microchip/wilc1000/spi.c

178 			dev_err(&spi->dev, "missing reset gpio.\n");
329 			dev_err(&spi->dev, "SPI transaction failed\n");
333 		dev_err(&spi->dev,
371 			dev_err(&spi->dev, "SPI transaction failed\n");
374 		dev_err(&spi->dev,
407 			dev_err(&spi->dev, "SPI transaction failed\n");
409 		dev_err(&spi->dev,
450 			dev_err(&spi->dev,
460 			dev_err(&spi->dev,
474 				dev_err(&spi->dev, "Failed data block crc write, bus error...\n");
527 		dev_err(&spi->dev, "cmd [%x] not supported\n", cmd);
541 		dev_err(&spi->dev,
548 		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
555 			dev_err(&spi->dev,
562 		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
572 		dev_err(&spi->dev, "Error, data start missing\n");
585 			dev_err(&spi->dev, "%s: bad CRC 0x%04x "
628 		dev_err(&spi->dev, "write cmd [%x] not supported\n", cmd);
638 		dev_err(&spi->dev,
645 		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
655 		dev_err(&spi->dev,
662 		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
706 		dev_err(&spi->dev, "dma read write cmd [%x] not supported\n",
716 		dev_err(&spi->dev, "spi buffer size too small (%d)(%d) (%zu)\n",
722 		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
728 		dev_err(&spi->dev,
735 		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
755 				dev_err(&spi->dev,
767 			dev_err(&spi->dev,
777 				dev_err(&spi->dev,
784 				dev_err(&spi->dev, "%s: bad CRC 0x%04x "
825 		dev_err(&spi->dev, "spi buffer size too small (%d) (%d) (%zu)\n",
831 		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
838 			dev_err(&spi->dev,
845 		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
858 		dev_err(&spi->dev, "Reset and retry %d %x\n", attempt, addr);
890 		dev_err(&spi->dev, "Failed cmd, read reg (%08x)...\n", addr);
912 		dev_err(&spi->dev, "Failed cmd, read block (%08x)...\n", addr);
931 		dev_err(&spi->dev, "Failed internal write cmd...\n");
954 			dev_err(&spi->dev, "Failed internal read cmd...\n");
987 		dev_err(&spi->dev, "Failed cmd, write reg (%08x)...\n", addr);
1017 		dev_err(&spi->dev, "Failed bus error...\n");
1026 		dev_err(&spi->dev,
1036 		dev_err(&spi->dev, "Data response error (%02x %02x)\n",
1059 			dev_err(&spi->dev,
1070 			dev_err(&spi->dev, "Failed block data write...\n");
1080 			dev_err(&spi->dev, "Failed block data rsp...\n");
1103 		dev_err(&spi->dev, "Failed cmd reset\n");
1170 		dev_err(&spi->dev, "Failed with CRC7 on and off.\n");
1191 		dev_err(&spi->dev,
1219 		dev_err(&spi->dev, "Fail cmd read chip id...\n");
1223 		dev_err(&spi->dev, "Unknown chip id 0x%x\n", chipid);
1277 		dev_err(&spi->dev, "Too many interrupts (%d)...\n", nint);
1286 		dev_err(&spi->dev, "Failed read reg (%08x)...\n",
1293 		dev_err(&spi->dev, "Failed write reg (%08x)...\n",
1303 		dev_err(&spi->dev, "Failed read reg (%08x)...\n",
1313 		dev_err(&spi->dev, "Failed write reg (%08x)...\n",
1320 			dev_err(&spi->dev, "Failed read reg (%08x)...\n",
1330 			dev_err(&spi->dev, "Failed write reg (%08x)...\n",