ethernet/dlink/dl2k.c

269 	printk (KERN_INFO "%s: %s, %pM, IRQ %d\n",
272 		printk(KERN_INFO "tx_coalesce:\t%d packets\n",
275 		printk(KERN_INFO
280 		printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
660 		printk(KERN_INFO "Try to recover rx ring exhausted...\n");
671 					printk (KERN_INFO
697 	printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n",
994 				printk (KERN_INFO
1025 			printk (KERN_INFO "%s: Link up\n", dev->name);
1045 			printk (KERN_INFO "%s: Link off\n", dev->name);
1512 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
1516 			printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");
1520 			printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");
1524 			printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");
1528 			printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");
1532 			printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");
1546 			printk (KERN_INFO "Operating at 1000 Mbps, ");
1549 			printk (KERN_INFO "Operating at 100 Mbps, ");
1552 			printk (KERN_INFO "Operating at 10 Mbps, ");
1561 		printk(KERN_INFO "Enable Tx Flow Control\n");
1563 		printk(KERN_INFO "Disable Tx Flow Control\n");
1565 		printk(KERN_INFO "Enable Rx Flow Control\n");
1567 		printk(KERN_INFO "Disable Rx Flow Control\n");
1639 			printk (KERN_INFO "Manual 100 Mbps, ");
1641 			printk (KERN_INFO "Manual 10 Mbps, ");
1682 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
1685 			printk (KERN_INFO "Auto 1000 Mbps, half duplex\n");
1698 		printk (KERN_INFO "Operating at 1000 Mbps, ");
1706 		printk(KERN_INFO "Enable Tx Flow Control\n");
1708 		printk(KERN_INFO "Disable Tx Flow Control\n");
1710 		printk(KERN_INFO "Enable Rx Flow Control\n");
1712 		printk(KERN_INFO "Disable Rx Flow Control\n");
1755 			printk (KERN_INFO "Manual full duplex\n");
1758 			printk (KERN_INFO "Manual half duplex\n");