dev/mxge/mxge_mcp.h

84   uint32_t data0;	/* will be low portion if data > 32 bits */
197   /* data0 = LSW of the host address
212   /* data0 = slice number if multiple slices are used */
262      data0,data1 = DMA address
273      data0,MSH(data1) = multicast group address */
278      data0,MSH(data1) = multicast group address */
283   /* data0, data1 = bus addr,
300   /* data0 = number of big buffers to use.  It must be 0 or a power of 2.
311   /* data0 = number of slices n (0, 1, ..., n-1) to enable
327   /* data0, data1 = bus address lsw, msw */
337   /* data0 = enable/disable rss
363   /* data0 = TSO mode.
371   /* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */
373   /* data0 = dev_addr,  data1 = register/addr, data2 = value  */
378    *   data0 :  0 => get one byte, 1=> get 256 bytes
379    *   data1 :  If data0 == 0: location to refresh
383    *            If data0 == 1: unused
391    *   data0 : index of the desired table entry
401   /* data0 = mcp_slot type to use.
410      data0 = throttle_factor
435   /* data0 = filter_id << 16 | queue << 8 | type */
439   /* data0 = filter_id */