#
c188df3d |
|
19-Feb-2024 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
media: i2c: replace of_graph_get_next_endpoint() From DT point of view, in general, drivers should be asking for a specific port number because their function is fixed in the binding. of_graph_get_next_endpoint() doesn't match to this concept. Simply replace - of_graph_get_next_endpoint(xxx, NULL); + of_graph_get_endpoint_by_regs(xxx, 0, -1); Link: https://lore.kernel.org/r/20240202174941.GA310089-robh@kernel.org Link: https://lore.kernel.org/r/9d1e99b0-892d-4a72-a9b3-886b8ed094b0@xs4all.nl Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
#
24b41af1 |
|
10-Jan-2024 |
Alexander Stein <alexander.stein@ew.tq-group.com> |
media: tc358743: register v4l2 async device only after successful setup Ensure the device has been setup correctly before registering the v4l2 async device, thus allowing userspace to access. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Fixes: 4c5211a10039 ("[media] tc358743: register v4l2 asynchronous subdevice") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
#
87399f1f |
|
10-Jan-2024 |
Alexander Stein <alexander.stein@ew.tq-group.com> |
media: tc358743: register v4l2 async device only after successful setup Ensure the device has been setup correctly before registering the v4l2 async device, thus allowing userspace to access. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Fixes: 4c5211a10039 ("[media] tc358743: register v4l2 asynchronous subdevice") Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240110090111.458115-1-alexander.stein@ew.tq-group.com
|
#
fae4280e |
|
25-Apr-2023 |
Alexander Stein <alexander.stein@ew.tq-group.com> |
media: tc358743: Add error code to error message Add the error code of a failed i2c transfer to the error message. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
#
aaeb31c0 |
|
14-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
media: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
#
6cb7d1b3 |
|
19-Sep-2022 |
Yang Yingliang <yangyingliang@huawei.com> |
media: Switch to use dev_err_probe() helper In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER. Reviewed-by: Sean Young <sean@mess.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
#
3028fb90 |
|
24-Aug-2022 |
Hans Verkuil <hverkuil-cisco@xs4all.nl> |
media: tc358743: limit msg.len to CEC_MAX_MSG_SIZE I expect that the hardware will have limited this to 16, but just in case it hasn't, check for this corner case. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
#
ed5c2f5f |
|
15-Aug-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
#
b9f7caa7 |
|
05-Jan-2022 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag MIPI CSI-2 continuous and non-continuous clock modes are mutually exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
#
6a7bdd89 |
|
03-Jan-2022 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
media: v4l2-mediabus: Use structures to describe bus configuration The media bus configuration is specified through a set of flags, some of which being mutually exclusive. This doesn't scale to express more complex configurations. Improve the API by replacing the single flags field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures. The flags themselves are still used in those structures, so they are kept here. Drivers are however updated to use structure fields instead of flags when already possible. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
#
94d964e5 |
|
03-Jan-2022 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
media: v4l2-fwnode: Move bus config structure to v4l2_mediabus.h To prepare for usage of the v4l2_fwnode_bus_* data structures to describe bus configuration in the subdev .get_mbus_config() operation, rename the structures with a v4l2_mbus_config_ prefix instead of v4l2_fwnode_bus_, and move them to v4l2_mediabus.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
#
0d346d2a |
|
10-Jun-2021 |
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
#
a6b1e709 |
|
15-May-2021 |
Zhen Lei <thunder.leizhen@huawei.com> |
media: tc358743: Fix error return code in tc358743_probe_of() When the CSI bps per lane is not in the valid range, an appropriate error code -EINVAL should be returned. However, we currently do not explicitly assign this error code to 'ret'. As a result, 0 was incorrectly returned. Fixes: 256148246852 ("[media] tc358743: support probe from device tree") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
#
6107a4fd |
|
06-Apr-2021 |
Yang Yingliang <yangyingliang@huawei.com> |
media: tc358743: fix possible use-after-free in tc358743_remove() This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
#
877cb8a4 |
|
02-Sep-2020 |
Tom Rix <trix@redhat.com> |
media: tc358743: cleanup tc358743_cec_isr tc358743_cec_isr is misnammed, it is not the main isr. So rename it to be consistent with its siblings, tc358743_cec_handler. It also does not check if its input parameter 'handled' is is non NULL like its siblings, so add a check. Fixes: a0ec8d1dc42e ("media: tc358743: add CEC support") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
#
274cf92d |
|
30-Aug-2020 |
Tom Rix <trix@redhat.com> |
media: tc358743: initialize variable clang static analysis flags this error tc358743.c:1468:9: warning: Branch condition evaluates to a garbage value return handled ? IRQ_HANDLED : IRQ_NONE; ^~~~~~~ handled should be initialized to false. Fixes: d747b806abf4 ("[media] tc358743: add direct interrupt handling") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
#
0c3da525 |
|
17-Jul-2020 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: i2c: Use the new get_mbus_config pad op Move the existing users of the g_mbus_config video operation to use the newly introduced get_mbus_config pad operations. All the ported drivers report a static media bus configuration and do no support s_mbus_config so the operation implementation has not changed. Bridge drivers needs to call the new pad operation and will receive an -ENOICTLCMD when calling the old g_mbus_config video operation Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
#
e6714993 |
|
10-Jul-2019 |
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> |
media: i2c: Convert to new i2c device probe() The I2C core framework provides a simplified probe framework from commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"). These drivers do not utilise the i2c_device_id table in the probe, so we can easily convert them to utilise the simplified i2c driver registration. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
2912289a |
|
08-Nov-2018 |
Hans Verkuil <hverkuil-cisco@xs4all.nl> |
media: adv*/tc358743/ths8200: fill in min width/height/pixelclock The v4l2_dv_timings_cap struct is used to do sanity checks when setting and enumerating DV timings, ensuring that only valid timings as per the HW capabilities are allowed. However, many drivers just filled in 0 for the minimum width, height or pixelclock frequency. This can cause timings with e.g. 0 as width and height to be accepted, which will in turn lead to a potential division by zero. Fill in proper values are minimum boundaries. 640x350 was chosen since it is the smallest resolution in v4l2-dv-timings.h. Same for 13 MHz as the lowest pixelclock frequency (it's slightly below the minimum of 13.5 MHz in the v4l2-dv-timings.h header). Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
0ede1794 |
|
08-Oct-2018 |
Nathan Chancellor <nathan@kernel.org> |
media: tc358743: Remove unnecessary self assignment Clang warns when a variable is assigned to itself. drivers/media/i2c/tc358743.c:1921:7: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] ret = ret; ~~~ ^ ~~~ 1 warning generated. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
6970d37c |
|
01-Jun-2018 |
Sakari Ailus <sakari.ailus@linux.intel.com> |
media: v4l: fwnode: Let the caller provide V4L2 fwnode endpoint Instead of allocating the V4L2 fwnode endpoint in v4l2_fwnode_endpoint_alloc_parse, let the caller to do this. This allows setting default parameters for the endpoint which is a very common need for drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
2d95e7ed |
|
03-Jul-2018 |
Sakari Ailus <sakari.ailus@linux.intel.com> |
media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHY The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
480b8b3e |
|
20-Sep-2018 |
Ville Syrjälä <ville.syrjala@linux.intel.com> |
video/hdmi: Pass buffer size to infoframe unpack functions To make sure the infoframe unpack functions don't end up examining stack garbage or oopsing, let's pass in the size of the buffer. v2: Convert tda1997x.c as well (kbuild test robot) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-3-ville.syrjala@linux.intel.com Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
|
#
db034018 |
|
14-Sep-2018 |
Hans Verkuil <hverkuil@xs4all.nl> |
media: replace ADOBERGB by OPRGB The CTA-861 standards have been updated to refer to opRGB instead of AdobeRGB. The official standard is in fact named opRGB, so switch to that. The two old defines referring to ADOBERGB in the public API are put under #ifndef __KERNEL__ and a comment mentions that they are deprecated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
9cfd2753 |
|
13-Sep-2018 |
Hans Verkuil <hans.verkuil@cisco.com> |
media: cec/v4l2: move V4L2 specific CEC functions to V4L2 Several CEC functions are actually specific for use with receivers, i.e. they should be part of the V4L2 subsystem, not CEC. These functions deal with validating and modifying EDIDs for (HDMI) receivers, and they do not actually have anything to do with the CEC subsystem and whether or not CEC is enabled. The problem was that if the CEC_CORE config option was not set, then these functions would become stubs, but that's not right: they should always be valid. So replace the cec_ prefix by v4l2_ and move them to v4l2-dv-timings.c. Update all drivers that call these accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <stable@vger.kernel.org> # for v4.17 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
64bac691 |
|
25-May-2018 |
Alexey Khoroshilov <khoroshilov@ispras.ru> |
media: tc358743: release device_node in tc358743_probe_of() of_graph_get_next_endpoint() returns device_node with refcnt increased, but these is no of_node_put() for it. The patch adds one on error and normal paths. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
55e5927e |
|
07-Feb-2018 |
Hans Verkuil <hansverk@cisco.com> |
media: i2c: add SPDX license info Replace the old license information with the corresponding SPDX license for those drivers Cisco authored. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
a88cd60f |
|
16-Oct-2017 |
Kees Cook <keescook@chromium.org> |
media: tc358743: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
9d39e46b |
|
17-Oct-2017 |
Philipp Zabel <p.zabel@pengutronix.de> |
media: tc358743: validate lane count The TC358743 does not support more than 4 data lanes. Check that the lane count is valid. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
f7480ad0 |
|
21-Sep-2017 |
Philipp Zabel <p.zabel@pengutronix.de> |
media: tc358743: set entity function to video interface bridge The TC358743 is an HDMI to MIPI CSI2-2 bridge. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
7996e5c4 |
|
28-Sep-2017 |
Dan Carpenter <dan.carpenter@oracle.com> |
media: tc358743: remove an unneeded condition We can remove the check for if "state->cec_adap" is NULL. The cec_allocate_adapter() function never returns NULL and also we verified that "state->cec_adap" is an error pointer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
3863d4bb |
|
17-Sep-2017 |
Jacob Chen <jacob-chen@iotwrt.com> |
media: i2c: tc358743: fix spelling mistake It should be "LP-11". Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
d17dd2db |
|
20-Sep-2017 |
Kees Cook <keescook@chromium.org> |
[media] media/i2c/tc358743: Initialize timer This converts to use setup_timer() to set callback and data, though it doesn't look like this would have worked with timer checking enabled since no init_timer() was ever called before. Cc: Mats Randgaard <matrandg@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
a0ec8d1d |
|
31-Aug-2017 |
Hans Verkuil <hans.verkuil@cisco.com> |
media: tc358743: add CEC support Add CEC support for the tc358743 HDMI-CSI bridge. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
2f8dfed8 |
|
19-Aug-2017 |
Arvind Yadav <arvind.yadav.cs@gmail.com> |
media: tc358743: constify i2c_device_id i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
c21e8b59 |
|
15-Jun-2017 |
Gustavo A. R. Silva <garsilva@embeddedor.com> |
[media] i2c: tc358743: remove useless variable assignment in tc358743_isr Remove useless variable assignment in function tc358743_isr(). The value stored in variable _intstatus_ at line 1299 is overwritten at line 1302, just before it can be used. Addresses-Coverity-ID: 1397678 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
4e66a52a |
|
02-Jun-2017 |
Dave Stevenson <dave.stevenson@raspberrypi.org> |
[media] tc358743: Add support for platforms without IRQ line interrupts is listed as an optional property in the DT binding, but in reality the driver didn't work without it. The existing driver relied on having the interrupt line connected to the SoC to trigger handling various events. Add the option to poll the interrupt status register via a timer if no interrupt source is defined. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
2da2391c |
|
02-Jun-2017 |
Dave Stevenson <dave.stevenson@raspberrypi.org> |
[media] tc358743: Setup default mbus_fmt before registering Previously the mbus_fmt_code was set after the device was registered. If a connected sub-device called tc358743_get_fmt prior to that point it would get an invalid code back. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
3cb0fe6f |
|
02-Jun-2017 |
Dave Stevenson <dave.stevenson@raspberrypi.org> |
[media] tc358743: Add enum_mbus_code There was no way to query the supported mbus formats from this driver. enum_mbus_code is the function to expose that, so implement it. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
43b288ba |
|
31-May-2017 |
Arvind Yadav <arvind.yadav.cs@gmail.com> |
[media] tc358743: Handle return value of clk_prepare_enable clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
859969b3 |
|
26-Aug-2016 |
Sakari Ailus <sakari.ailus@linux.intel.com> |
[media] v4l: Switch from V4L2 OF not V4L2 fwnode API Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs. Async OF matching is replaced by fwnode matching and OF matching support is removed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Benoit Parrot <bparrot@ti.com> # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c Tested-by: Hans Verkuil <hans.verkuil@cisco.com> # Atmel sama5d3 board + ov2640 sensor Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
4b0755e9 |
|
03-May-2017 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: fix register i2c_rd/wr function fix The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
f2c61f98 |
|
03-May-2017 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: fix register i2c_rd/wr function fix The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
c0746c1a |
|
22-Feb-2017 |
Javier Martinez Canillas <javier@osg.samsung.com> |
[media] tc358743: Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
fbd4676c |
|
13-Feb-2017 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: put lanes in STOP state before starting streaming Without calling tc358743_set_csi after stopping streaming (or calling tc358743_s_dv_timings or tc358743_set_fmt from userspace after stopping the stream), the i.MX6 MIPI CSI2 input fails waiting for lanes to enter STOP state when streaming is started again. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
3538aa6e |
|
08-Feb-2017 |
Arnd Bergmann <arnd@arndb.de> |
[media] tc358743: fix register i2c_rd/wr functions While testing with CONFIG_UBSAN, I got this warning: drivers/media/i2c/tc358743.c: In function 'tc358743_probe': drivers/media/i2c/tc358743.c:1930:1: error: the frame size of 2480 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] The problem is that the i2c_rd8/wr8/rd16/... functions in this driver pass a pointer to a local variable into a common function, and each call to one of them adds another variable plus redzone to the stack. I also noticed that the way this is done is broken on big-endian machines, as we copy the registers in CPU byte order. To address both those problems, I'm adding two helper functions for reading a register of up to 32 bits with correct endianess and change all other functions to use that instead. Just to be sure we don't get the problem back with changed optimizations in gcc, I'm also marking the new functions as 'noinline', although my tests with gcc-7 don't require that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
676c002a |
|
06-Dec-2016 |
Mats Randgaard <matrandg@cisco.com> |
[media] tc358743: ctrl_detect_tx_5v should always be updated The control for +5V Power detection must also be updated when the EDID is not present. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
0a1f0850 |
|
06-Dec-2016 |
Mats Randgaard <matrandg@cisco.com> |
[media] tc358743: Disable HDCP with "manual HDCP authentication" bit Originally Toshiba told us that the only way to disable HDCP was to set the receiver in repeater mode, that would make the authentication fail because of missing software support. It has worked fine with all the sources we and our customers has used, until it was reported problems with Apple MacBook (Retina, 12-inch, Early 2015) (https://support.apple.com/kb/SP712?locale=en_US&viewlocale=en_US) with Apple A1612 USB type-C multiport adapter (http://www.apple.com/shop/product/MJ1K2AM/A/usb-c-digital-av-multiport-adapter) Finally Toshiba came up with a hidden bit that is named "Manual HDCP authentication". In this patch the original "repeater mode" concept is removed, and the new bit is set instead. With his patch HDCP is disabled when connected to the Apple MacBook and all other sources we have tested so far. The Apple MacBook is constantly trying to authenticate, but fails and continues to transmit unencrypted video. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
59e34ba8 |
|
06-Dec-2016 |
Mats Randgaard <matrandg@cisco.com> |
[media] tc358743: Do not read number of CSI lanes in use from chip The number of CSI lanes that should be used is set to the CSI_CONTROL register by indirectly writing to the CSI_CONFW register. When the number of lanes is read back from the CSI_CONTROL register the value is usually correct, but we have seen that it suddenly is 1 for a short moment before the correct value is restored again. Toshiba have not figured out why that happen, but we have found it safer to store the value in the driver. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
1ce39546 |
|
02-Jul-2016 |
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> |
[media] tc358743: Remove deprecated create_singlethread_workqueue The workqueue "work_queues" enables hotplugging. It has a single work item(&state->delayed_work_enable_hotplug) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been sync cancelled in tc358743_remove() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
c040a71f |
|
22-Apr-2016 |
Hans Verkuil <hans.verkuil@cisco.com> |
[media] tc358743: drop bogus comment The control in question is not a private control, so drop that comment. Copy-and-paste left-over. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
72777724 |
|
22-Mar-2016 |
Hans Verkuil <hverkuil@xs4all.nl> |
[media] tc358743: zero the reserved array v4l2-compliance complained about this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
85e510a1 |
|
20-Feb-2016 |
Hans Verkuil <hverkuil@xs4all.nl> |
[media] tc358743: use - instead of non-ascii wide-dash character smatch complains about non-ascii characters. It turns out that a wide-dash character was used instead of the more common '-' character. Replace those dashes with -. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
fcae73fa |
|
10-Dec-2015 |
Mats Randgaard <matrandg@cisco.com> |
[media] tc358743: Use local array with fixed size in i2c write i2c_wr() is called from ops and the interrupt service routine, while state->wr_data is shared and unprotected, and could be overwritten. This shared buffer is therefore replaced with a local array with fixed size. The array has the size of one EDID block (128 bytes) + 2 bytes i2c address, and the EDID is written block by block (up to 8 blocks). Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
2874bf3e |
|
09-Dec-2015 |
Mats Randgaard <matrandg@cisco.com> |
[media] tc358743: Print timings only when debug level is set Prevent unnecessary kernel log spamming. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
ab22e77c |
|
11-Dec-2015 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] media framework: rename pads init function to media_entity_pads_init() With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
18095107 |
|
06-Aug-2015 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] media: get rid of unused "extra_links" param on media_entity_init() Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
85f9e06c |
|
13-Nov-2015 |
Hans Verkuil <hverkuil@xs4all.nl> |
[media] v4l2-dv-timings: add new arg to v4l2_match_dv_timings Add the new match_reduced_fps argument to v4l2_match_dv_timings(). Depending on the situation you may or may not desire to match the reduced_fps flag. Typically only HDMI transmitters will need to check for this flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
b5dcee22 |
|
09-Nov-2015 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] include/media: split I2C headers from V4L2 core Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
|
#
cfd34ed8 |
|
21-Aug-2015 |
Fengguang Wu <fengguang.wu@intel.com> |
[media] i2c: fix platform_no_drv_owner.cocci warnings drivers/media/i2c/tc358743.c:1960:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
abeaca0f |
|
20-Aug-2015 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: only queue subdev notifications if devnode is set Hardware interrupts are enabled in the probe function, before the subdev is registered to its v4l2_device. Until v4l2_device_register_subdev_node is called, sd->devnode is NULL and v4l2_subdev_notify_event must not be called. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
1e137d92 |
|
18-Aug-2015 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
[media] tc358743: make reset gpio optional Commit 256148246852 ("[media] tc358743: support probe from device tree") specified in the device tree binding documentation that the reset gpio is optional. Make the implementation match accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
06d3f2e0 |
|
18-Aug-2015 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
[media] tc358743: set direction of reset gpio using devm_gpiod_get Commit 256148246852 ("[media] tc358743: support probe from device tree") failed to explicitly set the direction of the reset gpio. Use the optional flag of devm_gpiod_get to make up leeway. This is also necessary because the flag parameter will become mandatory soon. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
1d88f831 |
|
10-Aug-2015 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] tc358743: don't use variable length array for I2C writes drivers/media/i2c/tc358743.c:148:19: warning: Variable length array is used. As the maximum size is 1026, we can't use dynamic var, as it would otherwise spend 1056 bytes of the stack at i2c_wr() function. So, allocate a buffer with the allowed maximum size together with the state var. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
b0527115 |
|
20-Jul-2015 |
Hans Verkuil <hverkuil@xs4all.nl> |
[media] tc358743: remove unused variable The bt pointer was never used, remove it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
1140f919 |
|
16-Jul-2015 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: allow event subscription This is useful to subscribe to HDMI hotplug events via the V4L2_CID_DV_RX_POWER_PRESENT control. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
d747b806 |
|
17-Jul-2015 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: add direct interrupt handling When probed from device tree, the i2c client driver can handle the interrupt on its own. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
25614824 |
|
17-Jul-2015 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: support probe from device tree Add support for probing the TC358743 subdevice from device tree. The reference clock must be supplied using the common clock bindings. MIPI CSI-2 specific properties are parsed from the OF graph endpoint node and support for a non-continuous MIPI CSI-2 clock is added. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
8ec23da7 |
|
17-Jul-2015 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: enable v4l2 subdevice devnode Add V4L2_SUBDEV_FL_HAS_DEVNODE to subdev flags, in order to enable a subdev device node. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
4c5211a1 |
|
17-Jul-2015 |
Philipp Zabel <p.zabel@pengutronix.de> |
[media] tc358743: register v4l2 asynchronous subdevice Add support for registering the sensor subdevice using the v4l2-async API. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
d32d9864 |
|
09-Jul-2015 |
Mats Randgaard <matrandg@cisco.com> |
[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge The driver is tested on our hardware and all the implemented features works as expected. Missing features: - CEC support - HDCP repeater support - IR support Signed-off-by: Mats Randgaard <matrandg@cisco.com> [hans.verkuil@cisco.com: updated copyright year to 2015] [hans.verkuil@cisco.com: update confusing confctl_mutex comment] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|