Lines Matching defs:speed
218 /* bus type/speed/width */
735 * e1000_phy_force_speed_duplex_82543 - Force speed/duplex for PHY
738 * Calls the function to force speed and duplex for the m88 PHY, and
739 * if the PHY is not auto-negotiating and the speed is forced to 10Mbit,
1057 * Configures the link for auto-neg or forced speed and duplex. Then we check
1071 * With 82543, we need to force speed and duplex on the MAC
1072 * equal to what the PHY speed and duplex configuration is.
1203 u16 speed, duplex;
1225 * If we are forcing speed/duplex, then we can return since
1230 * If speed and duplex are forced to 10H or 10F, then we will
1252 * Speed Detection takes care of MAC speed/duplex
1255 * speed/duplex on the MAC to the current PHY speed/duplex
1281 * partner capability register. We use the link speed to determine if
1283 * at gigabit speed, then TBI compatibility is not needed. If we are
1284 * at gigabit speed, we turn on TBI compatibility.
1287 ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
1289 DEBUGOUT("Error getting link speed and duplex\n");
1292 if (speed != SPEED_1000) {
1294 * If link speed is not set to gigabit speed,
1415 /* Set the bits to force speed and duplex */
1435 * Set up speed in the Device Control register depending on