Lines Matching refs:SIR
79 MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
102 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
120 unsigned short sir_io; /* I/O port for SIR */
283 #define SIR 0 /* SuperIO Chip has only slow IRDA */
293 { "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 },
294 { "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */
304 { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 },
305 { "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 },
306 { "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 },
307 { "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 },
309 { "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 },
310 { "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 },
312 { "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 },
313 { "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 },
332 { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 },
333 { "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 },
334 { "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
336 { "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
337 { "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 },
339 { "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 },
428 IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
899 * We send frames one by one in SIR mode (no
1511 /* Check if we should use the SIR interrupt handler */
1559 * Interrupt handler for SIR modes
1859 * Start SIR operations
1920 * Called by the SIR interrupt handler when there's room for more data.
2213 /* SIR iobase */
2362 * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
2492 * (FIR port, SIR port, FIR DMA, FIR IRQ)
2509 /* Disable UART1 and set up SIR I/O port */
2516 IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
2606 * Select the range for the COMA COM port (SIR)