/linux-master/drivers/spi/
H A D	spi-coldfire-qspi.c	diff 8023d384 Thu Mar 20 08:59:06 MDT 2014 Axel Lin <axel.lin@ingics.com> spi: coldfire-qspi: Simplify the code to set register bits for transfer speed spi core will use spi->max_speed_hz as transfer speed if the transfer speed was not set. So we don't need to test t->speed_hz in mcfqspi_transfer_one(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
/linux-master/arch/x86/kernel/
H A D	unwind_frame.c	diff 87a6b297 Mon Mar 13 22:27:47 MDT 2017 Josh Poimboeuf <jpoimboe@redhat.com> x86/unwind: Fix last frame check for aligned function stacks Pavel Machek reported the following warning on x86-32: WARNING: kernel stack frame pointer at f50cdf98 in swapper/2:0 has bad value (null) The warning is caused by the unwinder not realizing that it reached the end of the stack, due to an unusual prologue which gcc sometimes generates for aligned stacks. The prologue is based on a gcc feature called the Dynamic Realign Argument Pointer (DRAP). It's almost always enabled for aligned stacks when -maccumulate-outgoing-args isn't set. This issue is similar to the one fixed by the following commit: 8023e0e2a48d ("x86/unwind: Adjust last frame check for aligned function stacks") ... but that fix was specific to x86-64. Make the fix more generic to cover x86-32 as well, and also ensure that the return address referred to by the frame pointer is a copy of the original return address. Fixes: acb4608ad186 ("x86/unwind: Create stack frames for saved syscall registers") Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/50d4924db716c264b14f1633037385ec80bf89d2.1489465609.git.jpoimboe@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> diff 8023e0e2 Fri Dec 16 09:05:05 MST 2016 Josh Poimboeuf <jpoimboe@redhat.com> x86/unwind: Adjust last frame check for aligned function stacks Somehow, CONFIG_PARAVIRT=n convinces gcc to change the x86_64_start_kernel() prologue from: 0000000000000129 <x86_64_start_kernel>: 129: 55 push %rbp 12a: 48 89 e5 mov %rsp,%rbp to: 0000000000000124 <x86_64_start_kernel>: 124: 4c 8d 54 24 08 lea 0x8(%rsp),%r10 129: 48 83 e4 f0 and $0xfffffffffffffff0,%rsp 12d: 41 ff 72 f8 pushq -0x8(%r10) 131: 55 push %rbp 132: 48 89 e5 mov %rsp,%rbp This is an unusual pattern which aligns rsp (though in this case it's already aligned) and saves the start_cpu() return address again on the stack before storing the frame pointer. The unwinder assumes the last stack frame header is at a certain offset, but the above code breaks that assumption, resulting in the following warning: WARNING: kernel stack frame pointer at ffffffff82e03f40 in swapper:0 has bad value (null) Fix it by checking for the last task stack frame at the aligned offset in addition to the normal unaligned offset. Fixes: acb4608ad186 ("x86/unwind: Create stack frames for saved syscall registers") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/9d7b4eb8cf55a7d6002cb738f25c23e7429c99a0.1481904011.git.jpoimboe@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
/linux-master/drivers/platform/x86/
H A D	asus-wmi.h	diff 8023eff1 Thu Sep 01 09:55:55 MDT 2016 Kai-Chuan Hsieh <kai.chiuan@gmail.com> platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB The bluetooth adapter Atheros AR3012 can't be enumerated and make the bluetooth function broken. T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb The error is: usb 2-6: device not accepting address 7, error -62 usb usb2-port6: unable to enumerate USB device It is caused by adapter's connected port is mapped to xHC controller, but the xHCI is not supported by the usb device. The output of 'sudo lspci -nnxxx -s 00:14.0': 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) 00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00 10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00 40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00 50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00 d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00 e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00 f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00 By referencing Intel Platform Controller Hub(PCH) datasheet, the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h decides the setting of mapping the port to EHCI controller or xHC controller. And the port mapped to xHC will enable xHCI during bus resume. The setting of disabling bluetooth adapter's connected port is 0x000001D9. The value can be obtained by few times 1 bit flip operation. The suited configuration should have the 'lsusb -t' result with bluetooth using ehci: /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com> Acked-by: Corentin Chary <corentin.chary@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [andy: resolve merge conflict in asus-wmi.h] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
H A D	asus-nb-wmi.c	diff 8023eff1 Thu Sep 01 09:55:55 MDT 2016 Kai-Chuan Hsieh <kai.chiuan@gmail.com> platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB The bluetooth adapter Atheros AR3012 can't be enumerated and make the bluetooth function broken. T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb The error is: usb 2-6: device not accepting address 7, error -62 usb usb2-port6: unable to enumerate USB device It is caused by adapter's connected port is mapped to xHC controller, but the xHCI is not supported by the usb device. The output of 'sudo lspci -nnxxx -s 00:14.0': 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) 00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00 10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00 40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00 50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00 d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00 e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00 f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00 By referencing Intel Platform Controller Hub(PCH) datasheet, the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h decides the setting of mapping the port to EHCI controller or xHC controller. And the port mapped to xHC will enable xHCI during bus resume. The setting of disabling bluetooth adapter's connected port is 0x000001D9. The value can be obtained by few times 1 bit flip operation. The suited configuration should have the 'lsusb -t' result with bluetooth using ehci: /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com> Acked-by: Corentin Chary <corentin.chary@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [andy: resolve merge conflict in asus-wmi.h] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
/linux-master/drivers/mmc/host/
H A D	sdhci_am654.c	diff 8023cf26 Tue May 28 03:59:27 MDT 2019 Faiz Abbas <faiz_abbas@ti.com> mmc: sdhci_am654: Improve whitespace utilisation with regmap_*() calls Line wrapping with the regmap_*() functions is way more conservative than required by the 80 character rule. Expand the function calls out to use less number of lines. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
/linux-master/drivers/net/wireless/ath/ath9k/
H A D	mac.h	diff 5882da02 Fri Apr 08 12:13:18 MDT 2011 Felix Fietkau <nbd@openwrt.org> ath9k_hw: fix stopping rx DMA during resets During PHY errors, the MAC can sometimes fail to enter an idle state on older hardware (before AR9380) after an rx stop has been requested. This typically shows up in the kernel log with messages like these: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]() Call Trace: [<8023f0e8>] dump_stack+0x8/0x34 [<80075050>] warn_slowpath_common+0x78/0xa4 [<80075094>] warn_slowpath_null+0x18/0x24 [<80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k] [<80d642cc>] ath_set_channel+0xbc/0x270 [ath9k] [<80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k] When this happens, the state that the MAC enters is easy to identify and does not result in bogus DMA traffic, however to ensure a working state after a channel change, the hardware should still be reset. This patch adds detection for this specific MAC state, after which the above warnings completely disappear in my tests. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Cc: Kyungwan Nam <Kyungwan.Nam@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
H A D	mac.c	diff 5882da02 Fri Apr 08 12:13:18 MDT 2011 Felix Fietkau <nbd@openwrt.org> ath9k_hw: fix stopping rx DMA during resets During PHY errors, the MAC can sometimes fail to enter an idle state on older hardware (before AR9380) after an rx stop has been requested. This typically shows up in the kernel log with messages like these: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]() Call Trace: [<8023f0e8>] dump_stack+0x8/0x34 [<80075050>] warn_slowpath_common+0x78/0xa4 [<80075094>] warn_slowpath_null+0x18/0x24 [<80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k] [<80d642cc>] ath_set_channel+0xbc/0x270 [ath9k] [<80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k] When this happens, the state that the MAC enters is easy to identify and does not result in bogus DMA traffic, however to ensure a working state after a channel change, the hardware should still be reset. This patch adds detection for this specific MAC state, after which the above warnings completely disappear in my tests. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Cc: Kyungwan Nam <Kyungwan.Nam@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
/linux-master/drivers/gpu/drm/i915/display/
H A D	intel_drrs.c	diff 8023d3be Thu Jan 27 15:37:41 MST 2022 Ville Syrjälä <ville.syrjala@linux.intel.com> drm/i915: Nuke intel_dp_set_m_n() I want to make a clean split betwen the CPU vs. PCH transcoder programming. To that end eliminate intel_dp_set_m_n() and just call the individual CPU/PCH transcoder functions directly. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
H A D	intel_display.h	diff 8023d3be Thu Jan 27 15:37:41 MST 2022 Ville Syrjälä <ville.syrjala@linux.intel.com> drm/i915: Nuke intel_dp_set_m_n() I want to make a clean split betwen the CPU vs. PCH transcoder programming. To that end eliminate intel_dp_set_m_n() and just call the individual CPU/PCH transcoder functions directly. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
/linux-master/arch/arm/include/asm/
H A D	memory.h	diff 64d3b6a3 Wed Apr 09 14:24:02 MDT 2014 Nicolas Pitre <nico@fluxnic.net> ARM: 8023/1: remove remnants of the static DMA mapping It looks like the static mapping area for DMA was replaced by dynamic allocation into the vmalloc area by commit e9da6e9905e6 but the information in Documentation/arm/memory.txt was not removed accordingly. CONSISTENT_END in arch/arm/include/asm/memory.h has no more users and can be removed as well. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
/linux-master/drivers/net/bonding/
H A D	bond_options.c	diff fe9d04af Fri Nov 22 07:28:43 MST 2013 dingtianhong <dingtianhong@huawei.com> bonding: disable arp and enable mii monitoring when bond change to no uses arp mode Because the ARP monitoring is not support for 802.3ad, but I still could change the mode to 802.3ad from ab mode while ARP monitoring is running, it is incorrect. So add a check for 802.3ad in bonding_store_mode to fix the problem, and make a new macro BOND_NO_USES_ARP() to simplify the code. v2: according to the Dan Williams's suggestion, bond mode is the most important bond option, it should override any of the other sub-options. So when the mode is changed, the conficting values should be cleared or reset, otherwise the user has to duplicate more operations to modify the logic. I disable the arp and enable mii monitoring when the bond mode is changed to AB, TB and 8023AD if the arp interval is true. v3: according to the Nik's suggestion, the default value of miimon should need a name, there is several place to use it, and the bond_store_arp_interval() could use micro BOND_NO_USES_ARP to make the code more simpify. Suggested-by: Dan Williams <dcbw@redhat.com> Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
H A D	bond_sysfs.c	diff fe9d04af Fri Nov 22 07:28:43 MST 2013 dingtianhong <dingtianhong@huawei.com> bonding: disable arp and enable mii monitoring when bond change to no uses arp mode Because the ARP monitoring is not support for 802.3ad, but I still could change the mode to 802.3ad from ab mode while ARP monitoring is running, it is incorrect. So add a check for 802.3ad in bonding_store_mode to fix the problem, and make a new macro BOND_NO_USES_ARP() to simplify the code. v2: according to the Dan Williams's suggestion, bond mode is the most important bond option, it should override any of the other sub-options. So when the mode is changed, the conficting values should be cleared or reset, otherwise the user has to duplicate more operations to modify the logic. I disable the arp and enable mii monitoring when the bond mode is changed to AB, TB and 8023AD if the arp interval is true. v3: according to the Nik's suggestion, the default value of miimon should need a name, there is several place to use it, and the bond_store_arp_interval() could use micro BOND_NO_USES_ARP to make the code more simpify. Suggested-by: Dan Williams <dcbw@redhat.com> Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Completed in 1068 milliseconds

12

Indexes created Sat May 11 20:17:00 MDT 2024