arm64: zynqmp: Switch to amd.com emails

Update my and DPs email address to match current setup.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com

tools: zynqmp_psu_init_minimize: Move helper functions below header includes

Move helper functions below header includes to avoid forward
declarations.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-14-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

tools: zynqmp_psu_init_minimize: Use CR instead of LF

Use carriage return instead of line feed to support mangling across
lines.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-13-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

tools: zynqmp_psu_init_minimize: Remove low level uart settings

There is no reason to do serial initialization. Uart driver does it
already based on DT. Good effect is that it is clear which interface is
console.
The resulting change was done in past by commit 84d2bbf082fa ("arm64:
zynqmp: Remove low level UART setting").

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-12-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize: Move helper functions below header includes

Move helper functions below header includes to avoid forward
declarations.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-14-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

tools: zynqmp_psu_init_minimize: Use CR instead of LF

Use carriage return instead of line feed to support mangling across
lines.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-13-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

tools: zynqmp_psu_init_minimize: Remove low level uart settings

There is no reason to do serial initialization. Uart driver does it
already based on DT. Good effect is that it is clear which interface is
console.
The resulting change was done in past by commit 84d2bbf082fa ("arm64:
zynqmp: Remove low level UART setting").

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-12-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

tools: zynqmp_psu_init_minimize.sh: fix return lines coding style

Remove unneeded parenthess around return value. E.g.:
return (0); -> return 0;

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: add tool to minimize psu_init_gpl.c files

This script transforms a pair of psu_init_gpl.c and .h files produced by
the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
is almost checkpatch compliant.

Based on a script by Michal Simek.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: Do not remove dpll_prog from psu_init

dpll_prog is available in some psu_init files that's why this function
should stay there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>