media/i2c/tc358743.c

39 static int debug;
40 module_param(debug, int, 0644);
41 MODULE_PARM_DESC(debug, "debug level (0-3)");
173 	if (debug < 3)
313 		v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__);
317 		v4l2_dbg(1, debug, sd, "%s: no sync on signal\n", __func__);
363 	v4l2_dbg(2, debug, sd, "%s:\n", __func__);
370 	v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ?
394 	v4l2_dbg(2, debug, sd, "%s:\n", __func__);
408 		v4l2_dbg(2, debug, sd, "%s: no EDID -> no hotplug\n", __func__);
413 	v4l2_dbg(2, debug, sd, "%s:\n", __func__);
496 	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
520 	v4l2_dbg(3, debug, sd, "%s: %sable\n",
554 	v4l2_dbg(2, debug, sd, "%s:\n", __func__);
570 		v4l2_dbg(1, debug, sd, "%s: updating PLL clock\n", __func__);
638 		v4l2_dbg(2, debug, sd, "%s: YCbCr 422 16-bit\n", __func__);
650 		v4l2_dbg(2, debug, sd, "%s: RGB 888 24-bit\n", __func__);
661 		v4l2_dbg(2, debug, sd, "%s: Unsupported format code 0x%x\n",
685 	v4l2_dbg(3, debug, sd, "%s:\n", __func__);
997 		v4l2_dbg(1, debug, sd, "%s: No signal\n",
1003 		if (debug)
1027 	v4l2_dbg(2, debug, sd, "%s: cable connected = %d\n", __func__,
1055 	v4l2_dbg(3, debug, sd, "%s: AUDIO_INT = 0x%02x\n", __func__, audio_int);
1076 	v4l2_dbg(3, debug, sd, "%s: MISC_INT = 0x%02x\n", __func__, misc_int);
1108 	v4l2_dbg(3, debug, sd, "%s: CBIT_INT = 0x%02x\n", __func__, cbit_int);
1112 		v4l2_dbg(1, debug, sd, "%s: Audio sample rate changed\n",
1123 		v4l2_dbg(1, debug, sd, "%s: Audio present changed\n",
1146 	v4l2_dbg(3, debug, sd, "%s: CLK_INT = 0x%02x\n", __func__, clk_int);
1150 		v4l2_dbg(1, debug, sd, "%s: DE size or position has changed\n",
1181 	v4l2_dbg(3, debug, sd, "%s: SYS_INT = 0x%02x\n", __func__, sys_int);
1186 		v4l2_dbg(1, debug, sd, "%s: Tx 5V power present: %s\n",
1205 		v4l2_dbg(1, debug, sd, "%s: HDMI->DVI change detected\n",
1222 		v4l2_dbg(1, debug, sd, "%s: DVI->HDMI change detected\n",
1416 	v4l2_dbg(1, debug, sd, "%s: IntStatus = 0x%04x\n", __func__, intstatus);
1457 		v4l2_dbg(1, debug, sd,
1519 	v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status);
1535 	if (debug)
1540 		v4l2_dbg(1, debug, sd, "%s: no change\n", __func__);
1546 		v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__);
1594 	if (debug)
1600 		v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__);
1774 	v4l2_dbg(2, debug, sd, "%s, pad %d, start block %d, blocks %d\n",
2037 	v4l_dbg(1, debug, client, "chip found @ 0x%x (%s)\n",