Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

test: Remove <common.h> and add needed includes

Remove <common.h> from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

test: Remove <common.h> and add needed includes

Remove <common.h> from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Remove <common.h> and add needed includes

Remove <common.h> from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Remove <common.h> and add needed includes

Remove <common.h> from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Remove <common.h> and add needed includes

Remove <common.h> from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Remove <common.h> and add needed includes

Remove <common.h> from all "test/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Add a test for VBE device tree fixups

When a FIT includes some OS requests, U-Boot should process these and add
the requested info to corresponding subnodes of the /chosen node. Add a
pytest for this, which sets up the FIT, runs bootm and then uses a C
unit test to check that everything looks OK.

The test needs to run on sandbox_flattree since we don't support
device tree fixups on sandbox (live tree) yet. So enable BOOTMETH_VBE and
disable bootflow_system(), since EFI is not supported on
sandbox_flattree.

Add a link to the initial documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>

vbe: Use a manual test

Use a manual test for the VBE test, so we can make the pytest and the
C unit test work together properly.

Signed-off-by: Simon Glass <sjg@chromium.org>

test: Update tests to use the skip feature

Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.

A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.

Signed-off-by: Simon Glass <sjg@chromium.org>