tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Remove use of build-time TPM versions

There is only one place in the code which assumes at build-time that we
are using either a v1 or a v2 TPM. Fix this up and add a new function to
return the version of a TPM.

Supported TPM versions (v1 and v2) can be enabled independently and it is
possible to use both versions at once. This is useful for sandbox when
running tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Convert to use a device parameter

At present many TPM calls assume there is only one TPM in the system and
look up this TPM themselves. This is inconsistent with driver model, which
expects all driver methods to have a device parameter. Update the code to
correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Export the open/close functions

At present these functions are not accessible outside the TPM library, but
in some cases we need to call them. Export them in the header file and add
a define for the SHA1 digest size.

Also adjust tpm_open() to call tpm_close() first so that the TPM is in a
known state before opening (e.g. by a previous phase of U-Boot).

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Add a constant for the minimum supported digest size

When SHA1 is used we need 20 bytes for the digest size. Add a constant so
that clients can make use of this, e.g. to allocate local buffers.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: Implement tpm_auto_start() for TPMv1.2

Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

tpm: Allow reporting the internal state

It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

tpm: Add TPM2 support for read/write values

Implement this API function for TPM2.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

tpm: add a helper to iterate on all tpm devices

This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

tpm: Export tpm_clear_and_reenable()

This function is intended to be exported but is not. Add it to the header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>