Searched hist:330976 (Results 1 - 9 of 9) sorted by relevance
| /freebsd-11-stable/usr.sbin/makefs/ffs/ | ||
| H A D | Makefile.inc | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| H A D | mkfs.c | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| /freebsd-11-stable/usr.sbin/makefs/ | ||
| H A D | ffs.h | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| H A D | Makefile | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| H A D | cd9660.c | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| H A D | makefs.c | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| H A D | makefs.8 | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| H A D | ffs.c | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
| /freebsd-11-stable/usr.sbin/makefs/cd9660/ | ||
| H A D | Makefile.inc | diff 330976 Thu Mar 15 09:17:56 MDT 2018 eadler MFC r303036,r303038,r306822,r307923,: makefs: reorder 'usage' alphabetically From NetBSD, Mon Aug 15 14:45:01 2011 +0000 (wiz) Re-order `usage' alphabetically; rename option arguments in the manpage's `SYNOPSIS' section to match those from `usage' (not the other way around; the `usage'-line (and other parts of makefs.c) contain the correct names); minor punctuation improvements. From Snader_LB. makefs.8 1.36 makefs.c 1.30 Obtained from: NetBSD ------------------------------------------------------------------------ r303038 | emaste | 2016-07-19 18:40:54 +0000 (Tue, 19 Jul 2016) | 56 lines makefs: sync NetBSD IDs with upstream for changes that we already have May 22 21:51:39 2011 +0000 (christos): From Nathan Whitehorn (nwhitehorn at freebsd dot org): Add code to generate bootable ISOs on Powermac and CHRP systems. Synthesize some partition maps (APM and MBR, respectively) pointing to (a) the whole disk, and (b) relevant El Torito boot images that have been added by other code. These partition maps are a little bit funny looking, but they seem to work. FreeBSD has been using this successfully in their release generation on powerpc, as well as generating all non-SPARC install media. SPARC support could probably be added as an extension of this patch. makefs.8 1.33 Tue Aug 23 17:09:11 2011 +0000 (christos): PR/45285: Martin Matuska: makefs does not properly convert ISO level 1 and 2 filenames (buffer overflow) makefs does not properly verify the maximum filename length in the special "." case for both ISO level 1 and ISO level 2 filename conversion. This creates broken images or causes a buffer overflow (ISO level 2). ISO level 1: If a filename contains only dots or up to 8 characters followed by dots the 8+3 limit check doesn't work. ISO level 2: If a filename contains a dot in the first 30 characters and a dot on the 30th character, the length limit check doesn't work and the buffer is overflowed. $ mkdir level1 $ touch level1/12345............ $ makefs -t cd9660 -o isolevel=1 test.iso level1 $ mkdir level2 $ touch level2/1234567890.2345678901234567.....34567890123456789012345 $ makefs -t cd9660 -o isolevel=2 test.iso level2 cd9660.c 1.32 Sun Oct 9 21:33:43 2011 +0000 (christos): add support for setting the ufs label. (Nathan Whitehorn) ffs.c 1.45 ffs.h 1.2 mkfs.c 1.22 makefs.8 1.37 Obtained from: NetBSD ------------------------------------------------------------------------ r306822 | emaste | 2016-10-07 19:12:15 +0000 (Fri, 07 Oct 2016) | 4 lines makefs: diff reduction with NetBSD Obtained from: NetBSD usr.sbin/makefs/cd9660.c 1.33 ------------------------------------------------------------------------ r307923 | marcel | 2016-10-25 16:21:38 +0000 (Tue, 25 Oct 2016) | 7 lines Allow building makefs(8) from another Makefile (such as one in a seperate directory hierarchy used to build tools). This boils down to replacing the use of ${.CURDIR} with either ${SRCDIR} or ${SRCTOP}. SRCDIR is defined as the directory in which the Makefile lives that bmake(1) is currently reading. Use SRCTOP when reaching outside of makefs's directory. |
Completed in 112 milliseconds