Lines Matching defs:on
208 * If an GPIO interrupt is setup on this pin then we need special
212 * When we see a pin with an interrupt setup on it then we'll disable
213 * (mask) interrupts on it when we mux away until we mux back. Note
518 * can be enabled/disabled. It's always on.
865 * RAW_STATUS_EN bit causes the level or edge sensed on the line to be
878 * status register because the level is still present on the line after
880 * set the bit on unmask so the interrupt can't latch into the hardware
1106 * RAW_STATUS_EN is left on for all gpio irqs. Due to the
1182 static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
1190 * when TLMM is powered on. To allow that, enable the GPIO
1194 return irq_chip_set_wake_parent(d, on);
1196 return irq_set_irq_wake(pctrl->irq, on);