patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>

patman: Move library functions into a library directory

The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Correct pylint errors

Fix pylint errors that can be fixed and mask those that seem to be
incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>

buildman: Add helper functions for updating .config files

At present the only straightforward way to write tests that need a
slightly different configuration is to create a new board with its own
configuration. This is cumbersome.

It would be useful if buildman could adjust the configuration of a build
on the fly. In preparation for this, add a utility library which can
modify a .config file according to various parameters passed to it.

Signed-off-by: Simon Glass <sjg@chromium.org>