Lines Matching refs:LOGNAME
59 # define LOGNAME "msnd_classic"
65 # define LOGNAME "msnd_pinnacle"
687 printk(KERN_DEBUG LOGNAME ": Stopping read for %p\n", file);
699 printk(KERN_DEBUG LOGNAME ": Stopping write for %p\n", file);
720 printk(KERN_DEBUG LOGNAME ": Starting write for %p\n", file);
731 printk(KERN_DEBUG LOGNAME ": Starting read for %p\n", file);
1067 /* printk(KERN_DEBUG LOGNAME ": Play underflow\n"); */
1072 /* printk(KERN_DEBUG LOGNAME ": Record overflow\n"); */
1077 /* printk(KERN_DEBUG LOGNAME ": DSP message %d 0x%02x\n",
1089 /* printk(KERN_DEBUG LOGNAME ": HIMT message %d 0x%02x\n", HIBYTE(wMessage), HIBYTE(wMessage)); */
1138 printk(KERN_ERR LOGNAME ": Cannot reset DSP\n");
1152 printk(KERN_ERR LOGNAME ": I/O port conflict\n");
1163 printk(KERN_INFO LOGNAME ": %s, "
1186 printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, "
1288 printk(KERN_WARNING LOGNAME ": ADC calibration failed\n");
1299 printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE);
1305 printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE);
1312 printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n");
1316 printk(KERN_INFO LOGNAME ": DSP firmware uploaded (resident)\n");
1318 printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n");
1350 printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n");
1358 printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n");
1366 printk(KERN_DEBUG LOGNAME ": DSP reset timeout\n");
1384 printk(KERN_INFO LOGNAME ": DSP reset\n");
1387 printk(KERN_WARNING LOGNAME ": DSP reset failed\n");
1400 printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", dev.irq);
1416 printk(KERN_ERR LOGNAME ": Unable to register MultiSound\n");
1423 printk(KERN_ERR LOGNAME ": Unable to register DSP operations\n");
1431 printk(KERN_ERR LOGNAME ": Unable to register mixer operations\n");
1468 printk(KERN_ERR LOGNAME ": msnd_write_cfg: I/O error\n");
1562 printk(KERN_INFO LOGNAME ": Resetting all devices\n");
1579 printk(KERN_INFO LOGNAME
1586 printk(KERN_INFO LOGNAME
1593 printk(KERN_INFO LOGNAME
1743 printk(KERN_INFO LOGNAME ": Turtle Beach " LONGNAME " Linux Driver Version "
1747 printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n");
1759 printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set to 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x290, or 0x3E0\n");
1767 printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must within the range 0x100 to 0x3E0 and must be evenly divisible by 0x10\n");
1779 printk(KERN_ERR LOGNAME ": \"irq\" - must be set to 5, 7, 9, 10, 11 or 12\n");
1790 printk(KERN_ERR LOGNAME ": \"mem\" - must be set to "
1815 printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
1817 printk(KERN_INFO LOGNAME ": Config port must be 0x250, 0x260 or 0x270 (or unspecified for PnP mode)\n");
1820 printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%x\n", cfg);
1842 printk(KERN_ERR LOGNAME ": Config port 0x%x conflict\n", cfg);
1847 printk(KERN_ERR LOGNAME ": Device configuration error\n");
1892 printk(KERN_INFO LOGNAME ": %u byte audio FIFOs (x2)\n", dev.fifosize);
1894 printk(KERN_ERR LOGNAME ": Couldn't allocate write FIFO\n");
1899 printk(KERN_ERR LOGNAME ": Couldn't allocate read FIFO\n");
1905 printk(KERN_ERR LOGNAME ": Probe failed\n");
1912 printk(KERN_ERR LOGNAME ": Attach failed\n");