efi_loader: Remove <common.h>

We largely do not need <common.h> in these files, so drop it. The only
exception here is that efi_freestanding.c needs <linux/types.h> and had
been getting that via <common.h>.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

efi_loader: use %pUs for printing GUIDs

For printing GUIDs with macro EFI_ENTRY use %pUs instead of %pUl to provide
readable debug output.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: use %pUs for printing GUIDs

For printing GUIDs with macro EFI_ENTRY use %pUs instead of %pUl to provide
readable debug output.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: remove EFI_HII_CONFIG_ROUTING_PROTOCOL

Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi_loader: debug output for HII protocols

For correct indention use EFI_PRINT() instead of debug().

For printing efi_uintn_t or size_t use the %zu or %zx format code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

efi: hii: add HII config routing/access protocols

This patch is a place holder for HII configuration routing protocol and
HII configuration access protocol.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>